Meltric DXN20 Accessories Catalog

182

HAZARDOUS

LOCATION

*

Recommended for cord to cord assembly applications, for easier connector closure.

+

Requires Padlockable Pawl option (-843) on receptacle.

DXN20

Installation Accessories

Nylon 30°
Angle

.31 - .51 22-1A013-20P

+

.51 - .75 22-1A013-25P

+

.67 - .98 22-1A013-32P

+

Handles Angles

Miscellaneous Accessories

Wall Boxes

22-1A027

1/2” 22-1A023-12-T 22-1A023-12-B 22-1A058-12

3/4” 22-1A023-34-T 22-1A023-34-B 22-1A058-34

1” – – 22-1A058-1

1 1/4” – – 22-1A058-114

1 1/2” – – 22-1A058-112

Poly 30°* Poly 30°** Poly 70°***
Wall Box Wall Box Alum Wall Box

+

ATEX rated for use in Zone 1/21, not listed for Class I or II, Division 2.

***

For use in Class I or II, Division 2 or Zone 1 /21 depending on fitting used. Fitting manufactured by others.

NPT

Order Example

A typical order should include an inlet
part number, a receptacle part number
AND the matching handles, angles or
other required accessories.

Male Inlet with Handle (Plug)

22-18043 + 22-1A013-20P

Female Receptacle with Wall Box

22-14043 + 22-1A023-12-T

Cable Range Poly Handle w/Bushing

+

.393 - .551 22-1AB58

Cable Range

1/2” 22-1A013-12***

3/4” 22-1A013-34***

NPT Poly Handle w/NPT***

NPT Guidelines

NPT sizes are determined by the cable
diameter and third party cord grip.

Cable Range NPT

.312 - .625 1/2”

.438 - .812 3/4”

NPT

NPT

4.5 in

3+

4.5 in

3+

82.3 in

3+

For Zone 1/ 21
applications

For use with Class I/II
Division 2 or Zone 1/21
fittings

*

Set of Two (2)

For Male

Devices Only

Finger Protective Receptacle
Drawplates Cap Lockout Pin

61-1A346 22-1A426 LP-843

• HP ratings are based on
CSA certification

HP rated DXN20

DXN20 Horsepower Ratings

AMPS

VAC (Max) @ 60 Hz

Phases HP Rating

20 1Ø 1/4 hp
20 3Ø 1 hp
20 3Ø

3 hp

240V

120V

480V

NEW

Ratings

Accessory Spotlight

Receptacle Lockout Pin

A 5/16” lockout pin can be ordered to
securely lockout receptacles that include
the ‘padlockable pawl’ option. Alterna­tively the user can utilize a lock with a
5/16” shank. Locks with smaller shanks
will NOT securely lockout a receptacle pawl.

+

75.0 in

3+

++

Poly 70°
Wall Box

+

Interior volume with receptacle installed.

*

NPT thread on top.

++

Poly cord grip is located on the top of box.

**

NPT thread on bottom.

For bottom cord entry, rotate the box 180°.

***

NPT is drilled on top of aluminum box as standard. For NPT on side only, add an “L”

suffix. To switch from top to bottom or left to right the box can be rotated 180°.