Meltric PN12c Catalog Page
PN12c Multipin Plugs & Receptacles – 7.5 A
Ratings
• Voltage
600 VAC Max/130 VDC
• Amperage Rating
2 A Current Interrupting
7.5 A Non-Current Interrupting
! PN12c is capable of handling
4-20mA low current applications
• Environmental Ratings
IP66/IP67 (Poly & Metal)
• Temperature Range
Min -40°F/ Max 140°F
See pg 258 for temps below -15°F.
• Wiring Capacity
Min 18 AWG Max 14 AWG
+
Does not apply to stainless steel
version.
Receptacle
(female)
+
Don’t forget to add installation
accessories to your order
!
Inlet
(male)
North American Congurations
Part # Part #
Voltage Polarity
600V
11P+G 03-A4001 07-A4001 07-A4001-SS 03-A8001 07-A8001 07-A8001-SS
Poly Metal
Stainless
Steel
Poly Metal
Stainless
Steel
Main Options
See pages 235-244 for detailed
information on these options
!
63
Reverse
Interiors
Flush Mount
(replaces female
casing)
Locking Pawl
Receptacle Options Suffix # Inlet Options Suffix #
Reverse Interiors Recept # - 001 Reverse Interiors Inlet # - 001
With Flush Mount (poly only)
Locking Pawl Recept # - 824-300
+
IP55 rating with Flush Mount casing
Order Example: 600V PN12c + Reverse Interiors
PN12c Receptacle 11P+G = 03-A4001-001
Recept # - 142
+
INSTALLATION ACCESSORIES – SIZE 1
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles. Stainless steel devices should use stainless steel accessories.
PN12c
HANDLE w/NPT Part # Poly Part # Metal
1/2” 511P0N05 591P0N05
Poly
HANDLESANGLES
3/4” 511P0N07 591P0N07
1” 511P0N10 591P0N10
Metal
For available cord grips, see pg 167.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
POLY 90° HANDLE w/NPT
1/2” 751P9N05
3/4” 751P9N07
1” 751P9N10
STAINLESS STEEL HANDLE w/NPT
1/2” 7X1P0N05
3/4” 7X1P0N07
For Stainless Steel
devices only.
1” 7X1P0N10
POLY HANDLE
POLY ANGLED HANDLE
Cable Range Part #
.350 - .520” 711P0BP6
.520 - .680” 711P0CP5
.680 - .980” 711P0DP4
.438 - .500” 791P0BS3
.500 - .562” 791P0BS4
.562 - .625” 791P0CS1
.625 - .750” 791P0CS4
.750 - .875” 791P0DS1
.875 - 1.000” 791P0DS3
For 1/2” NPT size, a hole size reducer is utilized.
.35 - .70” 511P0D18
.35 - .70” 511P6D18
POLY CONDUIT ENTRY w/NPT
30° 1/2” 511B3N05
BOXESMISCELLANEOUS ACCESSORIES
3
* 7.0 in
30° 3/4” 511B3N07
Part #
POLY WALL BOX w/NPT
0° 1/2” 511B0N05
3
* 3.4 in
0° 3/4” 511B0N07
METAL WALL BOX w/NPT
0° 1/2” 591B0N05
3
0° 3/4” 591B0N07
* 3.8 in
POLY WALL BOX w/ANGLE
70° 511C7000
3
* 82.0 in
Ground Bar 51AA089
METAL BOX w/NPT
0° 1/2” 7T1F0N05
0° 3/4” 7T1F0N07
0° 1” 7T1F0N10
0° 1 1/4” 7T1F0N12
POLY ANGLE WITH METAL BOX w/NPT
* 30.0 in
30°
30° 3/4” 711C3N07
30° 1” 711C3N10
3
30° 1 1/4” 711C3N12
1/2”
711C3N05
METAL ANGLE WITH METAL BOX w/NPT
* 27.0 in
45°
45° 3/4” 791C4N07
45° 1” 791C4N10
3
45° 1 1/4” 791C4N12
1/2”
791C4N05
STAINLESS STEEL BOX WITH STAINLESS STEEL ANGLE w/NPT
30° 3/4” 7X1C3N07
30° 1” 7X1C3N10
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
70° poly boxes are not
drilled. Contact customer
service if factory
drilled is required.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
* Includes angle
adapter as shown.
For Stainless Steel
devices only.
MULTIPIN
POLY ANGLE
MB Box 30° 511M3 70° 511M7
METAL ANGLE
0° 591M0
FS/FD Box 30° 791M3FS
45° 591M4
STAINLESS STEEL ANGLE
30° 7X1M4
* Base measures
approximately 4.2”
x 2.7”. Due to the
variation in sizes of FS
boxes, please verify that
your FS box matches
our dimensions, if not
call Customer Service
for other solutions.
For Stainless Steel
devices only.
PROTECTIVE INLET/PLUG CAP
01-NA426 For Inlets/Plugs Only.
FLUSH MOUNT
01-2A142
CORD GRIP with MESH
see pg 167
MULTI-CONTACT REMOVAL TOOL
61-CA593
CRIMPER TOOL (GREENLEE OR EQUAL)
4CN30
EUROPEAN CRIMPING TOOL
61-CA500
64
Loading...