Memorex MLT3221 Owner’s Manual
_marex _
Widescreen LCD HDTV
with full function remote control
........................ Model MLT3221
WEEE
This product contains electrical or electronic materials. The presence
of these materials may, if not disposed of properly, have potential
adverse effects on the environment and human health. Presence
of this label on the product means it should not be disposed of as
unsorted waste and must be collected separately. As a consumer, you
are responsible for ensuring that this product is disposed of prop-
erly.
I-II---II111"
This TV incorporates High-Definition Multimedia Interface (HDMI TM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
DD _ Manufactured under license from Dolby Laboratories.
I# I Q | T A L Dolby and the double -D symbol are trademarks of Dolby Laboratories.
c os
LISTED
_t:, L,
This Class B Digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Get apparell num6dque de la class B respecte toutes les exigences du
R6glemnte sur le mat6rielbrouilleur du canada.
CONTENTS
m Warnings and Precautions
Important Safety Instructions ....................................................................................... 2
M Chapter I Introducing the LCD TV
Key Features ............................................................................................................... 5
Package Contents ....................................................................................................... 6
Setting Your LCD TV .................................................................................................... 7
Your LCD TV ................................................................................................................ 9
Your Remote Control .................................................................................................. I1
M Chapter 2 Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... I3
Connecting a VCR ..................................................................................................... I8
Connecting a Video Camera or Game Console ........................................................ I9
Connecting a DVD Player .......................................................................................... 20
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 22
Connecting an AV Equipment with HDMI Connector ................................................. 23
Connecting an AV Equipment with DVl Connector .................................................... 24
Connecting a PC ........................................................................................................ 25
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System ........................ 26
E Chapter 3 Using the Features
Wide Screen Viewing ...................................................................................... 27
Operating the Menu ........................................................................................ 28
Customizing the VIDEO Settings ...................................................................... 30
Customizing the AUDIO Settings ...................................................................... 32
Customizing the TV Settings ............................................................................ 34
Customizing the SETUP Settings ...................................................................... 36
Using the Program Block Settings ..................................................................... 40
Using the Program Guide ................................................................................ 45
M Troubleshooting ....................................................................................................46
m Specification ...........................................................................................................47
Warnings and Precautions
FCC NOTICE:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced
radio/TV technician for help.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN
WARNING:
OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
AND ANNOYING INTERFERENCE, USE THE
WARNING:
RECOMMENDED ACCESSORIES ONLY.
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT covered
SURGE PROTECTORS:
under warranty for this product.
ATTENTION:
POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE
LA LAME LA PLUSLARGE DE LAFICHE DANS LABORNE
CORRESPONDANTE DE LA PRISES ET POUSSER
JUSQU'AU FOND.
To assure continued compliance, follow the attached
installation instructions and use only shielded cables when
connecting to other devices. Modifications not authorized by
CC WARNING:
the manufacturer may void user's authority to operate
his device.
ICES-003.
Cet appareil num6rique de la classe Best conforme & la
This Class B digital apparatus complies with Canadian]
norme NMB-003 du Canada.
ihis TV is capable of receiving unscrambled digital
programming for both cable and external UHF/VHF/
ntenna (ATSC) and also can receive NTSC (cable/
nd external UHF/VHF antenna) programs. /
J
Warnings and Precautions
within an equilateral triangle is intended to alert
CAUTION I
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Fhis Caution Marking and Rating Label are located at the rear enclosuE_ of the unrL)
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
._ The lightning flash with arrowhead symbol
the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient magnitude to
consfltuto a dsk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth
for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water for example: near a bathtub, washbowl, kitchen sink or laundry tub; ,O,T_ECA,TW*,,,,,G
8. ACCESSORIESina wet basement; or near a swimming pool. _/_i _l
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and _0_
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
WarningsandPrecautions
13,LIGHTNING
Toprotectyourproductfromalightningstorm,orwhenitisleftunattendedandunusedforlongperiodsoftime,unplugit
fromthewalloutletanddisconnecttheantennaorcablesystem.Thiswillpreventdamagetotheproductduetolightning
andpower-linesurges.
14.POWERLINES
Anoutsideantennasystemshouldnotbelocatedinthevicinityofoverheadpowerlinesorother electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15, OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16, OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the
product, be sure the antenna system is
grounded so as to provide some protection
against voltage surges and built-up static
charges. Section 810 of the National
Electric Code, ANSI/NFPA 70, provides
information with respect to proper grounding
of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge product, size of grounding
conductors, location of antenna discharge
product, connection to grounding electrodes ..... io,Ai tcr,[I......... =_ :_:_1__ '_J')"Ol_e
and requirements for grounding electrodes, s_8_A
18, SERVICING
Do not attempt to service this product NATIONAL ELECTRICAL CODE
yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installeds attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER
Chapter I Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
2 sets of composite A/V inputterminaJs
I set of S-VIDEO terminals
2 sets of component Video input terminals
I VGA/Audio input terminals
2 HDMI/Audio input terminaJs
I set ofAudio(L/R) output terminals
2 SPDIF output terminals (OpticaJ x 1/Coaxial x 1)
I Headphone terminal
The built-in TV tuner to receive HD ATSC
• This function allows the reception of HD broadcasting without the addition of a set top
box.
High Definition Multimedia Interface (HDMI)
• High Definition Multimedia InterFace (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable This system
eliminates the cost, complexity and confusion of multipte cables used to connect
current A/V systems
HDTV Component Video Inputs
• Offers the best video quality for DVD(720p,HD 1080i) and digitaJset-top-box
(720p,HD1080i) connections.
3D Digital Noise Reduction
• This function can digitally reduce image eoise to provide better picture quality.
Film-Mode Detection (3:2 Reverse Pull Down)
• This function can automatically detect content derived from film and adjust the
interiacer's frame matching to provide a more eaturaFIooking, clearer image of the
moving picture.
Chapter I Introducing the LCD TV
Package Contents
Make sure all of the following contents are included.
[] LCD TV [] Bottom Stand(151-700-BF327WV3H)
/Screw Driver and 4 Screws
[] Remote Control [] VIDEO Cable
(845-042-GF1XABH)
[] Power Cord [] AUDIO Cable [] Warranty Card
(601-181-3200-LIH)
[] User's Manual [] Quick Start Guide
These items are all you need to set up and operate the LCD TV in its basic configuration.
ChapterI IntroducingtheLCDTV
Setting Up Your LCD TV
If you prefer to mount your new TV on a wail instead of attaching it to the stand, please
reference the instructions included in the wall mounting kit(not included).
Read all instructions before continuing with the stand installation.
Lift foam packaging material from the top of the LCD out of the box.
Lift LCD out of the box, with the bottom foam packaging material still attached, and place
onto a stable surface.
O O
Stand Shipping box
c. Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging
material from the TV.
d. Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD
with all four screws.
0 Unit
Protective bag
Table
Stand
" 1 _ H_ Packaging matedal
Screw x 4
Packaging material
Chapter I Introducing the LCD TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV's ANT. terminal
(refer to page15-18).
Connect the AC power cord at the back of the TV and connect the power cord to wal! outlet.
O insert two AAA batteries in remote control(battery not included).
f
Step1 Slide the back cover up to open the
battery compartment of the remote
control.
Step2 Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
,J
O Connect other an external AV device (refer to page18-26).
J
Your LCD TV
ht Sid _;_t;ew ,an co
ChapterI IntroducingtheLCDTV
IR
infrared Receiver
LED
The LED light is blue when
the LCD TV is in standby
and the LED {ight indicates
no colour when powered up.
CHANNEL
| Connects to the composite
VIDEO
J Video andAudio output
_ jacks on external video
• equipment
®
R
WOEO_ _N
Connects to the external
headhone for private
listening
Chapter 1 Introducing the LCD TV
VIDEO2 IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI IN
Connects the all digital AV equipment with HDMt connector.HDMI supports enhanced,
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDM{ IN is for
DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external
video equipment.
Connects the PC, or other AV equipment with VGA end
_VGA IN
AUDIO(L/R) output jacks.
HDMJ"_m HOM_2_N VGA m
AUO_O AUO_O r AUO_O
I
YPbPr_IIN
÷* ÷*
¢®,
vloEo Auo_o s VIDEO • AUO_O R
VIQEO2 IN I S VIDEO IN
YPbPrl IN/YPbPr2 IN
Connects to the DVD player, Digital Set-Top-Box, or other AV
equipment with component(YPbPr) video end audio output jacks.
AUDIO OUT-STEREO
, o
YPbPr2 IN
I
Connects to the AUDIO(L/R) input jacks on AV equipment.
_ AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the DIGITAL AUDIO jack on the digital/standard
5.1 audio system.
AIR/CABLE IN
Connects RF input from VHF/UHF antenna or cable
to receive high/standard definition television.
10
AC IN
Connects to the AC power cord.
Your Remote Control
Chapter I Introducing the LCD TV
O (_ Turns the LCD TV and off.
on
O MTS the multi-channels TVCycles through
sound(MTS) options: SAP/MONO/
STEREO
O S.MODE Selects sound effect options: Surround/
Live/Dance/Techeo/Classic/Soft/Rock/
Pop/Off.
O P.MODE picture Vivid/Hi-Bright/
Selects mode:
Cinema/Sport/User
O P.SIZE Cycles through Wide mode settings :
NORMAL/FULL/VVIDE
O CAPTION CycIes through the Closed Caption:
• Antalog Closed Caption:CC1/CC2/
CC3/CC4/T1/T2/T3/T410ff
• Digital Closed Caption:Service1/
Service21Service31Service4/Service5/
Service6/Off
O SLEEP Cycles through the LCD TV sleep timer:
OFF/10/20/30/40150160190/120 mins
00-9 Setect and switch to a channel by using
0-9 buttons
In HDTV mode, use with 0-9 and *
buttons to select a digital channels
O JUMP Returns to previously selected channel
_MUTE Mutes and restores the audio
845-042-GFIXABH
_ VOL.+- Increases and decreases volume
_ CH.+- Scans up and down the channeIs
_) INPUT Pressing INPUT display the source list,
use • • to select the video equipment
connected to the video inputs of your
LCD TV : TV/VIDEO1/VIDEO2/VtDEO3/
VlDEO4/VlDEO5/VIDEO6/VIDEO7/
COMPUTER
TV(CABL
ivJlm]={*illI_.li% _
i vJlm]={*)'Jl:i=__:I
• * m *
• * -,-
=TJ ID]=Io1.1[I_)i],_lL
11
Chapter I Introducing the LCD TV
_ GUIDE Displays Program on
the Guide the
screen. Pressing again to turn GUIDE off.
_EXlT Exits the OSD menu
_A • ID,• Cycles through OSD options and
OK selects individuaI menu items.
OK confirms option settings
_INFO Pressing repeatedly displays a variety of
information such as the current channel
and the input source
_MENU Disptays the OSD menu on the screen
@GREEN In Program Guide, press to setect first
program of next day
!_ _ RED In Program Guide, press to select first
program of previous day
_YELLOW In Program Guide, press to view previous
page of detaiIed program description
@ BLUE In Program Guide, press to view next page
of detailed program description.
_LIST Disptays the received channei list
FAV.CH
!_ FREEZE In TV mode, pressing FREEZE to freeze
Pressing FAV.CH display favorite channeIs
the current picture, press again to restore
the picture
_ TIMER the current time the
Displays
on screen
12
Chapter 2 Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner's manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Antenna
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended
The foIiowing is a brief explanation of the type of connection that is provided with the various antenna
systems
F-type connector
75-ohrn coaxial cable (round)
300-ohm twin-lead cable (flat)
13
Chapter 2 Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
_t F/UHF
enna (3n0°Oi/75ci°_demd_dapter_HFqAntenna
lead cable
B. Separate VHF and/or UHF antennas
75-ohm
coaxial cable
(C°_bi_edd. "_,n-- - _-
"_'_ 75-ohn_ .. I VHF
L ena
300-ohm twin-
lead cable
14
Fenna
Loading...