Memorex 53958662 User Manual

capture.

share.

USB Flash Drive

Quick Start Guide

Thank you for purchasing a Memorex USB Flash Drive. Your Flash
Drive is a multi-purpose and universally compatible Portable Storage
Device.

GETTING STARTED:

Step 1 – Check your Operating System (OS):

• For Windows
There is no need to install any drivers! Go straight to Step 2- “Using
Your Flash Drive.”

• For Windows® 98SE (internet access required)
You need to install a USB 2.0 driver for the computer to recognize
the Flash Drive. See “Windows® 98SE Users” below.

• For Windows® NT—NT does not support USB. The Flash Drive is
not supported in this OS.

• For Windows 98® or older – Windows® operating systems prior to
Windows® 98SE do not have adequate USB support, and the
Flash Drive is therefore not supported for use by those operating
systems.

• For Apple Macintosh Mac OS 8.6 or higher (8.6 - 9.x USB 1.1 support only)
There is no need to install any drivers! Go straight to Step 2.

®

Me, Windows® 2000, and Windows® XP

Windows® 98SE Users: (Internet access required @ www.memorex.com)

Note: Do not insert your USB Flash Drive into your USB port until you have successfully

completed steps a. through f. below.

a. Turn on your computer and wait for the Windows desktop to appear.

b. Close any applications you may have running.

c. Download the necessary driver by launching your internet browser
and going to the Memorex website at
www.memorex.com/html/support.php

• Select DOWNLOAD SOFTWARE, under General Support and
Software.

• Under "Hardware", Choose other USB Flash Drives.

• Under "Now select your Product" on the right side, select the
model you have.

• Select Download File once you have determined the appropriate
Driver.

• When the download dialogue box appears, click on SAVE.

• Choose or create a folder on your computer's desktop in which
you want to save the downloaded driver. You will install the driver
from this folder after it has been downloaded.

• Once the download is complete, click on CLOSE and exit the
website.

d. Go to the folder where you saved the zip file. Using the winzip
program, unzip the file into the same folder. If winzip is not installed,
the trial version is available at www.winzip.com. Once the file have
been unzipped, double-click on the setup.exe application to begin the
installation.

• A Welcome dialogue box will pop up to give you the option of
installing the drivers. Click on NEXT.

• A Setup Status screen will appear confirming the installation
process has begun. Once completed, a "Restarting Windows"
dialogue box will appear.