Memorex MLT1921 Owner’s Manual

CMMB/77DrP,X_
Widescreen LCD HDTV
Pantalla ancha de HDTV LCD
__ H,_mi __DD_
...................... .................................... DiGiTAL
MLT1921
This product contains electrical or electronic materials. The presence
of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence
of this label on the product means it should not be disposed of as
unsorted waste and must be collected separately. As a consumer, you
are responsible for ensuring that this product is disposed of prop=
erly.
H rlll
This TV incorporates High-Definition Multimedia Interface (HDMF M)technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC,
r]['-i IDOLBYI Manufactured under license from Dolby Laboratories.
D I G I f I L Dolby and the double -D symbol are trademarks of Dolby Laboratories.
LISTED
46FG
E233207
This Class B Digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Get apparelt num6rique de la class B respecte toutes les exigences du
R6glemnte sur le mat6rielbrouilleur du canada.
CONTENTS
m Warnings and Precautions
Important Safety Instructions ....................................................................................... 2
m Chapter 1 Introducing the LCD TV
Key Features ............................................................................................................... 5
Package Contents ....................................................................................................... 6
Setting Your LCD TV .................................................................................................... 7
Your LCD TV ................................................................................................................ 9
Your Remote Control .................................................................................................. 11
m Chapter 2 Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... 13
Connecting an A/V Device with Composite Connector .............................................. 18
Connecting an A/V Device with S-Video Connector .................................................. 19
Connecting an A/V Device with Component(YPbPr) Connector ................................ 20
Connecting an AV Equipment with HDMI Connector ................................................. 21
Connecting an AV Equipment with DVl Connector .................................................... 22
Connecting a PC ........................................................................................................ 23
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System ........................ 24
m Chapter 3 Using The Features
Wide Screen Viewing ...................................................................................... 25
Using the Program Guide ................................................................................ 26
Operating the Menu ........................................................................................ 27
Customizing the VIDEO Settings ...................................................................... 29
Customizing the AUDIO Settings ...................................................................... 31
Customizing the TV Settings ............................................................................ 33
Customizing the SETUP Settings ...................................................................... 35
m Troubleshooting ....................................................................................................43
m Specifications ........................................................................................................44
Warnings and Precautions
FCC NOT|CE:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit
not expressly approved by the party responsibme
for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmfum interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation, if this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected. Consult the dealer or an experienced
radio/TV technician for help.
WARNING: TO REDUCE THE RiSK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNmNG: TO REDUCE THE RiSK OF FIRE OR ELECTRIC SHOCK,
AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
SURGE PROTECTORS: It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT covered under warranty for this product.
ATTENTION:
POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU AU FOND.
toFCCWARN|NG: ]
assure continued compliance, follow the attached
installation instructions and use only shielded cables when
/connecting to other devices. Modifications not authorized by/ _he manufacturer may void user's authority to operate /
Lthis device. J
This Class t3 digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme & la norme NMB-003 du Canada.
This TV is capable of receiving unscrambled digital programming for both cable and external UHF/VHF / antenna (ATSC) and also can receive NTSC (cable /
and external UHF/VHF antenna) programs.
Warnings and Precautions
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALHED SERVICE PERSONNEL. (This Caution Marking and Rating Label are located at the rear enclosure of the unit.)
Z_ The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's
enclosure that may be of sumcient magnitude to constitute a risk of electric shock to persons,
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIREOR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTR C SHOCK, MATCH THE W DE BLADE OF THE PLUG TO THE W DE SLOT AND FULLY NSERT.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna. 1, READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2, RETAIN iNSTRUCTiONS
The safety and operating instructions should be retained for future reference.
3, HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW iNSTRUCTIONS All operating and use instructions should be followed.
5. CLEANING Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7, WATERAND MOISTURE
Do not use this product near water-for example: near a bathtub, washbowl, kitchen sink or laundry tub; ,O,TA_L_CA,TWA,,_,G in a wet basement; or near a swimming pool.
8. ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
(_ymbolp,ovido_byR_TAC)
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10, POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label, if you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARiZATiON This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature, if you are unable to insert the plug fully into the outlet, try reversing the plug. if the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do net defeat the safety purpose of the polarized plug.
12, POWER=CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
WarningsandPrecautions
13.L|GHTN|NG Toprotectyourproductfromalightningstorm,orwhenitisleft unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning end power-line surges.
14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LiQUiD ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING ..... --
,f ..... tside antenna is connected to the _.,
product, be sure the antenna system is i " _,N grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National
Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge product, size of grounding conductors, location of antenna discharge
product, connection to grounding electrodes ........ _..... CrRI.......
and requirements for grounding electrodes, s_9_A
18. SERV|CING EXAMPLE OF ANTENNA GROUNDING AS PER DO not attempt to service this product NATIONAL ELECTRICAL CODE
yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
20, SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
21, WALL OR CEiLiNG MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQU|RING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged. b. if liquid has been spilled or objects have fallen into the product.
c. if the product has been exposed to rain or water. d. if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e. if the product has been dropped or the cabinet has been damaged. f. When the product exhibits a distinct change in performance-this indicates a need for service.
23. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM iNSTALLER This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
Chapter I Introducing the LCD TV
Chapter 1 Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
1 composite VIDEO input terminal 1 S-VIDEO terminals
1 sets of component Video input terminals 1 VGA/Audio input terminals 1 HDMI/Audio input terminal 1 set of Audio(L/R) output terminals 1 SPDIF output terminal (Coaxial x 1) 1 Headphone terminal
The built-in TV tuner to receive HD ATSC
This function allows the reception of HD broadcasting without the addition of a set top box.
High Definition Multimedia Interface (HDMI)
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable. This system eliminates the cost, complexity and confusion of multiple cables used to connect current A/V systems.
HDTV Component Video Inputs
Offers the best video quality for DVD(1080i, 720p) and digital set-top-box (1080i, 720p)
connections.
2D Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
Film-Mode Detection (3:2 Reverse Pull Down)
This function can automatically detect content derived from film and adjust the interlacer's frame matching to provide a more natural-looking, dearer image of the moving picture.
Chapter1IntroducingtheLCDTV
Package Contents
Make sure all of the following contents are included.
I-v1 LCD TV [_ STAND
I-v1 Remote Control I-v1
845-042-GF1XAB-MEH
I-v1 Power Cord I-v1
600-151-3200-LIH
VIDEO Cable 621-151-2000H
I-v1 Warranty Card
154-700-BF198LH
I-v1 AUDIO Cable
621-151-60002H
User's Manual
Quick Start Guide
*Consumer Replaceable Part
(See page 45 to order.)
These items are all you need to set up and operate the LCD TV in its basic configuration.
ChapterI introducingtheLCDTV
Setting Up Your LCD TV
Follow the instructions below to install the TV stand:
O Open the box, and make sure all necessary parts are in the box. The package
contains:
LCD TV
O
Cover an even stable surface with a soft cloth. Place the LCD TV unit face-
down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown:
Then push until stand into the LCD TV's stand socket.
Viewing Angle Adjustment
This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted by slightly rotating the monitor to the front or rear.
Stand
Chapter1IntroducingtheLeD TV
O
Use TV Antenna cable( not included)to connect the VHF/UHF signal to the LCD TV's ANT.
terminal (refer to page 13-17).
O
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
O
Insert the two batteries in remote control (batteries not included).
Step1 Slide the back cover up to open the
battery compartment of the remote
control.
Insert two AAA size batteries.
Step2
Make sure to match the (+) and ( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment. Slide the cover back into place.
O Connect other an external AV device (refer to page 18-24).
Your LCD TV
0
ChapterI IntroducingtheLCDTV
7 O
J
@
0
O
I IR Infrared Receiver (IR)
2 LED
3 HEADPHONE Connects to the external headphone for private listening.
4 POWER
5 INPUT Press to select different input signal sources.
6 MENU
7 CHANNEL Changes TV channels. Selects menu item when in the OSD mode.
8 VOLUME Adjusts the volume up and down. Change values for items when in the OSD
The LED light is orange when the LCD TV is in standby and the LED light is blue when powered up.
Power Button Turns the LCD TV on and off.
Press once to display the OSD (on screen display), press again to turn the OSD off.
mode.
Chapter 1 introducing the LCD TV
Connects to the S-Video/Composite VIDEO and AUDIO(L/ R) output jacks on external video equipment.
Connects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks.
_10
j ! PONGA,. POAUO,O,.! ....... ! '
Connects to the AC power cord. |
J
Connects the PC, or other AV equipment with VGA and AUDIO
output jacks.
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio.
Connects to the audio jack on the digital/standard 5.1 audio system.
Connects RF input from VHF/UHF antenna or cable to receive high/standard definition television.
Your Remote Control
Chapter I Introducing the LCD TV
O (_ Turns the LCD TV on and off.
O MTS the multi-channels TV
Cycles through sound(MTS) options: SAP/MONO/
STEREO
O S.MODE Selects sound effect options: Surround/
LivelDance/TechnolClassic/Soft/Rockl Pop/Off.
O P.MODE Selects picture mode: Vivid/Hi-Bright/
Cinema/Sport/User
.... ...................
NORMAL/FULL/WIDE/ZOOM
O CAPTION Cycles through the Closed Caption:
O SLEEP Cycles through the LCD TV sleep timer:
0-9 Select and switch to a channel by using
JUMP Returns to previously selected channel.
MUTE Mutes and restores the audio
_ VOL.+- Increases and decreases volume.
_ OH.+- Scans up and down the channels
Anlalog Closed Caption:CCl/CC2/ CC3/CC4/TT1/TT2/TT3/TT4/Off
Digital Closed Caption:Service1/ Service2/Service3/Service4/Service5/
Service6/Off
OFF/10/20/30/40/50/60/90/120 mins
0-9 buttons.
In HDTV mode, use with 0-9 and buttons to select a digital channels.
,11
INPUT Pressing INPUT display the source list,
use A T to select the video equipment connected to the video inputs of your LCD TV:TV/VlDEO I/VlDEO2/VIDEO3/ VlDEO4/COMPUTER
rill]=[o]IFi_|
tiI i] =[i)*ll_*'_2i I i] =Ill
rili] =[l:_ll'd ;j 1"3_J3 rill] =lIE !1 ;11} ?_ll
Chapter 1 Introducing the LCD TV
GUIDE Displays Program on screen,
the Guide the
Pressing again to turn GUIDE off.
EXIT Exits the OSD menu.
@ A_'_-_ Cycles through OSD options and
OK selects individual menu items.
OK confirms option settings.
N FO
1 Pressing repeatedly displays a variety
of information such as the current channel and the input source.
MENU Displays the OSD menu on the screen.
@ _!GREEN In Program Guide, press to select
first program of next day.
@ ,<_ RED In Program Guide, press to select first
program of previous day.
_,YELLOW In Program Guide, press to view previous page
of detailed program description.
@ '@_BLUE In Program Guide, press to view next page of
detailed program description.
LIST Displays the received channel list
_[ i,
_12
FAV.CH Pressing FAV.CH display favorite channels.
FREEZE In TV mode, pressing FREEZE to
freeze the current picture, press again to restore the picture.
TIMER Displays the current time on the screen.
Chapter 2 Installing the LCD TV
Chapter 2 Installing the LCD TV
Refer to the owner's manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
Connecting a "IV Cable or an Antenna
The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
F-type connector
75-ohm coaxial cable (round)
.13
300-ohm twin-lead cable (flat)
Chapter 2 Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF Antenna
300-ohm _-_ Antenna
lead cable
B. Separate VHF and/or UHF antennas
300/75-ohm adapter _ (not included) ,_0_H FlU HF
75-ohm coaxial cable
--14
enna
Combiner 300-ohm twin-
(not included)__
. nna
F 75-ol_rn .. I VHF
/
w'n-
Chapter 2 Installing the LCD TV
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/
or program owner.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrarnbler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below.
RF switch (not included)
VHF/UHF IN (not included) /
,15
3
splitter (not nc uded) ==" u
2 set signal I
Cable TV Line
Chapter2InstallingtheLCDTV
O Usean antenna cable to connect the TV signal to the LCD TV's TV CABLE terminal.
O Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Press the_ button on the remote to turn on the LCD TV.
O
Press the Input button on the remote to display the Input List. Use the A _r buttons to select TV and press the OK button,
--16
Chapter 2 Installing the LCD TV
O
Press the MENU button on the remote control to display the Main menu, and use the
_,- buttons to select the TV.
O
Press the T button to select Channel Scan, and press the OK button. The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if interrupted)
O
Press the OK button to display the received channel list, then press A T to select a
channel. Or, use the with 0-9 buttons to select digital channel( for example 9.1 )
.17
,=
Hi
Chapter2InstallingtheLCDTV
Connecting an NV Device with Composite Connector
Rear of TV
0
_L COAXIAL
_ I÷
rT
m
GAMECONSOLE CAMERA
tJ
AUDIO Cable v_
m
Use a composite cable to connect the external A/V device's composite video/audio jacks to
the LCD TV's VIDEO IN jacks.
VCR
DVD PLAYER
SATELLITE RECEIVER
Satellite
antenna cable
--18
e
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
0
Press the_button on the remote to turn on the LCD TV.
0
To view the A/V device's with Composite input, press the INPUT button on the remote, then
using the A or _r button on the remote to select VIDEO 1, then press OK button.
Connecting an NV Device with S-Video Connector
Chapter2InstallingtheLCDTV
GAMECONSOLE CAMERA
AUDIO Cable F
S-VIDEO Cable
O Use an audio cable to connect the external A/V device's audio output jacks to the LCD
TV's audio inputs. Use a S-Video cable to connect the external A/V device's S-Video output jack to the LCD TV's S-Video IN input jack.
e
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
o
Press the _ button on the remote to turn on the LCD TV.
o
To view the A/V device's with S-Video input, press the INPUT button on the remote, then using the _ or _' button on the remote to select VIDEO 2, then press OK button.
VCR
TV CABLE BOX
SATELLITE RECEIVER
Satellite
antenna cable
.19
Chapter2InstallingtheLCDTV
Connecting an AN Device with Component(YPbPr) Connector
Rear of TV
GAME CONSOLE CAMERA
_1 vc.
Ph,
DVD PLAYER
Y
TV CABLE BOX
SATELLITE RECEIVER
O
Use a component cable to connect the external A/V device's component output jacks to the LCD TV's YPbPr IN input jacks.
Use an audio cable to connect the external A/V device's component audio jacks to the LCD
TV's audio input jacks.
@
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
Press the _ button on the remote to turn on the LCD TV.
0
To view the A/V device's with component input, press the INPUT button on the remote, then
using the _ or _' button on the remote to select VIDEO 3, then press OK button.
Satellite
antenna cable
20
Connecting an AV Equipment with HDMI Connector
Rear of _
HDM! Cable
Chapter2InstallingtheLCDTV
DVD PLAYER
TV CABLE BOX
AV EQUIPMENT
@
Use a HDMI cable to connect the external A/V device's HDMI output jack to the LCD TV's HDMI IN jacks.
@
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
0
Press the _ button on the remote to turn on the LCD TV.
@
To view the A/V device's with HDMI input, press the INPUT button on the remote, then
using the A or _r button on the remote to select VIDEO 4, then press OK button.
21
Chapter2installingtheLCDTV
Connecting an AV Equipment with DVl Connector
Rear of TV
!
AUDIO Cable
HDMI-to-DVl Cable
AV EQUIPMENT
O
Use a HDMI-to-DVl cable to connect the AV equipment's DVl output jack to the LCD TV's HDMI IN jacks.
Use an audio cable to connect the AV equipment's audio output jacks to LCD TV's HDMI
AUDIO jacks.
e
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
Press the _button on the remote to turn on the LCD TV.
0
Press the INPUT button on the remote, then using the A or _r button on the remote to
select VIDEO 4, then press OK button.
22
Connecting a PC
Rear of TV
HDMIIN
Chapter 2 Installing the LCD TV
AUDIO Cable
VGA Cable
PC
0
Use a D-SUB cable to connect the PC's D-SUB output jack to the LCD TV's VGA input
jack. Use an audio cable to connect the PC's audio output jacks to LCD TV's.
e
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
0
Press the t_ button on the remote to turn on the LCD TV.
0
Press the INPUT button on the remote, then using the A or _r button on the remote to
select COMPUTER(VGA), then press OK button.
23
Chapter2installingtheLCDTV
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
HDMIiN
Audio Coaxial Cable
Audio Receiver or Amplifier with coaxial input jack
O
Use an audio coaxial cable to connect the audio receiver's audio LINE IN jacks to LCD
TV's Coaxial OUT jacks.
O
Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
O
Press the t_ button on the remote to turn on the LCD TV.
24
Chapter 3 Using the LCD TV
Chapter 3 USING THE FEATURES
Wide Screen Viewing
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the P.SlZE button repeatedly to select the screen format you want.
O
Displays at 4:3 aspect ratio
i
O
Stretches the image horizontally to keeps the image size consistent in the center of
the screen and stretches the sides
O
Stretches the image vertically and horizontally to fill the screen at 1:1.85
aspect ratio
O
Stretches the image vertically and horizontally to fill the screen at 1:2.35
aspect ratio
25
Chapter3UsingtheLCDTV
Using the Program Guide
The Program Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability, etc.
With the LCD TV connected to a television programming source, press the INPUT button on the remote control and use the _, _' buttons to select TV and press the OK button.
Press the GUIDE button on the remote control, the Program Guide will appear on the
screen:
Press the ,_ I_ button to select the channel.
Press the A V button to select the program from a list, the Program Guide provides introduction about the current program being shown on each channel.
The Program information in the guide is provided by the broadcasters. It may sometimes
include only the channel number, without a program title or description.
O Press the GUIDE button again on the remote control to exit the Program Guide
26
Chapter 3 Using the LCD TV
Operating the Menu
O Press the _ button to turn the LCD TV on.
e Press the MENU button on the remote control, the on-screen menu will appear on the
screen. Use the _ buttons to select your main menu option.
Allows you to make adjustments to your picture settings.
If the signal source is TV/VIDEO/S-VIDEOIYPbPr/ If the signaE source is VGA, the VIDEO MENU HDMI, the VIDEO MENU appears as: appears as:
Allows you to customize the audio options and effects.
If the signal source is VIDEO/S-VIDEO/YPbPr/ If the signal source is TV, the AUDIO MENU HDMINGA, theAUDIO MENU appears as: appears as:
27
Loading...
+ 66 hidden pages