Memorex MT2327 User Manual

OWNER’S MANUAL MANUEL D’INSTRUCTIONS

32” MTS STEREO COLOR TELEVISION TÉLÉVISEUR 32” COULEUR STÉRÉO AVEC RÉCEPTION AUDIO SUR CANAUX MULTIPLES

MT2327

ENGLISH

FRANÇAIS

When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV, set this menu option to "TV" mode. Lors de la fabrication de l'appareil, l'option menu TV/CATV est réglée au mode "CATV" (câblodistribution). Si l'on n'utilise pas le mode CATV (câblodistribution), réglez cette option menu au mode "TV".

Before operating the unit, please read this manual thoroughly. Avant de mettre cet appareil en marche, veuillez lire attentivement ce manuel.

3M00201A-E 8/2/02, 2:13 PM1

TV/CATV MODE SELECTION

SÉLECTION DU MODE TV/CATV

ENGLISH

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC

Rules could void the user's authority to operate this equipment.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE: Please keep all packaging material for at least 90 days in case you need to return this product to your place of

purchase or Memorex.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation, such as a bookcase, or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the groundingtype plug.

12. POWERCORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

3M00201A-E 8/2/02, 2:13 PM2

13. LIGHTNING

To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered

by the operating instructions, as an improper adjustment of other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance, this indicates a need for service.

20. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

23. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

ENGLISH

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

NEC-NATIONAL ELECTRICAL CODE S2898A

3M00201A-E 8/2/02, 2:13 PM3

GROUNDING CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-21)

GROUNDING CONDUCTOR (NEC SECTION 810-21)

GROUNDING CLAMPS POWER SERVICE GROUNDING

ELECTRODE SYSTEM (NEC ART 250, PART H)

FEATURES

• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available

in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system.

• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.

• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.

• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the TV should

occur.

• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.

• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.

• Stereo/SAP Reception - This TV is designed to receive stereo and separate audio program (SAP) broadcasts where available.

• Universal Remote Control - You can operate your VCR and Cable/Satellite Box after you have programmed the remote control

with the code that operates your products.

LOCATION OF CONTROLS

FRONT

– SET +

▼ CHANNEL ▲

POWER

▼ VOLUME ▲

ENTER

RESET

(MONO)

VIDEO IN

L – AUDIO IN – R

12 3 4 5

1. POWER Button - Press to turn the TV on or off.

2. Remote Sensor - Signals from the Remote Control unit

are received here.

3. CHANNEL ▼ / ▲ Buttons - Press to select a higher or

lower numbered channel set into memory. (ENTER Button) - Press to enter or select information for On-Screen operations. (RESET Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture adjustments to their factory preset positions.

4. VOLUME ▼ / ▲ Buttons - Press to raise or lower the

level of the sound. (MENU Buttons) - Press both buttons to display the OnScreen menu functions. (SET + / – Buttons) - Press to select the desired setting during On-Screen operations.

BACK

IN OUT

VIDEOVIDEO

L/MONO

ANT(75 )

L/MONO

S-VIDEO

AUDIO

678

5. AUDIO (L / R) / VIDEO IN Jacks (AUX 2)-Audio and video

signal cables from an external source can be connected here.

6. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF antenna or CATV cable to this jack.

7. S-VIDEO IN Jack - S-Video signal cable from an external source can be connected here.

8. REAR AUDIO (L/R) VIDEO IN Jacks (AUX 1) - Audio and video signal cable from an external source can be connected here.

9. REAR AUDIO (L/R) VIDEO OUT Jacks - Used to output audio and video signals to a TV, amplifier or VCR.

10. AC Power Cord - Plug into an outlet having 120V, 60 Hz AC power only.

3M00201A-E 8/2/02, 2:13 PM4

REMOTE CONTROL

POWER

TV VCR CABLE

123

456

789 0

CODE SET

CH ENTER

9 10

11 12

ENGLISH

VOL

3 4

5 6

7 8

SLEEP AUDIO SELECT

REW F.FWDPLAY

* You can use these buttons to operate your

VCR or Cable/Satellite box after you have

TV/VCR

programmed the remote control for the code that operates your VCR or Cable/Satellite box

REC VCR CH

(see page 7).

1. TV, VCR, CABLE POWER Button* - Used to turn the TV, VCR or Cable/Satellite box on or off after you select the operating mode on step 9.

2. Direct Channel Selection Buttons (0-9)* - Allows direct access to any channel of the TV, VCR or Cable/ Satellite box.

3. CH (CHANNEL) ▲ / ▼ Buttons* - Used to change the channels of the TV or Cable/Satellite box.

4. MENU Button - Press to display the On-Screen menu function.

5. RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions.

6. CH.1/2 Button - Switches between Channel 1 and Channel 2 in the Closed Caption mode.

7. TV/CAP/TEXT Button - Press this button to switch between normal TV and the two Closed Caption modes (captions and 1/2 of full screen text). Closed Captioning will display text on screen for hearing impaired viewers.

8. SLEEP Button - To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, ······ 20, 10,

0. After the sleep time is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the sleep timer function is operating. To confirm the sleep time setting, press the SLEEP button once and the remaining time will be momentarily displayed. To cancel sleep time, press the SLEEP button repeatedly until the display turns to 0.

9. TV, VCR, CABLE Selector Buttons - Press to select the TV, VCR or Cable/Satellite box to be operated.

VOL

MUTING

SET ENTERMENU

RECALLRESET

14 15

16 17

TV/AV QUICK VIEWCH.1/2TV/CAP/TEXT

18 19

PAUSE/STILL

STOP

10. CODE SET Button - Used to register the 2-digit codes to

operate your VCR or Cable/Satellite box. Press this button and the VCR button or the CABLE button simultaneously to start a registration (See instructions page 7).

11. CH ENTER Button* - Press to input the selected channel of the VCR or Cable/Satellite box, in case your unit requires CH ENTER button.

12. VOL (VOLUME) / Buttons - Press the button to increase, or the / button to decrease the volume level.

13. MUTING Button - To turn off the sound, press this button once. The TV will be silenced and the symbol "MUTING" will appear on the screen. The muting feature can be released by pressing the MUTING button again or one of the VOL or / button.

14. SET + / – Buttons - Press to select the desired setting during On-Screen operations.

15. ENTER Button - Press to enter or select information for On-Screen operations.

16. RECALL Button - When you press this button, the channel number will appear on the upper right corner of the screen. Press the button again to remove display from the screen.

17. TV/AV Button - Switches between TV and external inputs.

18. QUICK VIEW Button - This button allows you to go back to

the previous channel selected by just pressing the QUICK VIEW button. Press this button again to return to the channel you were watching.

19. AUDIO SELECT Button - Switches sound between mono, stereo, and SAP when receiving broadcasts in stereo or SAP.

20. VCR Operation Buttons* - Press to operate your VCR.

3M00201A-E 8/2/02, 2:13 PM5

REMOTE CONTROL (CONTINUED)

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AAA" batteries (not supplied).

3. Replace the battery compartment cover.

HOW TO USE THE REMOTE CONTROL

You can use the remote control to operate your VCR and Cable/ Satellite box as well as the TV after the batteries are installed and you have registered the codes that operate your products. Some buttons are used exclusively for each product and some buttons are used in common with each product. To operate your products correctly using this universal remote control follow each step below.

Use two "AAA" size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer's directions.)

A. For TV

1 Press the TV button first. 2 Aim remote at TV. 3 Press the POWER button. 4 Press other buttons to operate the features of your TV.

You can use the CH ▲ and ▼ buttons, the 0-9 buttons.

A, B, C

POWER

TV VCR CABLE

MUTING

SET ENTERMENU

STOP

CODE SET

CH ENTER

RECALLRESET

TV/AV QUICK VIEWCH.1/2TV/CAP/TEXT

PAUSE/STILL

123

456

789 0

SLEEP AUDIO SELECT

REW F.FWDPLAY

TV/VCR

REC VCR CH

B, C

VOLVOL

B. For VCR

1 Press the VCR button first. 2 Aim remote at VCR.

3 Press the POWER button to turn on VCR 4 Press other buttons to operate the features of your VCR.

You can use the VCR CH ▲ and ▼ buttons, the 0-9 buttons, the CH ENTER button.

C. For CABLE/SATELLITE box

1 Press the CABLE button first. 2 Aim remote at CABLE/SATELLITE box.

3 Press the POWER button to turn on your CABLE/

SATELLITE box.

4 Press other buttons to operate the features of your

CABLE/SATELLITE box. You can use the CH ▲ and ▼ buttons, the 0-9 buttons, the CH ENTER button.

NOTES:

• While operating the TV, if the CH ▲ and ▼ buttons do not respond, press the “TV” button to reactivate TV mode.

• Some buttons that have same functions are called different names according to the brand and model of the product. For example, CALL may be called "DISPLAY".

• The buttons A, B and C are used exclusively for each product. You can use these buttons whenever you want.

3M00201A-E 8/2/02, 2:13 PM6

REMOTE CONTROL (CONTINUED)

TO REGISTER YOUR VCR OR CABLE BOX WITH THE REMOTE CONTROL

1 Press the CODE SET button and the VCR or the CABLE button you want to register at the same time. 2 Enter the 2-digit code listed below using the Direct Channel Selection buttons (0-9) within 10 seconds.

NOTES:

• When shipped from the factory, the remote control is set to operate your TV.

• If you do not enter the code within 10 seconds from step 1 or enter the non-listed code below, this operation is canceled.

• When you install or replace batteries, you may need to register the codes again for the products you want to control.

REGISTRA TION CODES BY PRODUCT AND BRAND NAME

VCR

Admiral 08,81 Multi Tech 39 Adventura 31 NEC 02,18 Aiwa 23, 38, 41 Orion 33, 50 Akai 23, 38, 41 Panasonic 14, 51, 59 Audio Dynamics 02, 18 Pentax 15 Bell & Howell 06, 47 Philco 07, 14 Broksonic 21, 26, 33, 50, 55 Philips 07, 14, 27 Canon 14 Pioneer 10, 15 Citizen 09 Portland 46 Craig 12 Pro Scan 16, 60 Curtis Mathes 14, 59 Quasar 14, 59 Daewoo 44, 46, 48, 54 RCA 15, 16, 20, 27, 40, 42, 60 Daytron 36, 46 Realistic 06, 08, 12, 14, 31 DBX 02, 18 Samsung 20, 30 Emerson 03, 21, 23, 26, 33, 35, 43, 50 Sansui 39 Fisher 11, 12, 13, 47 Sanyo 06, 12, 47 Funai 31 Scott 04, 05, 33, 43 General Electric 14, 16, 20 Sears 06, 09, 11, 12, 15 Goldstar 09 Sharp 08, 61 Go Video 55, 62, 63 Shintom 39 Hitachi 15, 57 Signature 2000 08, 14, 16, 19, 31, 49 Instant Replay 14, 27 Sony 17, 32, 37 J. C. Penney 14, 15, 18, 27 Sylvania 07, 14, 27 JVC 02, 25, 58 Symphonic 31 Kenwood 02 Tashiko 09 Logik 39 Tatung 02 LXI 09, 31 Teac 02, 31 Magnavox 07, 14, 31 Teknika 34 Marantz 07, 18 Toshiba 05, 15 Marta 09 XR1000 39 Memorex 06, 12, 14, 31, 33 Vector Research 04, 18 Mitsubishi 04, 22, 52, 64 Yamaha 02, 18 Montogomery Ward 08, 14, 16, 19, 31, 49 Zenith 01, 24, 25, 29, 37

ENGLISH

CABLE/SATELLITE

Allegro 58, 62 RCA DSS 73 Allegro A/B Switch 61 Regency 29 Gemini 05, 31, 38 Samsung 35 General Electric 67 Scientic Atlanta 16, 23, 36, 64 General Instrument 05, 06 Sprucer 13 Hamlin 02, 03, 45, 65, 66 Standard Comp 35 Jerrold 04, 07, 08, 09, 10,18, 60, 63 Texscan 39, 56, 71 Kale Vision 35 Tocom 17, 18, 46 Macom 14, 21 Unika 48, 62 Magnavox 34 United Satellite 44 NSC 35, 39, 68, 69, 70 Universal 58, 62 Oak 11, 32, 42 Vid Tech 40 Panasonic 13, 20 Video Way 49 Philips 47, 50, 52, 54, 55 Zenith 01, 53, 74 Pioneer 15, 43 Zenith Satellite 12, 28, 30, 51

3M00201A-E 8/2/02, 2:13 PM7

ANTENNA/CATV CONNECTIONS

To AV OUT Jack

(Not Supplied)

Front of TV

VIDEO IN

(MONO)

L – AUDIO IN – R

Combination VHF/UHF Antenna

Single 75 ohm Cable

300 ohm Twin-Lead Wire

Splitter

UHF Antenna

300ohm Twin-lead Wire

VHF Antenna

Single 75 ohm Cable

300 ohm Twin-lead Wire

Incoming CATV

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

Connect the 75 ohm cable from a combination VHF/UHF antenna to the Antenna Jack. If your combination antenna has a 300 ohm Twin-lead Wire, use the 300-75 ohm Matching Transformer (not supplied).

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-leads)

Connect the UHF Twin-lead Wire to a Combiner (not supplied). Connect the VHF Twin-lead to the 300-75 ohm Matching Transformer (not supplied). Attach the Transformer to the Combiner. Attach the Combiner to the Antenna Jack.

Take off the Splitter

Converter/Descrambler

A/B SwitchSplitter

300-75 ohm Matching Transformer (not supplied)

Combiner (not supplied)

This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal

IN OUT

VIDEOVIDEO

L/MONO

ANT(75 )

L/MONO

S-VIDEO

AUDIO

Separate VHF/UHF Antennas

Connect the 75 ohm Cable from the VHF antenna and the UHF antenna Twin-lead to a combiner (not supplied). Attach the Combiner to the Antenna Jack. NOTE: If your VHF antenna has a Twin-lead Wire, use the 300-75 ohm Matching Transformer (not supplied), then connect the Transformer to the Combiner.

viewing requires the use of a descrambler device which is generally provided by the cable company.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the incoming cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown left. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a two-set signal splitter (sometimes called a "two-set coupler") and an A/B Switch box from the cable installer or an electronics supply store. Follow the connections shown left. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the "A" position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels.

AUDIO/VIDEO JACK CONNECTIONS

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

Press the TV/AV selector button to select the AV mode to use the TV as a monitor. Operate your VCR as usual.

TV/AV selection

If you connect the TV to a VCR, camcorder, or TV game, through the audio/video in jacks, use the TV/AV button to make your selection. Press the TV/AV button repeatedly to select the desired mode. "AUX1" or "AUX2" will display on the screen for 4 seconds.

TV AUX1 AUX2

1. To connect the TV to a VCR

To Audio/Video

OUT

3M00201A-E 8/2/02, 2:13 PM8

VCR

(not supplied)

IN OUT

L/MONO

S-VIDEO

AUDIO

VIDEO

TV Rear Panel

ANT(75 )

AUDIO (L) AUDIO (R)

VIDEOVIDEO

L/MONO

AUDIO

AUX 1

2. To connect the TV to a TV game

The TV can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.

To Audio/Video OUT

TV GAME

(Not supplied)

3. To connect the TV to the camcorder

To playback from the camcorder, connect the camcorder to the TV as shown.

Front of TV

(MONO)

VIDEO IN

L – AUDIO IN – R

AUDIO/VIDEO JACK CONNECTIONS (CONTINUED)

4. To connect the TV to a VCR with an S-VIDEO jack

If you connect a VCR with an S-video jack to the S-VIDEO jack on the rear of the TV, you must also connect the audio cables to the AUDIO IN jacks on the rear of the TV. The S-video cable only carries the video signal; the audio signal is separate.

VCR

(not supplied)

TV Rear Panel

ANT(75 )

S-VIDEO

IN OUT

L/MONO

AUDIO

VIDEOVIDEO

L/MONO

AUDIO

Press the TV/AV button to select AUX1 to use the AV as a monitor for a video device connected to the S-Video jack.

NOTE: When the S-video cable and the standard video cable

are connected at the same time, the S-video cable

(not supplied)

AUDIO (R)

AUDIO (L)

takes precedence.

SETTING LANGUAGE

This TV can display the on-screen language in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

1 Press the MENU BUTTON.

2 Press the SET + or – button

to select the LANGUAGE mode, then press the ENTER button.

CH SET PICTURE AUDIO LANGUAGE

/Ð/ ENTER / MENU

3 Press the SET + or – button to

select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.

4 Press the MENU button until the

LANGUAGE / IDIOMA / LANGUE

ENGLISH ESPAOL FRANCAIS

/Ð/ ENTER / MENU

menu screen is cleared.

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selection.

TV OPERATION

ENGLISH

1 To turn on the TV, press the POWER button. 2 The VOLUME can be adjusted to a desired level by

pressing the VOL (VOLUME) or / button.

The sound level will be indicated on the TV screen by green bars and a number. As the sound level increases, so do the number of bars and the number on the screen. The same is true for decreasing the level.

3 Set the TV/CATV menu option to the appropriate

position. When shipped from the factory, this menu option is in the CATV setting. See "TO MEMORIZE CHANNELS".

TV - VHF/UHF channels CATV - CABLE TV channels

4 CH (CHANNEL) ▲ and ▼ buttons

Press and release the CH (CHANNEL) ▲ or ▼ button. The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly.

For proper operation, before selecting channels, they should be set into the TV's memory. See "TO MEMORIZE CHANNELS".

Direct Channel Selection buttons (0-9)

Press these buttons to select a channel. The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the original channel.

TV Mode Direct Channel Selection

When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons. (For example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.

CATV Mode Direct Channel Selection

When the TV/CATV menu option is in the CATV position, channels can be selected as follows:

CH. 1-9 Press "0" twice, then 1-9 as needed.

Example, to select channel 2, press "002".

CH. 10-12 Press "0", then remaining 2 digits.

Example, to select channel 12, press "012".

CH. 13-99 Press the 2 digits in order. Example, to

select channel 36, press "36".

CH. 100-125 Press the 3 digits in order. Example, to

select channel 120, press "120".

NOTE: If the station being viewed stops broadcasting, the

TV will automatically shut off after 15 minutes.

3M00201A-E 8/2/02, 2:13 PM9

+ 19 hidden pages