Meltric DXN30 Accessories Catalog

Installation Accessories

DXN30

Handles

Cable Range Poly Handle w/Bushing

.31 - .51 22-3A013-20P

.51 - .75 22-3A013-25P

.67 - .98 22-3A013-32P

.95 - 1.26 22-3A013-40P

For Zone 1/ 21
applications

+

+

+

+

+

NPT Poly Handle w/NPT***

3/4” 22-3A013-34***

1” 22-3A013-1***

For use with Class I/II Division 2
or Zone 1/21 fittings

+ ATEX rated for use in Zone 1/21, not listed for Class I or II, Division 2.
*** or use in Class I or II, Division 2 or Zone 1/ 21 depending on fitting used. Fitting manufactured by others.

Angles

Wall Boxes

NPT

5.4 in

3+*

5.4 in

3+*

NPT

Nylon 30°
Angle

Poly 30° Poly 30° Poly 70°

NPT

Wall Box+ Wall Box++ Wall Box

81.9 in

NPT Guidelines

Cable Range NPT

.438 - .812 3/4”

NPT sizes are determined by the cable
diameter and third party cord grip.

Accessory Spotlight

3+*

Finger Drawplates

22-3A027

+

NPT thread on top

++

NPT thread on bottom

*

Interior volume with receptacle installed.

3/4” 22-3A023-34-T 22-3A023-34-B 22-3AB58

Miscellaneous Accessories

Set of Two (2)

Finger Protective
Drawplates Cap*

61-3A346 22-3A126

* For watertight seal, the male inlet must also be ordered with the ‘No Lockout Hole’ option (-A155).

For Male

Devices Only

Finger drawplates are recommended for
easier connector closure on cord to cord
assemblies.

Order Example

A typical order should include an inlet
part number, a receptacle part number
AND the matching handles, angles or
other required accessories.

Hazardous Location Plugs & Receptacles

Male Inlet with Handle (Plug)

22-38043 + 22-3A013-25P

Female Receptacle with Wall Box

22-34043 + 22-3A023-34-T

76