Memorex MVD2029 User Manual

DVD/VCD/MP3/PHOTO CD Player

MODEL MVD2029

BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY.

OPERATING INSTRUCTIONS

Contents..................................................................1

Important Safety Instructions ...............................2

Precautions.............................................................5

Power Source .........................................................5

Location of Controls ..............................................6

• Front....................................................................6

• Rear ....................................................................6

• Remote ...............................................................7

Remote Control ......................................................8

• Battery Installation ..............................................8

• Effective Distance of the Remote

Control Transmitter .............................................8

Connection..............................................................9

• Connecting the DVD to a TV Using the

Audio/Video Output Jacks ..................................9

• Connecting the DVD to a TV Using the

S-Video Output Jack...........................................9

• Connecting the DVD to a TV Using the

Y/PB/PR Jacks..................................................10

• Connecting the DVD to a Home

Theatre System.................................................11

About Discs ..........................................................12

Setup Menu ...........................................................14

• General Menu ...................................................15

• Speaker Setup Menu ........................................16

• Preferences Menu.............................................17

Basic Operation....................................................20

• 3D Sound..........................................................20

• Audio Mode.......................................................20

• Mute ..................................................................20

• Display ..............................................................20

DVD Basic Operation ...........................................21

• Playback of a DVD............................................21

• Slow/R and Slow/F ...........................................22

• Skip ...................................................................22

• Search...............................................................22

• Pause/Step .......................................................22

• Title/Chapter Search.........................................23

• Title/Time Search ..............................................23

• Repeat Playback...............................................23

• A-B Playback ....................................................23

• Audio Menu.......................................................24

• Subtitle ..............................................................24

• DVD Menu ........................................................24

• Title Menu .........................................................24

• Zoom.................................................................24

• Angle.................................................................24

MP3 BASIC OPERATION .....................................25

• Playback of an MP3..........................................25

• Selecting Folders/Tracks using the

Number Buttons................................................25

• Selecting Folders/Tracks using the SKIP

Buttons..............................................................26

• Forward/Reverse ..............................................26

• Repeat Play ......................................................26

• MP3 FAQs.........................................................26

CD/VCD BASIC OPERATION ...............................27

• Playback of a CD/VCD .....................................27

• Selecting Tracks/Files using the

Number Buttons................................................27

• Selecting Tracks/Files using the SKIP

Buttons..............................................................27

• Forward/Reverse ..............................................28

• Repeat One/All Play .........................................28

• Repeat A-B Play ...............................................28

• Random Playback.............................................28

• Programmed Playback......................................29

• PBC (VCD Only)...............................................29

PICTURE CD BASIC OPERATION.......................30

Troubleshooting Guide........................................31,32

Care and Maintenance.........................................33

Specifications.......................................................34

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ﬂash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION:

THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. ATTACHMENTS

Do not use attachments not recommended by the product's manufacturer as they may cause hazards.

7. WATER AND MOISTURE

Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCES

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. LIGHTNING

To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

IMPORTANT:

PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.

PORTABLE CART WARNING (symbol provided by RETAC)

should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to grounding electrodes, and requirements for grounding electrode.

18. SERVICING

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

22. DAMAGE REQUIRING SERVICE

Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or the cabinet has been damaged. f. When the product exhibits a distinct change in performance - this indicates a need for service.

23. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

24. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

NEC - NATIONAL ELECTRICAL CODE

S2898A

ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

PRECAUTIONS

POWER SOURCE

Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not ﬁt into a nonpolarized AC outlet, do not ﬁle or cut the wide blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.

NOTES ON HANDLING:

• When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.

• The top and rear panels of the DVD player may become warm after a long period of use. This is normal and not a malfunction.

• When the DVD player is not in use, be sure to remove the disc and turn off the power.

• If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally.

NOTES ON LOCATING THE DVD PLAYER:

• When you place this DVD player near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the DVD player away from the TV, radio, or VCR.

NOTES ON CLEANING:

Use a soft, dry cloth for cleaning.

• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzine, as they may damage the surface of the DVD player.

• If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.

Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed by a qualified service technician.

NOTES ON MOISTURE CONDENSATION

Moisture condensation damages the DVD player. Please read the following carefully.

• Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.

• Moisture Condensation occurs during the following cases:

•When you bring the DVD player directly from a cold place to a warm place.

•When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

•In summer, when you use the DVD player in a hot and humid place just after you move the unit from an air conditioned room.

•When you use the DVD player in a humid place.

Do not use the DVD player when moisture condensation may occur.

• If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the DVD player to the wall outlet, turn on the DVD player and leave it “ON” for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur.

TO OBTAIN A CLEAR PICTURE:

The DVD player is a high technology, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

AC Outlet

AC Plug

1. POWER Button

2. STANDBY Indicator

3. Disc Tray

4. OPEN/CLOSE Button

5. STOP (■) Button

6. SKIP ( ) and ( ) Buttons

7. PAUSE ( ) Button

8. PLAY (❿) Button

9. Remote Sensor

10. Display

LOCATION OF CONTROLS

FRONT

1. Stereo Audio Left/Right Output Jacks

2. Video Output Jack

3. S-Video Output Jack

4. Coaxial Digital Audio Output Jack

5. Component Video (Y, PB, PR) Output Jacks

6. AC Power Cord

REAR

1 3 4 5 6 7 8 9 102

1 2 3 4 5 6

LOCATION OF CONTROLS (CONTINUED)

1. DISPLAY Button

2. Number (0–9) Buttons

3. TITLE MENU Button

4. 3D Button

5. ANGLE Button

6. SETUP Button

7. Navigation () Button

8. Navigation (➛) Button

9. PLAY (❿) Button

10. Navigation (❷) Button

11. RETURN Button

12. PBC Button

13. SEARCH Button

14. SLOW/R Button

15. STOP (■) Button

16. PAUSE/STEP Button

17. SKIP ( ) Button

18. RANDOM Button

19. SEARCH

➛➛

Button

20. MUTE Button

21. OPEN/CLOSE Button

22. POWER/STANDBY Button

23. DVD MENU Button

24. CLEAR Button

25. AUDIO MENU Button

26. SUBTITLE MENU Button

27. ZOOM Button

28. AUDIO MODE Button

29. Navigation (❿) Button

30. ENTER Button

31. PROGRAM Button

32. SLOW/F Button

33. SKIP ( ) Button

34. SEARCH

❿❿

Button

35. Repeat A-B Button

36. REPEAT Button

REMOTE

122

10 11

12 13

14 15

16 17

18 19

3 4

5 6

7 8 9

24 25 26 27

28 29 30 31

32 33 34 35

REMOTE CONTROL

BATTERY INSTALLATION

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

NOTES:

• When there is an obstacle between the DVD and the transmitter, the transmitter may not operate.

• When direct sunlight, an incandescent lamp, ﬂuorescent lamp or any other strong light shines on the REMOTE SENSOR of the DVD, the remote operation may be unstable.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Use only the size and type of batteries speciﬁed.

2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Open the battery compartment cover by sliding it out.

2. Install two (2) “AA” batteries, paying attention to the polarity diagram in the battery compartment.

3. Replace the battery compartment cover.

–

20ft

45° 45°

CONNECTION

CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES FOR CONNECTING TO A TV:

• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.

• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.

• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.

• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be distorted because DVD video discs are copy protected.

• Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.

• After connecting, press the AUDIO MODE button to the desired audio setting.

Audio In

To Video In

Audio Cable (Included)

Video Cable (Included)

From 

Audio 

Out

From  Video Out

From

Audio

Out

Audio Cable (Included)

S-Video Cable (Not Included)

From

S-Video

Out

Audio In

To S-Video In

CONNECTION (CONTINUED)

CONNECTING THE DVD TO A TV USING THE Y/PB/PR JACKS

NOTES FOR CONNECTING TO A TV:

• TV must have Y, PB and PR input jacks.

• Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.

• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.

• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be distorted because DVD video discs are copy protected.

• If using a TV with a blue screen option, turn the option off on the TV for best results.

Component

Video In

Audio In

Audio Cable (Included)

Component Cable (Not Included)

From

Audio

Out

From Component Video Out

+ 25 hidden pages