Memorex CH2, CH3, CH4 User Manual
®
Chipper/Shredder with 2-Way Feed
Owner’s Manual
This manual contains important safety instructions for
Chipper/Shredder models: CH2, CH3, CH4
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS
CAREFULLY SAVE THESE INSTRUCTIONS.
TM
For product questions or service,
CALL 1-919-550-3259
or go to www.beastpowerequipment.com
When you call the help-line you will need to have the following information:
Date of Purchase: _______________________
Location of Purchase: _______________________
Serial #: _______________________
Model #: _______________________
Heavy Duty Power Equipment
Copyright© 2009 by GXi Outdoor Power, LLC. All rights reserved.
No part of this publication can be reproduced or distributed without prior written permission of GXi Outdoor Power, LLC
Clayton, NC 27520 USA.
Brush Master™ is a trademark of GXi Outdoor Power, LLC
DEK® is registered trademark of GXi Outdoor Power, LLC
DEK® is exclusively distributed by GXi Outdoor Power, LLC
GXi Outdoor Power, LLC reserves the right to discontinue or change specifications or design at any time without notice
and without incurring any obligation what so ever.
The information and specifications included in this publication were in effect at the time of approval for printing.
This manual contains important safety instructions for Chipper/Shredders
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY
SAVE THESE INSTRUCTIONS.
This owner’s manual is considered a permanent part of the chipper/shredder and
should remain with the chipper/shredder if resold.
Rev: 07/2010 Brush Master™ Chipper/Shredder with 2-Way Feed
Heavy Duty Power Equipment
Contents
Warnings ............................................................................ 1
Product Specifications ........................................................ 2
Component Identification ................................................... 3
Missing Parts Order Form…………………………………….4
Safety Information .............................................................. 5
Operating Guidelines ......................................................... 6
Assembly ............................................................................ 7
Important Engine Information ............................................. 8
Operating Instructions ........................................................ 9
Maintenance & Storage .................................................... 10
Troubleshooting ............................................................... 12
Limited Warranty & Service .............................................. 13
Rev: 07/2010
Brush Master™ Chipper/Shredder with 2-Way Feed
Heavy Duty Power Equipment
WARNING
This symbol indicates important safety instructions
which, if not followed, could endanger personal safety
and/or property. Read and follow all instructions in this
manual before attempting to operate this machine.
Failure to comply with these instructions may result in
personal injury. When you see this symbol—heed its
warning.
WARNING
CARBON MONOXIDE GAS
Exhaust contains poisonous carbon monoxide, a colorless
and odorless gas. Breathing exhaust can cause loss of
consciousness and may lead to death.
The Engine Exhaust from this product contains chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm.
WARNING
This machine has a rotating cutting blade capable of
amputating hands and feet and throwing objects. Keep
hands and feet out of openings while machine is running.
Failure to observe these safety instructions could result in
serious injury or death.
WARNING
WARNING: Do not operate this machine unless the chute
deflector has been installed properly.
Warnings
WARNING
Keep bystanders, helpers, pets, and children at least 75
feet from the machine while it is in operation. Stop
machine if anyone enters the area.
WARNING
Wear hearing and eye protection while operating this
machine or if you are within 75 feet of this machine.
Thrown objects which ricochet can cause serious injury to
the eyes.
WARNING
Never wear loose clothes or long jewelry and keep your
long hair under a headgear when operating machine.
Never operate this machine in bare feet or sandals.
Never use machine on a slope or hard smooth floor.
WARNING
Gasoline is extremely flammable and the vapors are
explosive. Serious personal injury can occur when
gasoline is spilled on you or your clothing, which can
ignite. In the event of a gasoline spill, wash your skin and
change clothes immediately.
WARNING: Do not deposit branches larger than 3” x 4”
inches in diameter (depending on Model #, see Model
Specifications table pg 2) in the side chute. Do not
deposit branches larger than 1/4 inches into the funnel.
DO NOT force the branches into this machine, allow the
machine to automatically feed through.
Rev: 07/2010
Brush Master™ Chipper/Shredder with 2-Way Feed
1
Heavy Duty Power Equipment
Training
1. Read, understand, and follow all instructions on the
machine and in the manual) before attempting to
assemble and operate. Keep this manual in a safe
place for future and regular reference and for
ordering replacement parts.
Warnings
7. Do not put hands or feet near rotating parts or in the
feeding chambers and discharge opening. Contact
with the rotating impeller can amputate fingers,
hands, and feet.
2. Be familiar with all controls and their proper
operation. Know how to stop the machine and
disengage them quickly.
3. Never allow children under 18 years old to operate
this machine. Children 18 years old and over should
read and understand the operation instructions and
safety rules in this manual and should be trained and
supervised by a parent.
4. Never allow adults to operate this machine without
proper instruction.
5. Keep bystanders, helpers, pets, and children at least
75 feet from the machine while it is in operation. Stop
machine if anyone enters the area.
6. Never run an engine indoors or in a poorly ventilated
area. Engine exhaust contains carbon monoxide, an
odorless and deadly gas.
Product Specifications
8. Never attempt to unclog either the feed intake or
discharge opening, remove or empty bag, or inspect
and repair the machine while the engine is running.
Shut the engine off and wait until all moving parts
have come to a complete stop. Disconnect the spark
plug wire and ground it against the engine.
NOTE:
The operator or
user is
responsible for
accidents or
hazards
occurring to other
people, their
property, and
themselves.
Chipper/Shredder Model # Specifications
Model # CH2 CH3 CH4
Maximum RPM 3600 RPM 3600 RPM 3600 RPM
Horsepower 9 HP 11 HP 15 HP
Emission Compliance 50 States 49 States 49 States
Fuel Capacity (gal.) 1.59 gal. 1.4 gal. 1.4 gal.
Engine Type Subaru DEK DEK
Displacement (cc) 265 cc 279 cc 420 cc
Walk or Pull either either either
Chipper
Shredder Yes Yes Yes
Maximum Cutting
Thickness Diameter (in.)
Rev: 07/2010 Brush Master™ Chipper/Shredder with 2-Way Feed
Yes Yes Yes
3” x 3” 3” x 3” 3” x 4”
2
Heavy Duty Power Equipment
Component Identification
Fuel Tank
Use regular unleaded fuel. Always
leave about 1” of air gap at the top
of the tank for fuel expansion to
prevent seepage or spills.
Chipper Funnel
Use the chipper funnel to
feed leaves only.
Choke Lever
Move the choke
lever to the CHOKE
position to prepare a
cold engine for
starting.
Fuel Valve
Use the fuel valve
to turn fuel on and
off to engine.
Blade Access Hatch
Remove the blade access
hatch to clean, remove, or
sharpen the chipper/
shredder blade.
Discharge Chute
Chipped materials are
discharged through this
opening. It may be left
open or the chipper
collection bag can be
attached to the chute.
On/Off Switch
Set this switch to On before
using recoil starter. Set
switch to Off to switch off
engine.
Recoil Starter
The starter handle
is located on the
engine. Pull the
starter handle to
start engine.
Serial #:
Stamped on engine block
between funnel and engine
Chipper Chute
Use the chipper chute to
feed longer and/or thicker
pieces of yard waste into the
impeller for chipping.
Depending on the model #,
the chipper/shredder can cut
up to a 3” x 4” in diameter
piece of wood.
Lawn Tractor or
Hardware Bag
This bag contains the assembly
hardware, safety devices and
chipper collection bag. Use the
chipper bag to collect shredded or
chipped material fed through the
chipper chute or hopper
assembly.
If you are missing any parts, please complete the form on the next page and fax it back to us at: 919-550-3277.
Rev: 07/2010
Brush Master™ Chipper/Shredder with 2-Way Feed
3
ATV Hitch
Use this hitch to tow the
chipper/shredder behind
a lawn tractor or ATV
(maximum tow speed is
15 mph).
Loading...