Memorex MVD2037 User Manual

Before operating this product,

please read these instructions completely.

User’s Guide

DVD/VCD/MP3/PHOTO CD Player

MVD2037

Contents..................................................................1

Important Safety Instructions ...............................2

Precautions.............................................................5

Power Source .........................................................5

Location of Controls ..............................................6

• Front....................................................................6

• Rear ....................................................................6

• Remote ...............................................................7

Remote Control ......................................................8

• Battery Installation ..............................................8

•Effective Distance of the Remote

Control Transmitter .............................................8

Connection..............................................................9

• Connecting the DVD to a TV Using the

Audio/Video Output Jacks ..................................9

• Connecting the DVD to a TV Using the

S-Video Output Jack...........................................9

• Connecting the DVD to a TV Using the
Y/P

B/PR

Jacks ..................................................10

• Progressive (Y, P

B, PR) VIDEO OUT ...............10

• 525 Line Digital Progressive-scan Component

Video Output.....................................................10

• Connecting the DVD to a Home

Theatre System.................................................11

About Discs ..........................................................12

Setup Menu ...........................................................14

• General Setup Menu.........................................15

• Speaker Setup Menu ........................................16

• Dolby Digital Setup Menu .................................17

• Preferences Menu.............................................17

Basic Operation....................................................20

• 3D Sound..........................................................20

• Audio Mode.......................................................20

• Mute ..................................................................20

• Display ..............................................................20

DVD Basic Operation ...........................................21

• Playback of a DVD............................................21

• Skip ...................................................................22

• Search...............................................................22

• Slow/R and Slow/F ...........................................22

• Pause/Step .......................................................22

•Title/Chapter Search.........................................23

•Title/Time Search ..............................................23

• Repeat Playback...............................................23

• A-B Playback ....................................................23

• Audio Menu.......................................................24

• Subtitle Menu....................................................24

• DVD Menu ........................................................24

•Title Menu .........................................................24

• Zoom.................................................................24

• Angle.................................................................24

MP3 BASIC OPERATION .....................................25

• Playback of an MP3..........................................25

• Selecting Folders/Tracks using the SKIP

Buttons..............................................................26

• Selecting Folders/Tracks using the

Number Buttons................................................26

• Forward/Reverse ..............................................26

• Repeat Play ......................................................26

• MP3 FAQs.........................................................26

CD/VCD BASIC OPERATION ...............................27

• Playback of a CD/VCD .....................................27

• Selecting Tracks/Files using the

Number Buttons................................................27

• Selecting Tracks/Files using the SKIP

Buttons..............................................................27

• Forward/Reverse ..............................................28

• Repeat One/All Play .........................................28

• Repeat A-B Play ...............................................28

• Random Playback.............................................28

• Programmed Playback......................................29

• PBC (VCD Only) ...............................................29

PICTURE CD BASIC OPERATION.......................30

Troubleshooting Guide........................................31

Care and Maintenance .........................................33

Specifications .......................................................34

1

CONTENTS

2

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION:

THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A
LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT,
PLEASE READ THIS OWNER’S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE
PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM,
DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

FCC NOTICE:

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV
technician for help.

FCC CAUTION:

To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Also, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s authority
to operate the equipment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

3

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.

6. ATTACHMENTS

Do not use attachments not recommended by the product's manufacturer as they may cause hazards.

7. WATER AND MOISTURE

Do not use this product near water-for example: near a bathtub, washbowl, kitchen sink, or laundry tub;
in a wet basement; or near a swimming pool.

8. ACCESSORIES

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCES

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.

13. LIGHTNING

To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

IMPORTANT:

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX.

  
    !

should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirements for grounding electrode.

18. SERVICING

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.

21. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE

Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.

4

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE








 

  

    



 
    


 



 
  

 
  

5

PRECAUTIONS

POWER SOURCE

Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.

NOTES ON HANDLING:

• When shipping the DVD player, always use the
original shipping carton and packing materials. For
maximum protection, repack the unit as it was
originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.

• The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.

• When the DVD player is not in use, be sure to remove
the disc and turn off the power.

• If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.

NOTES ON LOCATING THE DVD PLAYER:

• When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.

NOTES ON CLEANING:

Use a soft, dry cloth for cleaning.

• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.

• If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.

Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.

NOTES ON MOISTURE CONDENSATION:

Moisture condensation damages the DVD player.
Please read the following carefully.

• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
player.

Moisture Condensation occurs during the following
cases:

•When you bring the DVD player directly from a cold
place to a warm place.

•When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.

•In summer, when you use the DVD player in a hot and
humid place just after you moved the unit from an air
conditioned room.

•When you use the DVD player in a humid place.

Do not use the DVD player when moisture
condensation may occur.

• If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for two
or three hours. After two or three hours, the DVD player
will have warmed up and evaporated any moisture. Keep
the DVD player connected to the wall outlet and moisture
condensation will seldom occur.

TO OBTAIN A CLEAR PICTURE:

The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain a
clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.

AC Outlet

AC Plug

1. Power ON Backlight

2. STANDBY Indicator

3. STANDBY Button

4. Disc Tray

5. OPEN/CLOSE Button

6. Remote Sensor

7. SKIP ( ) and ( ) Buttons

8. PAUSE ( ) Button

9. Display

10. STOP (■) Button

11. PLAY () Button

6

LOCATION OF CONTROLS

FRONT

1. Stereo Audio Left/Right Output Jacks

2. Video Output Jack

3. S-Video Output Jack

4. Coaxial Digital Audio Output Jack

5. Component Video (Y, P

B, PR) Output Jacks

6. PROGRESSIVE SCAN ON/OFF Switch

7. AC Power Cord

REAR

32 41 17 8 9 10 115 6

1 2 3 4 65 7

7

LOCATION OF CONTROLS (CONTINUED)

1. DISPLAY Button

2. MUTE Button

3. REPEAT Button

4. RANDOM Button

5. SLOW/F Button

6. SLOW/R Button

7. PLAY () Button

8. PAUSE/STEP Button

9. SKIP ( ) Button

10. Navigation () Button

11. ENTER Button

12. Navigation (¥) Button

13. Navigation () Button

14. RETURN Button

15. TITLE MENU Button

16. DVD MENU Button

17. ANGLE Button

18. 3D Button

19. PBC Button

20. SEARCH Button

21. Number (0–9) Buttons

22. OPEN/CLOSE Button

23. STANDBY ON/OFF Button

24. Repeat A-B Button

25. PROGRAM Button

26. SEARCH

¥¥

Button

27. SEARCH



Button

28. STOP (■) Button

29. SKIP ( ) Button

30. Navigation () Button

31. SETUP Button

32. SUBTITLE MENU Button

33. AUDIO MENU Button

34. ZOOM Button

35. AUDIO MODE Button

36. CLEAR Button

REMOTE

4

7

4

1
2
3
4
5
6
7
8

9

10

11
12

13
14

15
16

17
18

19
20

21

22
23
2
25
26
2

28

29

30

31

32
33

3
35

36

8

REMOTE CONTROL

BATTERY INSTALLATION

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

NOTES:

• When there is an obstacle
between the DVD and the
transmitter, the transmitter may
not operate.

• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the DVD, the
remote operation may be
unstable.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)

1.

Open the battery compartment cover by pushing in on the tab and
lifting it out.

2. Install two (2) “AA” batteries (not included), paying attention to the
polarity diagram in the battery compartment.

3. Replace the battery compartment cover.

–

+

+

–

20ft

45 45

9

CONNECTION

CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES FOR CONNECTING TO A TV:

• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.

• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.

• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.

• Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.

• After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page

20.)

To
Video In

From

Audio

Out

Audio Cable (Included)

Video Cable (Included)

From
Video Out

Audio In

To

Audio In

To

To S-Video In

Audio Cable (Included)

From

Audio

Out

S-Video Cable (Not Included)

From

S-Video

Out

10

CONNECTION (CONTINUED)

CONNECTING THE DVD TO A TV USING THE Y/P

B/PR JACKS

PROGRESSIVE (Y, PB, PR) VIDEO OUT:

Use these jacks to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON.
Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video­grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.

525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT

Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.

NOTES:

• If you connect a TV that is not compatible with a progressive scan signal and set the PROGRESSIVE SCAN switch is

in the ON position, you will not be able to see any picture at all. To regain the picture, you must shut the unit off and set
the PROGRESSIVE SCAN switch to the OFF position. Then, turn the unit on and the picture will appear.

• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE
SCAN SWITCH TO “OFF”.

NOTES FOR CONNECTING TO A TV:

• TV must have Y, PB and PR input jacks.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.

• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.

• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.

• If using a TV with a blue screen option, turn the option off, on the TV for best results.

To

Audio In

Audio Cable (Included)

From

Audio

Out

To

Component

Video In

Y

P

B

PR

From
Component
Video Out

Component Cable
(Not Included)