
DXN60 Hazardous Location Plugs & Receptacles – 60 A
Devices rated for hazardous locations are not returnable.
cCSAus Certifications DXN60
• Max Amperage & Voltage
60 A, 600 VAC, 60 Hz
Current Interruption Capability
•
For current interrupting (AC)
• Horsepower Ratings
120V
1Ø 2 hp
240V
3Ø 7.5 hp
480V
3Ø 20 hp
600V
3Ø 20 hp
• Short Circuit Rating
25kA Close & Withstand
Testing was performed with RK1 100 A
fuse sized at 400% of the highest full
load motor ampacity associated with
the devices hp rating.
Note: Consult NEC for Short Circuit limits.
• Environmental Ratings
IP66/IP67
• Wiring Capacity
Min 10 AWG Max 4 AWG
Aux Contacts - Max 10 AWG
Based on THHN wire sizes
*
• Applicable Standards
CSA C22.2 No. 182.1
• Hazardous Location Ratings
-40°C ≤Ta ≤+60°C
Ex de IIC T4 Gb Ex tb IIIC T100°C Db
Class I Zone1 AEx de IIC T4 Gb
Zone 21 AEx tD T100°C Db
Class I Div 2 Gr A,B,C,D
Class II Div 2 Gr E,F,G
cCSAus 00.1144106X
Receptacle
(female)
Inlet
(male)
Standard DXN60 lid
opens to 120°
Receptacles & Inlets must
be mounted to a DXN handle,
!
angle or wall box
North American cCSAus Congurations
Voltage Polarity
120V
125V
208V
208V
208V
250V
250V
250V
277V
480V
480V
480V
600V
600V
600V
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts* Recept # - 972 With 2 Auxiliary/Pilot Contacts* Inlet # - 972
Padlock Pawl Recept # - 843 With No Lockout Hole Inlet # - A155
Metal Pawl on Poly Receptacle Recept # - 924
Closed Lid Configuration Recept # - R
180° Lid Opening Recept # - 180
1P+N+G 22-64165 22-68165
1P+N+G 22-64075 22-68075
2P+G 22-64162 22-68162
3P+G 22-64163 22-68163
3P+N+G 22-64167 22-68167
2P+G 22-64072 22-68072
3P+G 22-64073 22-68073
2P+N+G 22-64076 22-68076
1P+N+G 22-64045 22-68045
2P+G 22-64042 22-68042
3P+G 22-64043 22-68043
3P+N+G 22-64047 22-68047
2P+G 22-64142 22-68142
3P+G 22-64143 22-68143
3P+N+G 22-64147 22-68147
Part #
Poly
Not available with 600V devices, use -972-S74 for 550 VAC
*
.
Part #
Poly
ATEX/IECEx Certifications DXN6
• Max Amperage & Voltage
63 A, 750 VAC, 50 Hz
• Environmental IP66/IP67
• Ambient Temp -40°C to +60°C
• Hazardous Location Ratings
ATEX/IECEx Zones 1 & 2, 21 & 22
MARECHAL ELECTRIC MAROMME
II2 G/D Ex de IIC T*Gb
-40 °C ≤ TA ≤ +60 °C T4 T107 °C
-40 °C ≤ TA ≤ +40 °C T5 T87 °C
IECEx LCI 09.0007 / LCIE 05 ATEX 6150
See MELTRIC’s International Catalog
(online) for additional product information.
183
Ex tb IIIC T*Db
Receptacle
Inlet
IEC/CE Congurations (ATEX/IECEx)
Voltage Polarity
20 - 24 V
190 - 230 V
220 - 250 V
380 - 440 V
380 - 440 V
480 - 500 V
480 - 500 V
Receptacle Options Suffix # Receptacle Options Suffix #
Padlock Pawl w/shaft for 2 locks Recept # + 843 Self-returning Lid Recept # + R
180° Lid Opening Recept # + 10 180° Opening & Self-returning Lid Recept # + 18
With 2 Auxiliary/Pilot Contacts* Recept # + 972 Inlet # + 972
2P 25-6408A 25-6808A
3P+E 25-64033 25-68033
1P+N+E 25-64015 25-68015
3P+E 25-64013 25-68013
3P+N+E 25-64017 25-68017
3P+E 25-64093 25-68093
3P+N+E 25-64097 25-68097
Part #
Poly
Part #
Poly

INSTALLATION ACCESSORIES – SIZE 3
Accessories rated for hazardous locations are not returnable.
DXN60
DXN6
POLY HANDLE w/NPT Part #
1” 22-6A013-1
HANDLESHANDLES ANGLESANGLES
POLY HANDLE w/CORD GRIP w/Cable Range
.51 - .79” 253P0DPF
.71 - .98” 253P0DPE
POLY ANGLE
30° 22-6A027
FINGER DRAWPLATES
61-6A346
PROTECTIVE INLET/PLUG CAP
22-6A426 For Inlets/Plugs Only.
RECEPTACLE LOCKING PIN
LP-843
For use in Class I or II
Division 2 or Class 1
Zone 1 or Zone 21 depending on fitting used.
Fitting manufactured
by others.
For use in Class I or II
Division 2, Class I Zone I
or Zone 21.
-20°C ≤ Ta ≤ +85°C
Set of Two (2)
Recommended for cord to cord assembly
applications, for easier connector closure.
Requires Padlockable Pawl option (-843)
on receptacle.
POLY WALL BOX w/NPT Part #
NPT
BOXESBOXES
30° 1” 22-6A023-1-T
3
* 11.1 in
POLY WALL BOX w/NPT
30° 1” 22-6A023-1-B
3
NPT
*11.1 in
POLY ANGLE WITH METAL BOX w/NPT w/o TERMINAL BLOCKS
70° 1/2" 223C7N05
70° 3/4" 223C7N07
70° 1" 223C7N10
70° 1 1/4" 223C7N12
3
* 177.7 in
70° 1 1/2" 223C7N15
NPT on top or bottom (if rotated). For other NPT configurations,
contact customer service.
POLY WALL BOX 160x160 w/o TERMINAL BLOCKS w/CORD GRIP
70° 3/4" .35 - .63" 223C7CPD
70° 3/4" .51 - .71" 223C7CPC
70° 1" .51 - .79" 223C7DPF
70° 1" .71 - .98" 223C7DPE
3
* 179.4 in
70° 1 1/2" .79 - 1.02" 223C7M40PG
70° 1 1/2" .87 - 1.26" 223C7M40PH
NPT Thread on top.
* Interior volume with
receptacle installed.
NPT Thread on bottom.
* Interior volume with
receptacle installed.
NPT is drilled on top of
metal box as standard.
For NPT on side only,
add an “L” suffix.
To switch from top to
bottom or left to right
the box can be rotated.
* Interior volume with
receptacle installed.
For use in Class I or II
Division 2, Class I Zone I
or Zone 21
1 hole with a poly
cable gland.
MISCELLANEOUS ACCESSORIES
POLY HANDLE w/POLY Cable Gland Part #
10 - 14 mm 25-6A253-20P
12 - 18 mm 25-6A753
16 - 25 mm 25-6A253-32P
22 - 32 mm 25-6A253-40P
POLY HANDLE w/METAL Cable Gland
8 - 10 mm 25-6A253-20M
18 - 24 mm 25-6A253-32M
POLY ANGLE
30° 25-6A027
POLY ANGLE
70° 25-6A757
For use in Zones 1 & 2
Zones 21 & 22.
With Earth continuity.12 - 14 mm 25-6A253-25M
For panel mounting.
Not a replacement
part for 70° wall box.
POLY WALL BOX Part #
30° 12 - 18 mm 25-6AB53
POLY WALL BOX 160x160 w/o TERMINAL BLOCKS
70° 10 - 14 mm 25-6AB88-20P
70° 12 - 18 mm 25-6AB88-25P
70° 16 - 25 mm 25-6AB88-32P
70° 22 - 32 mm 25-6AB88-40P
POLY WALL BOX 160x160 w/16mm2 TERMINAL BLOCKS
70° 10 - 14 mm 25-6A088-20P
70° 12 - 18 mm 25-6A088-25P
70° 16 - 25 mm 25-6A088-32P
70° 22 - 32 mm 25-6A088-40P
1 hole with a poly
cable gland.
With 2 holes (1 with a
cable gland + 1 with a
stopping plug), with
2
8 + 2E 16 mm
blocks + 16 mm
wiring 6 - 16 mm
loop in loop out wiring
-40°C ≤ Ta ≤ +55°C T4 T105°C
-40°C ≤ Ta ≤ +50°C T5 T95°C
terminal
2
wires,
2
for
LOCATION
HAZARDOUS
18
4