Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.
ATTENTION
If you purchase a universal remote control from your local retailer, please contact
the remote manufacturer for the required programming code.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the "CATV"
(Cable Television) mode. If not using CATV, set this menu option to "TV " mode.
FEATURES
Quartz PLL Frequency Synthesized Tuning System - Electronically locks in and
memorizes available channels for perfect reception.
181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF
standard broadcast channels that are available in your area. When operating on a cable
system, it can tune to the standard VHF channel frequencies plus up to 113 cable
MC
channel frequencies. The actual number of channels received depends upon channel
reception in your area or your cable system.
On-Screen 3 Language Display - This TV can display the on screen language in
English, Spanish or French.
Picture Adjustments Using The Remote Control - The On-Screen display allows
precise remote control adjustment of BRIGHTNESS, COLOR, CONTRAST,
SHARPNESS and TINT.
Sleep Timer - Operable from the remote control, this TV can be programmed up to 120
minutes to turn off automatically.
Memory Back Up - This system prevents loss of memorized channel selections in case
a power interruption to the TV should occur.
Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the
screen for hearing impaired viewers.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the
program is encoded with this information. The V-Chip will allow you to set a restriction level.
Connect the 75 ohm cable from a combination VHF/UHF
antenna to the antenna jack.
If your combination antenna has a 300 ohm twin-lead wire,
use the 300-75 ohm matching transformer (not supplied).
Combination VHF/UHF Antenna (Separate VHF
and UHF 300 ohm twin-lead)
Connect the UHF twin-lead wire to a combiner (not
supplied). Connect the VHF twin-lead to the 300-75 ohm
matching transformer (not supplied). Attach the
transformer to the combiner. Attach the combiner to the
antenna jack.
Separate VHF/UHF Antenna
Connect the 75 ohm cable from the VHF antenna and the
UHF antenna twin-lead to a combiner (not supplied).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-lead wire, use the
300-75 ohm matching transformer (not supplied), then
connect the transformer to the combiner.
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a converter/
descrambler box, connect the CATV 75 ohm coaxial cable
directly to the antenna jack on the back of the television.
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use
of a converter/descrambler box, connect the incoming
cable to the converter/descrambler box and connect the
ANT
output of the box to the antenna jack on the back of the
television. Follow the connections shown left. Set the
television to the output of the converter/descrambler box
(usually channel 3 or 4) and use the converter/descrambler
box to select channels.
Converter/Descrambler
Converter/Descrambler
Converter/Descrambler
Converter/Descrambler
Splitter
Splitter
3R00601A E4/1/04, 8:56 PM2
A/B Switch
A/B Switch
For Subscribers to Unscrambled Basic Cable
with Scrambled Premium Channels
This television has an extended tuning range and
can tune most cable channels without using a cable
company supplied converter box. Some cable
companies offer "premium pay channels" in which
A
B
the signal is scrambled. Descrambling these signals
for normal viewing requires the use of a descrambler
device which is generally provided by the cable
company.
If you subscribe to a cable service in which basic cable
channels are unscrambled and premium channels require
the use of a converter/descrambler box, you may wish to
use a two-set signal splitter (sometimes called a "two-set
coupler") and an A/B switch box from the cable installer or
an electronics supply store. Follow the connections shown
left. With the switch in the "B" position, you can directly tune
any nonscrambled channels on your TV. With the switch in
the "A" position, tune your TV to the output of the converter/
descrambler box (usually channel 3 or 4) and use the box
to tune scrambled channels.
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal
VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu
option is in the CATV setting.
TV/CATV SELECTION
Press the MENU button.
1
2
Press the SET + or – button until the indicator next to "CH SETUP"
begins to flash, then press the ENTER button.
3
Press the SET + or – button until the indicator next to "TV/CATV"
begins to flash.
4
Press the ENTER button to select the TV or CATV mode. The arrow
indicates the selected mode.
Press the MENU button twice to return to normal TV viewing.
5
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
+
á
/ – / ENTER / MENU
CATV
TV
AUTO CH MEMORY
ADD / DELETE
+
〈
/ – / ENTER / MENU
ñ
〉
The chart below is typical of many cable system channel allocations.
CATV CHART
Number on this TV
Corresponding CATV channel
23J24K25L26M27N28O29P30Q31
41EE42FF43GG44HH45II46JJ47KK48LL49
59WW60
AAA61BBB62CCC63DDD64EEE65FFF66GGG67HHH
77
RRR78SSS79TTT80UUU81VVV82WWW83XXX84YYY85ZZZ
95
A-596A-497A-398A-299A-1
113
114
115
113
114
NOTE:
Contact your cable company to determine the type of cable system used in your area.
115
116
116
117
117
100
100
118
118
101
101
119
119
102
102
120
120
MM
103
103
121
121
R
AUTOMATIC CHANNEL MEMORY
Press the MENU button.
1
Press the SET + or – button until the indicator next to "CH SETUP"
2
begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "AUTO CH
3
MEMORY" begins to flash, then press the ENTER button. The TV will
begin memorizing all the channels available in your area. Channel
numbers will remain red until auto memorizing is complete.
Press the MENU button twice to return to normal TV viewing.
4
14A15B16C17D18E19F20G21H22
32S33T34U35V36W37AA38BB39CC40
50NN51OO52PP53QQ54RR55SS56TT57UU58
68
III69JJJ70KKK71LLL
8686878788888989909091919292939394
104
105
106
104
122
122
105
123
123
106
124
124
107
107
125
125015A
73
72
NNN74OOO75PPP76QQQ
MMM
108
109
108
110
109
110
MENU
+
á
/ – / ENTER / MENU
+
〈
/ – / ENTER / MENU
111
111
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
TV
CATV
AUTO CH MEMORY
ADD / DELETE
DD
VV
94
112
112
ñ
〉
I
TO ADD/DELETE CHANNELS
Press the MENU button.
1
Press the SET + or – button until the indicator next to "CH SETUP"
2
begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "ADD/
3
DELETE" begins to flash, then press the ENTER button.
Select the desired channels to be added or deleted using the Direct
4
Channel Selection buttons (10 keys. 0-9), the CH or button
or the SET + or – button.
5
Press the ENTER button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the channel
indicator will be red. Press the ENTER button if you wish to ADD the
unmemorized channel. The channel indicator will change from red to
green when a channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the channel indicator
will be green.
Press the ENTER button if you wish to DELETE the channel from
memory. The channel indicator will change from green to red when a
channel is deleted.
Repeat steps 4 and 5 for each channel to be added or deleted.
Press the MENU button three times after adding or deleting all of the
6
desired channels, to return to normal TV viewing.
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
+
á
/ – / ENTER / MENU
+
〈
/ – / ENTER / MENU
á
ñ
CATV
TV
AUTO CH MEMORY
ADD / DELETE
〉
ñ
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
Press the MENU button.
1
Press the SET + or – button until the indicator next to "PICTURE" begins to
2
flash, then press the ENTER button.
Press the ENTER button repeatedly to select the item you want to adjust.
3
CONTRASTCOLORBRIGHTNESSTINTSHARPNESS
Press the SET + or – button to adjust the setting.
4
+
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode appears on-screen.
increase brightness
increase contrast
be brilliant color
be greenish color
makes picture
clearer
decrease brightness
decrease contrast
be pale color
be reddish color
makes picture softer
–
CONNECTION TO OTHER EQUIPMENT
The exact arrangement you use to interconnect various video and audio components to the TV is
dependent on the model and features of each component. Check the Owner's Manual provided with
each component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to
accommodate your particular assortment of components. The diagrams are intended to show
component video and audio interconnections only.
TV/AV SELECTION
If you connect the TV to a VCR, camcorder or TV
game, through the audio/video in jacks, use the TV/
AV button to make your selection.
Press the TV/AV button repeatedly to select the
desired mode.
"AUX" will display on the screen for 4 seconds.
AUX
1. To connect the TV to a VCR
VCR
To Audio/
Video OUT
Front of TV
VIDEO
AUDIO
2. To connect the TV to a TV Game
The TV can also be used as a display device for
many video games. However, due to the wide
variety of different types of signal generated by
these devices and subsequent hook-up variations
required, they have not all been included in the
suggested connection diagrams. You'll need to
consult each component's Owner's Manual for
additional information.
To Audio/Video OUT
TV GAME
Front of TV
(not supplied)
3. To connect the TV to a camcorder
To playback from the camcorder, connect the
camcorder to the TV as shown.
To AV OUT
jack
Front of TV
(not supplied)
TROUBLESHOOTING GUIDE
(not supplied)
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
TV does not operate.
Poor sound or No sound.
Poor picture or No picture.
Poor reception on some
channels.
Poor color or no color.
Picture wobbles or drifts.
No CATV reception.
Horizontal or diagonal bars
on screen.
No reception above
channel 13.
No Remote operation.
TV shuts off.
Closed - Caption is not
activated.
Display is not shown in
your language.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (VOLUME and MUTE).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
• Check antenna connections, adjust or re-direct antenna.
• Check for sources of possible interference.
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
•
TV station experiencing problems or program tuned is not closed captioned.
Try another channel.
•
Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the closed caption decoder.
• Select proper language in the menu options.
POSSIBLE SOLUTIONS
DEGAUSSING SYSTEM
This television has a degaussing circuit that will clear up color distortions on the TV screen
that are caused by any excess magnetism which happens to get too close to the TV. This
circuit is designed to operate once when the set is first plugged in. If minor color distortions
are seen in some locations on the screen, please unplug the TV for approximately 15
minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear
up any color distortions. Repeat this procedure any time the TV screen is accidentally
magnetized, or when the TV is moved or relocated.
SPECIFICATIONS
Model
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:
Antenna Input Impedance:
Input:
Dimensions:
Weight:
ACCESSORIES
Remote Control
Telescopic Antenna (MT1134 only)
120V, 60Hz
MT1134
54 Watts
IC Solid state
13" (measured diagonally)
260 lines
1.0 Watts
3" Full Range, 8 ohm
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (not supplied)
VHF2-13
El usuario corre el riesgo de perder la autorización para hacer funcionar este equipo en
caso de que ejecute un cambio o modificación no aprobado por la parte responsable
para la conformidad con las Reglas FCC.
ATTENCION
Si usted a comprado un control de remoto universal, por favor comunicace con el
fabricante para el codico de programaccion requerido.
SELECCION DE MODO DE TV/CATV
Al salir la unidad de fábrica, la opción de menú de TV/CATV se ajusta al modo de
"CATV" (Televisión por cable).
Si no utiliza CATV, ajuste esta opción de menú al modo de "TV".
CARACTERISTICAS
Sistema de sintonización sintetizada de frecuencias PLL a cuarzo - El sintonizador
de cuarzo capta y memoriza electrónicamente los canales para una perfecta recepción.
181 canales de TV cable - El sistema de sintonización es capaz de recibir los 68 canales
de VHF/UHF de emisión estándar disponibles en su área. Al ser usado con un sistema
de TV cable, este sistema puede sintonizar las frecuencias de VHF estándar y 113
frecuencias de TV cable. El número real de canales recibidos dependerá de la recepción
de canales en su área y del servicio de TV cable al que usted esté suscrito.
Indicaciones en la pantalla en 3 idiomas - Indica el canal, temporizador para dormir,
nivel de volumen, silenciamiento, indicadores de texto/capciones y ajustes de control de
imagen. Pueden aparecer en inglés, español o francés.
Ajustes de imagen usando la unidad de control remoto - La indicación en pantalla
permite realizar precisos ajustes de BRILLO, COLOR, CONTRASTE, NITIDEZ y TINTE
desde la unidad de control remoto.
Temporizador de desactivación automática - Controlando esta función desde la unidad
de control remoto, usted podrá programar el televisor para que se apague
automáticamente después de un período de hasta 120 minutos.
Protección de la memoria - En caso de interrupciones en el suministro de energía al
televisor, este sistema evita la pérdida de los canales memorizados.
Descodificador de subtítulos - Exhibe subtítulos de texto en una tercera parte de
pantalla completa de TV para personas con problemas de audición.
Chip V - La función de prohibición para menores con Chip V puede leer la clasificación de un
programa de TV o película, si el programa tiene codificada esta información. El Chip V permite
seleccionar el nivel de prohibición.
MT1134
MT1194
CONEXIONES DE ANTENA
Antena combinada de VHF/UHF
Cable solo de 75 ohmios
300 ohmios de conductores gemelos
Divisor
Desmonte el divisor
Antenas de UHF
300 ohmios de conductores gemelos
Antenas de VHF
Cable solo de 75 ohmios
Transformador de adaptación
de 300-75 ohmios (no
suministrado)
Antena combinada de VHF/UHF (Cable solo de 75
ohmios o de conductores gemelos de 300 ohmios)
Conecte el cable de 75 ohmios desde antena combinada de
VHF/UHF al soporte de antena.
Si su antena combinada es un cable de 300 ohmios de
conductores gemelos, use un transformador de adaptación
de 300-75 ohmios (no suministrado).
Antena combinada de VHF/UHF (VHF separada y UHF
300 ohmios de conductores gemelos)
Conecte el cable de conductores gemelos de UHF al
combinador (no suministrado). Conecte el cable de
conductores gemelos de VHF al transformador de
adaptación de 300-75 ohmios (no suministrado). Fije el
combinador al soporte de antena.
Antenas de VHF/UHF separadas
Conecte el cable de 75 ohmios desde antena de VHF y
UHF de conductores gemelos al combinador (no
suministrado). Fije el combiandor al soporte de antena.
NOTA: Si su antena de VHF tiene un cable de conductores
gemelos, use un transformador de adaptación de 300-75
ohmios (no suministrado), luego conecte el transformador al
combinador.
PARA LOS ASOCIADOS A UN SERVICIO DE TV POR
CABLE BASICO
Para un servicio de cable básico que no requiera
convertidor/descodificador, conecte el cable coaxial CATV
75 ohmios directamente a la entrada de antena en la parte
trasera del televisor.
300 ohmios de conductores gemelos
Cable entrante de CATV
Converter/Descrambler
Convertidor/Decodificador
Converter/Descrambler
Convertidor/Decodificador
Splitter
Divisor
3R00601A S4/1/04, 8:57 PM2
Conmutador
A/B Switch
A/B
Combinador
(no suministrado)
Transformador de adaptación de
300-75 ohmios (no suministrado)
Este televisor, puede sintonizar la mayoría de los
canales por cable sin necesidad de recurrir al
convertidor suministrado por los canales de cable.
Algunas compañías de cable ofrecen "canales
A
B
pagados premiados" en los cuales la señal esta
codificada. La decodificación de esas señales para
la obtención de una señal normal, requiere el uso
de un decodificador que es generalmente provisto
por la compañía de cable.
PARA LOS ASOCIADOS A UN SERVICIO DE TV POR
CABLE "CODIFICADO"
Si Ud. está asociado a un servicio de cable que requiere el
uso de un convertidor/descodificador conecte el cable de
ANT
bajada de antena al convertidor/descodificador y conecte la
salida de ésta a la entrada de antena en la parte trasera del
televisor. Siga el conexionado como se muestra en la
figura. Sintonice el televisor en el canal de salida del
convertidor/descodificador (usualmente canal 3 ó 4) y utilice
el convertidor/descodificador para la selección de canales.
PARA ASOCIADOS A UN SERVICIO DE CABLE BASICO
CON CANALES ESPECIALES CODIFICADOS
Si Ud. está asociado a un servicio de cable en el cual los
canales básicos son comunes y los canales especiales
necesitan un convertidor/descodificador, puede utilizar un
divisor de señal (a veces llamada "acoplador") y una caja
de interruptor de cambio A/B. Siga el conexionado como se
muestra en la figura. Con la interruptor en la posición "B",
Ud. puede sintonizar directamente cualquier canal común
en su televisor. Con la interruptor en la posición "A", puede
seleccionar los canales codificados desde el convertidor/
decodificador sintonizando el televisor en el canal de salida
del convertidor/decodificador (canal 3 ó 4).
PARA MEMORIZAR CANALES
Este televisor está equipado con una función de memorización de canales que permite avanzar o
retroceder al siguiente canal almacenado en la memoria, pasando por alto los canales no deseados.
Antes de seleccionar canales, éstos deberán ser programados en la memoria del televisor. Además de
los canales normales de VHF y UHF, este televisor puede recibir hasta 113 canales de TV cable. Para
usar el televisor con una antena, coloque el modo de TV/CATV a la posición TV. Este modo viene
ajustado de fábrica a la posición CATV.
SELECCION DE TV/CATV
Presione el botón MENU.
1
Presione el botón SET + ó – hasta que el indicador "CH SETUP" empiece
2
a parpadear seguidamente, y a continuación presione el botón ENTER.
Presione el botón SET + ó – hasta que el indicador "TV/CATV" empiece
3
a parpadear seguidamente.
4
Presione el botón ENTER para seleccionar el modo TV o CATV. La
flecha indica el modo seleccionado.
Presione el botón MENU dos veces para volver a la imagen normal
5
de TV.
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
+
á
/ – / ENTER / MENU
TV
CATV
AUTO CH MEMORY
ADD / DELETE
+
〈
/
– / ENTER / MENU
ñ
〉
El cuadro abajo muestra el sistema típico de la localización de los canales por cable.
CANALES CATV
Números en este TV
Canal de CATV correspondientes
23J24K25L26M27N28O29P30Q31
41EE42FF43GG44HH45II46JJ47KK48LL49
59WW60
AAA61BBB62CCC63DDD64EEE65FFF66GGG67HHH
77
RRR78SSS79TTT80UUU81VVV82WWW83XXX84YYY85ZZZ
95
A-596A-497A-398A-299A-1
113
114
115
113
NOTA:
Póngase en contacto con la compañía de cable para determinar el tipo de sistema de cable usado en su área.
114
115
116
116
117
117
100
100
118
118
101
101
119
119
102
102
120
120
MM
103
103
121
121
R
14A15B16C17D18E19F20G21H22
32S33T34U35V36W37AA38BB39CC40
50NN51OO52PP53QQ54RR55SS56TT57UU58
68
III69JJJ70KKK71LLL
8686878788888989909091919292939394
104
105
106
104
122
122
105
123
123
106
124
124
107
107
125
125015A
73
72
NNN74OOO75PPP76QQQ
MMM
108
109
109
110
110
108
111
111
DD
VV
94
112
112
I
MEMORIA AUTOMATICA DE CANAL
Presione el botón MENU.
1
Presione el botón SET + ó – hasta que el indicador "CH SETUP" empiece
2
a parpadear seguidamente, y a continuación presione el botón ENTER.
Presione el botón SET + ó – hasta que el indicador "AUTO CH
3
MEMORY" empiece a parpadear seguidamente, y a continuación
presione el botón ENTER. El TV comenzará a memorizar todos los
canales disponibles en su área. Los números de canal permanecerán en
rojo hasta que se complete la memorización automática.
4
Presione el botón MENU dos veces para volver a la imagen normal de
TV.
PARA AÑADIR/BORRAR CANALES
Presione el botón MENU.
1
Presione el botón SET + ó – hasta que el indicador "CH SETUP"
2
empiece a parpadear seguidamente, y a continuación presione el
botón ENTER.
Presione el botón SET + ó – hasta que el indicador "ADD/DELETE"
3
empiece a parpadear seguidamente, y a continuación presione el
botón ENTER.
Seleccione los canales deseados a agregar o borrado mediante los
4
botones de Selección Directa de Canal (10 teclas, 0-9), el botón CH /
o el botón SET + ó –.
Presione el botón ENTER para seleccionar ADD o DELETE. Si un
5
canal no memorizado se ha seleccionado (paso 4), el indicador de
canal será en rojo. Presione el botón ENTER si usted desea añadir el
canal no memorizado. Cuando un canal se añadido, el indicador de
canal cambiará de rojo a verde y el canal será memorizado.
Si un canal memorizado se ha seleccionado (paso 4), el indicador de
canal será en verde.
Presione el botón ENTER si usted desea borrar el canal de la
memoria. Cuando el canal se borrado, el indicador de canal cambiará
de verde a rojo.
Repita los paso 4 y 5 para ser añadido o borrado cada canal.
6
Presione el botón MENU tres veces después de añadir o borrar todos
los canales deseados, para volver a la imagen normal de TV.
MENU
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
+
á
/ – / ENTER / MENU
+
〈
/
– / ENTER / MENU
MENU
+
á
/ – / ENTER / MENU
+
〈
/
– / ENTER / MENU
á
ñ
TV
CATV
AUTO CH MEMORY
ADD / DELETE
CH SETUP
PICTURE
LANGUAGE
V-CHIP SET
ñ
TV
CATV
AUTO CH MEMORY
ADD / DELETE
〉
〉
ñ
AJUSTE DE IMAGEN
Se pueden hacer los ajustes de color definicion, contraste, brillo y tinte.
1
Presione el botón MENU.
Presione el botón SET + ó – hasta que el indicador al lado de "PICTURE"
2
empiece a parpadear y presione el botón ENTER.
3
Presione el botón ENTER repetidamente para seleccionar el punto que desea
ajustar.
BRIGHTNESS
(BRILLO)
4
Presione el botón SET + ó – dos veces para hacer el ajuste.
BRILLO
CONTRASTE
COLOR
TINTE
DEFINICIONle imagen es más suave
PARA VOLVER AL AJUSTE INICIAL
Presione el botón RESET cuando aparece en la pantalla el modo de ajuste de imagen.
CONTRAST
(CONTRASTE)
aumenta el brillo
aumenta el contraste
color brillante
color hacia el verde
le imagen es más nítida
COLOR
(COLOR)
+
TINT
(TINTE)
SHARPNESS
(DEFINICION)
–
disminuye el brillo
disminuye el contraste
tiene un color pálido
color rojizo
CONEXIONES DE TOMA AUDIO/VIDEO
La instalación exacta a utilizar para hacer las conexiones de los distintos componentes de video y
audio en el TV depende del modelo y funciones de cada componente. Confirme en el manual de
instrucciones de cada componente para la posición de las entradas y salidas de video y de audio.
Los diagramas de conexión a continuación son sugerencias. Puede ser necesario modificarlos según
los equipos que posee. Los diagramas muestran sólo las conexiones de componentes de video y
audio.
SELECCION TV/AV
Si conecta el TV en la videograbadora, videocámara o juego
de TV, puede seleccionarlo presionando el botón TV/AV.
Presione repetidamente el botón TV/AV para seleccionar
el modo deseado.
Aparecerá “AUX” en la pantalla durante 4 segundos.
AUX
1. Para conectar el TV a una videograbadora
VCR
A salida de
Audio/Video
(no está incluido)
Frente del TV
VIDEO
AUDIO
ANTES DE SOLICITAR SERVICIO
2. Para conectar el TV a un juego de TV
El TV puede utilizarse también como pantalla para
muchos juegos de video. Sin embargo, debido a que
existe una gran variedad de tipos diferentes de señales
generadas por estos aparatos y diferentes requisitos de
conexión correspondientes, no se han incluido todas las
posibilidades posibles en los diagramas de conexión
sugeridos. Para más detalles,deberá consultar el manual
de instrucciones de cada componente.
A salida de Audio/Video
TV GAME
3. Para conectar el TV a la videocámara
Para reproducir de la videocámara, conecte la
videocámara en el TV tal como se indica.
Frente del TV
(no está incluido)
A salida
de AV
Frente del TV
(no está incluido)
Antes de solicitar servicio, verifique los puntos síntoma y posible solución en la siguiente tabla.
POSIBLE SOLUCIONSINTOMA
El televisor no funciona.
Sonido de baja calidad o ausencia
de sonido.
Imagen de baja calidad o
ausencia de imagen.
Mala recepción en algunos
canales.
Mala definición de los colores o
ausencia de color.
La imagen presenta oscilación o
desplazamiento.
La recepción CATV no es
posible.
Aparecen barras horizontales o
verticales en la pantalla.
La recepción no es posible más
allá del canal 13.
El televisor no puede ser
operado a control remoto.
El televisor se apaga.
La función de subtítulo cerrado no
es activada.
La lengua deseada no se muestra.
• Verifique que el cable de alimentación esté conectado.
• Pruebe con otro tomacorriente de CA.
•
La alimentación está desconectada; revise el fusible o el interruptor automático.
• Desconecte la unidad, y vuelva a conectarla al cabo de una hora.
• La estación o el servicio de TV cable están con problemas; sintonice otra
estación.
• Verifique los ajustes de sonido (volumen y silenciamiento).
• Determine si hay posibles fuentes de interferencia.
• La estación o el servicio de TV cable están con problemas; sintonice otra
estación.
• Verifique que haya canales almacenados en la memoria.
Revise las conexiones de la antena o sistema CATV; reoriente la antena.
•
• Determine si hay posibles fuentes de interferencia.
• Verifique los ajustes de los controles de imagen.
• La estación o el servicio de TV cable están con problemas; sintonice otra
estación.
• Verifique que haya canales almacenados en la memoria.
• La señal de la estación es débil; reoriente la antena.
• Determine si hay posibles fuentes de interferencia.
• La estación o el servicio de TV cable están con problemas; sintonice otra
estación.
• Verifique que haya canales almacenados en la memoria.
• Verifique los ajustes de los controles de imagen.
Revise las conexiones de la antena o sistema CATV; reoriente la antena.
•
• Determine si hay posibles fuentes de interferencia.
• La estación o el servicio de TV cable están con problemas; sintonice otra
estación.
• Verifique que haya canales almacenados en la memoria.
• El servicio CATV está transmitiendo una señal codificada.
• Reoriente la antena.
• Revise todas las conexiones del sistema CATV.
• Ajuste el modo TV/CATV al modo CATV mediante la selección de menú
en la pantalla.
La estación o el servicio de TV cable están con problemas; pruebe con
•
otra estación.
• Revise las conexiones de la antena y reoriente la antena.
• Determine si hay posibles fuentes de interferencia.
• Asegúrese de que el modo TV/CATV esté ajustado a la posición
apropiada en la selección de menú de la pantalla.
• Si está usando una antena, revise las conexiones de la antena de UHF.
• Las pilas están débiles o agotadas, o han sido insertadas en forma
incorrecta.
• El remoto está fuera de la gama, acérquese al TV dentro del entorno de
(15 pies).
• Asegúrese de apuntar la unidad de control remoto hacia el sensor de
control remoto.
• Verifique que no haya obstáculos entre la unidad de control remoto y el
televisor.
• Asegúrese de que el cable de alimentación esté conectado.
• La estación sintonizada no está transmitiendo.
• El temporizador de desactivación automática ha sido activado.
• El suministro de energía se ha interrumpido.
• Estación de TV está experimentando problemas o programa sintonizado
no es en modo de subtítulo cerrado. Pruebe en otro canal.
• Asegúrese de conexión de CATV o antena VHF/UHF, reposición o gire
antena.
• Precione el botón de TV/CAP/TEXT para encender la codificador de
subtítulo cerrado.
• Seleccione la lengua apropiada en las selecciones de menú.
SISTEMA DE DESMAGNETIZACIÓN
Esta televisión tiene un circuito de desmagnetización que eliminará todas las distorsiones de
color de la pantalla del televisor causadas por un exceso de magnetismo que se acerque
demasiado al televisor. Este circuito está diseñado para funcionar una vez cuando se enchufe
la unidad por primera vez. Si se ven pequeñas distorsiones de color en algunos puntos de la
pantalla, desenchufe el televisor durante 15 minutos aproximadamente. Cuando se vuelva a
enchufar el televisor, el circuito de desmagnetización funcionará una vez par eliminar cualquier
distorsión de color. Repita este procedimiento en cualquier momento en que el televisor sea
magnetizado accidentalmente o bien se mueva o se cambie de lugar.
ESPECIFICACIONES
Alimentación de CA:
Modelo
Consumo de CA:
Construcción del chasis:
Tubo de imagen:
Résolution horizontale:
Potencia nominal de salida de audio:
Altavoz:
Tipo de sintonizador:
Unidad de control remoto:
Canales de recepción:
Impedancia de entrada de antena:
Entradas:
Dimensiones:
Peso:
ACCESORIOS
Unidad de control remoto
Antena telescópica (sólo MT1134)
120 V, 60 Hz
54 watts
CI de estado sólido
13" (medido diagonalmente)
260 lignes
1,0 watts
3", gama completa, 8 ohmios
Sintetizador de frecuencias PLL a cuarzo para 181 canales
Infrarroja, de acceso directo, 2 pilas AAA (no suministradas)
VHF2-13
UHF14-69
CATV 01-97 (5A)-(A-3)
Entrada coaxial de 75 ohmios (VHF/UHF/CATV)
Video: 1,0 Vp-p 75 ohmios
Audio: 300 mV, 47k ohmios
14-1/4"(ancho) x 14-3/16"(prof) x
12-5/8" (alto.)