Memmert WTB6 Product specification

Product specification
Waterbath
WTB6
Ideal for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segment
On this page, you can find all the essential technical data on the Memmert water bath. Our customer relations team will be pleased to help if you want further information. If you should require a customised special solution, please contact our technical specialists at sales@memmert.com.
Page 1/3 | 26.11.2020 | 26.11.2020
Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com
Memmert Waterbath WTB6 - en
Temperature
Working temperature range at least 5 above ambient to +100 (depending on ambient pressure) Setting temperature range +10 to +100 °C Setting accuracy
temperature
0.1 °C
Control of standard components
Controller intuitive 3.5" colour graphic display with touch screen
Safety
Temperature control Independent temperature limiter to switch off the heating in case of failure
Heating concept
Heating corrosion-proof large-area heating on the outside of the interior
Stainless steel interior
Interior Deep-drawn stainless steel tray (stainless steel W.St. 1-4301), without corners and edges for easy
cleaning incl. central drain (no disturbing installations)
Dimensions W x H x D in mm
Volume 7 l
w
x h
x d
(A)
: 277 x 150 x 217 mm
(C)
(B)
Textured stainless steel casing
Dimensions w
x h
x d
(D)
(E2)
: 349 x 328 x 289 mm
(F)
Electrical data
Voltage Electrical load
Voltage 230 V, 50/60 Hz Voltage
Electrical load
230 V, 50/60 Hz approx. 1000 W
115 V, 50/60 Hz approx. 1000 W
Ambient conditions
Installation The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all
sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.
Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing Overvoltage category II Pollution degree 2
Page 2/3 | 26.11.2020 | 26.11.2020
Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com
Loading...
+ 1 hidden pages