Memorex mph 6995 User Manual
Specifications and Main Features
- Temperature Range: -10~+50 C
- Frequency Modulation: FM
- RX Frequency: 902.052 MHz–904.002 MHz TX
- Frequency: 925.997 MHz–927.947 MHz
- Power Supply: 9V 350mA from a power supply
- Physical dimensions: 187mm x 225mm x 57mm
- Weight: 600grams = 21.2 ounces
- Handset RX Frequency: 925.997 MHz – 927.947 MH
- Handset TX Frequency: 902.052 MHz – 904.002 MHz
- Rechargeable Nickel-Cadmium battery Heaver size: 85mm x 60mm x 243mm
- Total weight with battery: 277.4 grams=0.6093 pounds
- Battery: BT-905, capacity 600mAH
- Talking Mode: 7 hours
- Standby Mode: 14 days
- Talk Range: 700meters
- Talk time: 7hours
- Standby Range: Up to 14days
- Keypad Display: 32-digit display
- Page features: Locate feature
- Volume features: Ringer volume control
- Recording features: Memory records for up to 15 hours
- Conversation Recording and Voice Memo
- Call Waiting Calling Name Display
- 30 Calling From Name Display Memory
- 10 One Touch Memory Speed Dial Numbers
- Dialing able both in Pulse and Tone
- Retrieval of Messages left by Personnel or Account Holders Remotely
- Having an Option of Pre-recorded Greetings
- Compatibility with Hearing Aids Technology
- Working with AutoTalk and AutoStandby Functions
Frequently Asked Questions
- Q: How is the base station prepared for use?
A: Detailed steps on how to prepare the base station for use can be found on page 10 of the manual.
- Q: The battery of the handset is what kind?
A: The battery of the handset is a rechargeable Nickel Cadmium (BT-905) battery pack.
- Q: How can I record a phone conversation on this device?
A: Start the recording by pressing the TALK key and then pressing and holding the Record button of the base unit.
- Q: The procedure for changing the ringer sound.
A: Adjust the ringer sound while on standby mode by pressing Volume up or Volume down keys.
- Q: How many Caller ID messages can the stored phone hold?
A: Maximum number of thirty as Caller ID messages.
- Q: What is the course of action to take when battery does not hold a charge?
A: The battery may need to be replaced if it does not hold a charge under normal use.
- Q: Is it possible to install the base unit on a wall instead of using a shelf?
A: Yes, there is a a wall mounted option for the base unit which can be done with the standard wall plate discussed on page 51.
User Manual
Loading...