Meltric DXN25c, DXN37c Catalog Page
PRODUCT FEATURES
Locking Pin
Locking Provision
For insertion of locking pin
(or padlock) to prevent
inadvertent disconnection.
Recessed Contacts
Provides IP2X protection from
live electrical parts.
Metal Casing
Provides excellent durability
MULTIPIN
DXN25c/DXN37c
and protection.
Lid
Provides additional protection from
harsh environments.
Silver-Nickel Contacts
Silver-nickel contact material provides
superior conductivity, durability and
corrosion resistance.
Hazardous Location Listings
Spring-Loaded Butt-Style Contacts
Ensures optimal contact force and
superior electrical performance
over thousands of operations.
IP66/IP67 Watertightness
Environmental rating is achieved as
soon as the plug is latched to the
receptacle. There is no additional ring
to tighten.
Highlighted Feature
• Crimped Contacts
DXN25c / DXN37c devices now
feature contacts that can be crimped
or soldered. Each device is supplied
with 26 or 39 contacts so that
the product can be set up to suit
application needs.
227
ATEX
II 2 GD Ex e IIC Gb Ex tb IIIC Db
Suitable for Zone 1 & 2 (gas) 21 & 22 (dust)
Ex ia or ib IIC T6 Gb
DXN25c -40°C
DXN37c -40°C
≤ Ta ≤ +60°C T5 T71°C
-40°C ≤ Ta ≤ +40°C T6 T51°C
IECEx LCIE 14.0040X/LCIE 09 ATEX 3050X
≤ Ta ≤ +55°C T5 T76°C
-40°C ≤ Ta ≤ +40°C T6 T56°C
IECEx LCIE 14.0038X/LCIE 07 ATEX 6071X
Simple Assembly and Disassembly
DSN37c shown
Assembly
To insert contacts when they have been
wired is simple. Push wired contact into
rear of insulator until it stops to complete
the installation.
Disassembly
To remove, use the tool provided.
Push tool from front onto contact until tool stops.
Contact is then released at rear of insulator.
DXN25c
D
E
F
G
ØH
DXN37c
DXN25C/37C Hazardous Location Multipin – 10 A
Devices rated for hazardous locations are not returnable.
Ratings
Connector
(female recept w/handle)
Voltage Polarity
440V
440V
220V
220V
24P+G .47 - .825” 36-D3002-32M 36-D7002 36-D0002-32M
24P+G .63 - 1.063” 36-D3002 36-D7002 36-D0002
36P+G .47 - .825” 36-C3003-32M 36-C7003 36-C0003-32M
36P+G .63 - 1.063” 36-C3003 36-C7003 36-C0003
Cable Part # Part # Part #
Range Metal Metal Metal
Plug
(male inlet w/handle)
Voltage Polarity
Cable Part # Part # Part #
Range Metal Metal Metal
Receptacle/Angle
(female)
or
Inlet/Angle
(male)
or
Recept/Angle/Box
(female)
or
Inlet/Angle/Box
(male)
or
• Voltage
440 VAC or VDC DXN25c
230 VAC or VDC DXN37c
• Amperage Ratings
10 A DXN25c Not for disconnection
of a live circuit
10 A DXN37c Not for disconnection
of a live circuit
• Environmental Ratings
IP66/IP67
• Temperature Range
Min -40°F/Max 131°F – (DXN25c)
Min -40°F/Max 131°F – (DXN37c)
See pg 256 for temps below -15°F.
• Wiring Capacity
Min 16 AWG Max 14 AWG
Based on THHN wiring connection
*
type solder
• Terminal Type
DXN25c: Solder/Crimp
DXN37c: Solder/Crimp
• Applicable Standards
ATEX, IECEx
440V
440V
220V
220V
MULTI-CONTACT REMOVAL TOOL
PLUG CAP
ACCESSORIES
24P+G .47 - .825” 36-D1002-32M 36-D9002 36-D6002-32M
24P+G .63 - 1.063” 36-D1002 36-D9002 36-D6002
36P+G .47 - .825” 36-C1003-32M 36-C9003 36-C6003-32M
36P+G .63 - 1.063” 36-C1003 36-C9003 36-C6003
61-CA593
31-3A426
EUROPEAN CRIMPING TOOL
61-CA500
CRIMPER TOOL (Greenlee or equal)
4CN30
BAG OF 13 FEMALE CONTACTS
BAG OF 13 MALE CONTACTS
01-AA213
61-CA113
Includes insulation
sleeves and ferrules
Includes insulation
sleeves and ferrules
DXN25C/37C DIMENSIONS – Provided in inches
Dimensions are for reference only and may change depending on accessories used. For precise dimensions contact MELTRIC Engineering.
plug
A
C
wall box/angle/
receptacle/plug
B
PRODUCT
DXN25C/DXN37C 3.17 3.35 7.26 11.64 7.83 3.7 2.76 0.26
A B C D E F G øH
E
D
F
ØH
G
LOCATION
HAZARDOUS
228
Loading...