Memorex MVBD2520-R User Manual

MVBD2520-R Blu-Ray Player

User Manual

CONTENTS

Contents..................................................................1

mportant Safety Instructions ...............................2

Precautions.............................................................4

Power Source .........................................................4

Features ..................................................................5

Location of Controls ..............................................6

• Front....................................................................6

• Rear ....................................................................6

• Remote ...............................................................7

Remote Control ......................................................8

• Battery Installation ..............................................8

• Effective Distance of the Remote

Control Transmitter .............................................8

Connection..............................................................9

• Connecting the Player to a TV Using the

Audio/Video Output Jacks ..................................9

• Connecting the Player to a TV Using the

Y/Pb/Pr Jacks ...................................................10

• Progressive (Y, Pb, Pr) Video Output ...............10

• Connecting the Player to a TV Using the

HDMI Output Jack.............................................11

• Connecting the Player to a TV and Receiver

Using the HDMI Output Jack ............................12

• Connecting the Player to a TV Using a

DVI Cable..........................................................13

• Connecting the Player to a Home Theater

System (via Coaxial or Optical Jack)................14

• Connecting the Player to a Network .................15

BD-Live..................................................................16

About Discs ..........................................................17

Setup Menu ...........................................................19

• Navigating the Menus .......................................19

• General Setup Menu.........................................19

• Language Setup Menu .....................................21

• Security Setup Menu ........................................23

• Network Setup Menu ........................................25

• Display Setup Menu..........................................27

• Audio Setup Menu ............................................29

• Information Menu ..............................................30

Basic Operation (General) ...................................31

• HDMI Reset ......................................................31

• Color Buttons ....................................................31

• Mute ..................................................................31

• OSC (On-Screen Controls) Button ...................31

BD/DVD Operation................................................32

Playback of a Blu-ray Disc or Standard DVD...32

•

• Skip ...................................................................33

• Search...............................................................33

• Pause................................................................33

• Slow Motion ......................................................33

• Display ..............................................................33

• Top Menu Button...............................................34

• Pop-Menu/Title Button ......................................34

• Time Search......................................................34

• Title/Chapter Search .........................................34

• Repeat Playback...............................................35

• A-B Repeat Playback........................................35

• Zoom.................................................................35

• Angle.................................................................35

• Subtitle ..............................................................36

• Audio.................................................................36

• Random ............................................................36

• PIP (Picture in Picture) .....................................36

• Bookmark..........................................................37

• Programmed Playback......................................38

CD Operation ........................................................39

• Playback of a CD..............................................39

• Selecting Tracks Using the Number Buttons....40

• Selecting Tracks Using the Skip Buttons..........40

• Forward/Reverse Search ..................................40

• Time Search......................................................40

• Track Search.....................................................40

• Repeat Playback...............................................41

• A-B Repeat Playback........................................41

• Random ............................................................41

• Display ..............................................................41

• Programmed Playback......................................42

Data CD/USB/SD Card Operation .......................43

• Playback of a Data Disc/USB/SD Card ............43

• MP3/WMA.........................................................44

• Photos (JPEG) ..................................................45

• Digest................................................................45

• Playlists.............................................................46

Updating the Firmware ........................................47

Troubleshooting Guide........................................48

Care and Maintenance .........................................50

Specifications .......................................................51

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

C REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This Caution Marking is located at the rear enclosure of the unit.

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

aintenance (servicing) instructions in the

m literature accompanying the appliance.

The symbol for class II (Double Insulation)

CAUTION:

THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.

LASER WARNING:

Thi s unit e mploys a laser. O nly qualif ied s ervice personnel should attempt to service this device due to possible eye injury.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTSHD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions.

. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat source such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the Power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids such as vases shall be placed on the apparatus. Maintain well-ventilated conditions around the product. Do not place on a bed, sofa, or anything that blocks ventilation.

Where the main plug is used as the disconnect device, the disconnect device shall remain readily operable.

PRECAUTIONS

AC Plug

AC Outlet

NOTES ON HANDLING:

• When shipping the player, always use the original shipping carton and packing materials. For maximum

rotection, repack the unit as it was originally packed at

p the factory.

• Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the player for a long time. They will leave marks on the finish.

• The top and rear panels of the player may become warm after a long period of use. This is normal and not a malfunction.

• When the player is not in use, be sure to remove the disc and turn off the power.

• If you do not use the player for a long period, the unit may not function properly in the future. Turn on and use the player occasionally.

LOCATING THE PLAYER:

When you place this player near a TV, radio or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the player away from the TV, radio or VCR.

NOTES ON CLEANING:

Use a soft, dry cloth for cleaning.

• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner or benzene, as it may damage the surface of the player.

• If you use a chemical-saturated cloth to clean the unit, follow that product’s instructions.

Warning: Cleaning and adjustment of lenses and/or other components of playback mechanism should be performed by a qualified service technician.

TO OBTAIN A CLEAR PICTURE:

The player is a high technology, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

NOTES ON MOISTURE CONDENSATION:

Moisture condensation damages the player. Please read the following carefully.

• Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the player.

Moisture condensation occurs during the following cases:

• When you bring the player directly from a cold place to a warm place.

• When you use the player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.

• In summer, when you use the player in a hot and humid place just after you moved the unit from an air conditioned room.

• When you use the player in a humid place.

Do not use the player when moisture condensation may occur.

• If you use the player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the player to the wall outlet, turn on the player and leave it “ON” for two or three hours. After two or three hours, the player will have warmed up and evaporated any moisture. Keep the player connected to the wall outlet and moisture condensation will seldom occur.

POWER SOURCE

Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz.

NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not ﬁt into a nonpolarized AC outlet, do not ﬁle or cut the wide blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.

FEATURES

This unit has many features, some are outlined below. Please read the owner’s manual to take full advantage of all the features this unit has to offer.

• BD-ROM Playback BD-ROM is a next generation optical disc format in the HD era. Featuring massive storage capacity of 25 to 50 GB (five times larger than a DVD) and a high-speed transfer rate of up to 54 Mbps, this format offers not only uncompromised HD quality video* audio up to 8ch, and interactive operability. * A compatible HD display device is necessary to enjoy the same quality.

†

Some discs allow viewing only with an HDMI connection.

• 24p True Cinema Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an even pace. When connected to a TV with 24p capabilities, the player displays each frame at 1/24 second intervals — the same interval originally shot with the film camera, thus faithfully reproducing the original cinema image.

• BD-J Application The BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

†

, but also enables rich bonus content on a single disc and HD quality

• BD-Live Some BD-ROM discs labelled, “BD-Live” contain interactive information, trivia games, etc. The player must be connected to the internet as described later in this manual.

• Firmware Update Firmware is software in the player that controls the unit’s microprocessor. The software (firmware) can be downloaded from www.memorex.com and then copied to a CD, DVD or USB device. We recommend updating to the latest firmware to enhance the product’s operation and/or add new features.

• HDMI (High-Definition Multimedia Interface) Digital Interface When connected to an HDMI-equipped display device using a single HDMI cord, the player can output both SD to HD video and multi-channel audio signals, in digital form without degradation. The HDMI specification supports HDCP (High-bandwidth Digital Content Protection), a copy protection technology that incorporates coding technology for digital video signals.

21 76543

FRONT

21 3 4 87 1095 6 11

LOCATION OF CONTROLS

1. Power/Standby Button

2. Disc Compartment

3. Open/Close Button

4. Power Indicator

5. Display

6. Remote Sensor

REAR

7. Skip (

8. Stop (

9. Skip (

) Button

10. Play/Pause (®P) Button

11. USB/SD Card Jack (Inside Compartment)

1. Power Switch

2. AC Power Cord

3. COAXIAL Output Jack

4. OPTICAL Output Jack

5. Stereo Audio Left/Right Output Jacks

6. CVBS (Composite Video) Output Jack

7. Component Video (Y, Pb, Pr) Output Jacks

8. HDMI Jack

9. Ethernet Jack

LOCATION OF CONTROLS (CONTINUED)

14 15 16 17

20 21

18 19

UDIO

LEAR

ENTER

SETUP

DISPLAY

MUTE

GOTO

REPEAT

PROG

DIGEST

ZOOM

A-B

2nd

AUDIO

BOOK MARK

OSC PIP

MEDIA

CENTER

TOP

RANDOM

HDMI

ETURN

POP-MENU

TITLE

123

456

7809

UBTITLE

NGLE

REMOTE

. Open/Close Button

2. SUBTITLE Button

3. AUDIO Button

4. CLEAR Button

5. SETUP Button

6. Navigation (

√,®,†,π

) Buttons

7. ENTER Button

8. DISPLAY Button

9. Play (®) Button

10. Search/Reverse

11. Pause (

12. Stop (

13. Skip

) Button

Button

) Button

√√

Button

14. GOTO Button

15. HDMI Button

16. REPEAT Button

17. Repeat A-B Button

18. PROGRAM/Red Button

19. BOOKMARK/Green Button

20. TOP MENU Button

21. MEDIA CENTER Button

22. Power/Standby Button

23. ANGLE Button

24. Number (0–9) Buttons

25. RETURN Button

26. POP-MENU/TITLE Button

27. MUTE Button

28. Search/Forward

29. Skip

Button

®®

Button

30. Slow Forward Button

31. Slow Reverse Button

32. RANDOM Button

33. 2nd AUDIO Button

34. ZOOM/Blue Button

35. DIGEST/Yellow Button

36. PIP (Picture-In-Picture) Button

37. OSC (On-Screen Control) Button

REMOTE CONTROL PART NO. 0118020235*

BATTERY COVER PART NO. 0118020235BR*

A/V RCA CABLE PART NO. 0117030001*

*Consumer Replaceable Part (See page 49 to order.)

REMOTE CONTROL

About 20 ft.

$$$

BATTERY INSTALLATION

Remove the Battery Compartment cover by pushing in on the tab and then lifting the cover off.

2. Install two (2) “AAA” batteries, paying attention to the polarity diagram in the battery compartment.

3. Replace the Battery Compartment cover.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

2. Use only the size and type of batteries specified.

3. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed battery may cause damage to the device.

4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with fresh ones.

5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)

7. Remove batteries promptly if consumed.

8. Clean the battery contacts and also those of the device prior to battery installation.

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

NOTES:

• When there is an obstacle between the Player and the transmitter, the transmitter may not operate.

• When direct sunlight, an incandescent lamp, ﬂuorescent lamp or any other strong light shines on the REMOTE SENSOR of the Player, the remote operation may be unstable.

CONNECTION

CONNECTING THE PLAYER TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS

NOTES:

• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or Video OUT jack on the player.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any connections.

• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

CONNECTION (CONTINUED)

CONNECTING THE PLAYER TO A TV USING THE Y/Pb/Pr JACKS

NOTES FOR CONNECTING TO A TV:

• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or Video OUT jack on the player.

• TV must have Y, Pb and Pr input jacks.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any connections.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

• If using a TV with a blue screen option, turn the option off, on the TV for best results.

• If the TV display shows "No Signal" or is blank after connecting the Y, Pb and Pr, use the Video Out connection as shown on the previous page.

PROGRESSIVE (Y, Pb, Pr) VIDEO OUTPUT:

Use these jacks to connect to a TV with progressive video input jacks. Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional system, interlaced scan. This connection provides optimum quality. To ensure optimum picture quality, use three video-grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.

CONNECTION (CONTINUED)

CONNECTING THE PLAYER TO A TV USING THE HDMI OUTPUT JACK

NOTES:

• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or Video OUT jack on the player.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any connections.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

When using HDMI as your source, setup the HD resolution in the Video menu as described on page 27 and the Digital Output in

•

the Audio menu as described on page 29. You can also press the HDMI button on the remote control to set the desired resolution.

• When you connect the HDMI cable to a TV for the first time, the HDMI output resolution will be automatically set to the highest provided by the TV.

• If connecting to a Receiver and TV that have an HDMI jack, please see the next page.

• Depending on your TV, some HDMI resolutions may not work.

CONNECTION (CONTINUED)

HDMIINHDMI

OUT

Receiver

CONNECTING THE PLAYER TO A TV AND RECEIVER USING THE HDMI OUTPUT JACK

NOTES:

• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component or Video OUT jack on the player.

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV and receiver, as well as this manual.

• When connecting the Player to the TV and receiver, make sure the power is off and both units are unplugged before making any connections.

When using HDMI as your source, setup the HD resolution in the Video menu as described on page 21 and the Digital Output in

•

the Audio menu as described on page 29. You can also press the HDMI button on the remote control to set the desired resolution.

• Depending on your TV, some HDMI resolutions may not work.

CONNECTION (CONTINUED)

CONNECTING THE PLAYER TO A TV USING A DVI CABLE

NOTES:

• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.

• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.

• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any connections.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

When using HDMI as your source, setup the HD resolution in the Video menu as described on page 21. You can also press the

•

HDMI button on the remote control to set the desired resolution.

• When you connect the HDMI cable to a TV for the first time, the HDMI output resolution will be automatically set to the highest provided by the TV.

• Depending on your TV, some HDMI resolutions may not work.

CONNECTION (CONTINUED)

CONNECTING THE PLAYER TO A HOME THEATER SYSTEM (VIA COAXIAL OR OPTICAL JACK)

NOTES:

• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.

• When connecting, make sure the power is off and all units are unplugged before making any connections.

• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted because video discs are copy protected.

• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away from the tuner.

• When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the two front channels.

CONNECTION (CONTINUED)

CONNECTING THE PLAYER TO A NETWORK

CONNECTING TO A LAN (To utilize BD-Live)

By connecting this unit to a broadband connection, this unit can support the BD-Live feature offered on some movie titles. BD-Live offers additional interactive media and games that are associated with the movie title.

1. Connect the LAN (100) terminal of the player to your internet source from the broadband router directly. Refer to the instructions that came with the router.

2. Make the appropriate setting; see Network Setting section on page 25.

NOTES:

• For details on the network (LAN), refer to the operating instructions supplied with the modem or router.

• See page 16 for FAQs and information on BD-Live.

+ 36 hidden pages