Meltric DSN37c, DS37c Catalog Page
DSN37c/DS37c Multipin Plugs & Receptacles – 7.5 A
Poly
Devices
Only
Ratings
• Voltage
480 VAC Max/130 VDC
• Amperage Rating
2 A Current Interrupting
7.5 A Non-Current Interrupting
! DSN37c/DS37c is capable of
handling 4-20mA low current
applications
• Environmental Ratings
IP66/IP67 (Poly only)
IP54/IP55 (Stainless Steel)
• Temperature Range
Min -40°F/Max 140°F
See pg 258 for temps below -15°F.
• Wiring Capacity
Min 18 AWG Max 14 AWG
For DSN37c dimensions, see pgs 37-38.
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
480V
Receptacle
(female)
Inlet
(male)
North American Congurations
Part # Part #
Poly Stainless Steel Poly Stainless Steel
36P+G 63-C4003 37-C4003-SS 63-C8003 37-C8003-SS
Main Options
5/16”
hole
!
69
Padlock Pawl
Mushroom
Pawl
Self-Ejecting
Devices
Requires straight
*
insertion receptacle or inlet
and self-ejecting plug or
connector
See pages 235-244 for detailed
information on these options
Receptacle Options Suffix # Inlet Options Suffix #
Straight Insertion Recept # - 352 Self-Ejecting Plug Release Inlet # - 338
Self-Ejecting Connector Release Recept # - 354
Mushroom Pawl Recept # - 375
Padlock Pawl Recept # - 843
Padlockable Mushroom Pawl Recept # - 375-843
Closed Lid Configuration Recept # - NC
Order Example: 480V DSN37 + mushroom pawl
DSN37c 32P Poly receptacle = 63-C4003-375
INSTALLATION ACCESSORIES – SIZE 3
Poly
Poly
Devices
Devices
Only
Only
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles. Stainless steel devices should use stainless steel accessories.
DSN37c
DS37c
POLY HANDLE w/NPT
1/2” 513P0N05
HANDLESANGLES
3/4” 513P0N07
1” 513P0N10
1 1/4”
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
STAINLESS STEEL HANDLE w/NPT
3/4” 7X3P0N07
1” 7X3P0N10
For Stainless Steel
devices only.
POLY HANDLE
POLY HANDLE w/BUILT IN DRAW GRIPS
POLY HANDLE w/CLAMP & BUSHING
POLY ANGLE
1 1/4” 7X3P0N12
30° 513M3 70° 513M7
Part # Poly
513P0N12
Cable Range Part #
.520 - .680” 713P0CP5
.680 - .980” 713P0DP4
.980 - 1.260” 713P0EP4
.39 - 1.18” 513P0D30
.39 - 1.18” 513P0D30473
Makes connector closures easier.
.750 - .875” 713P0S14
.875 - 1.000” 713P0S16
1.000 - 1.125” 713P0S18
1.125 - 1.250” 713P0S20
1.250 - 1.375” 713P0S22
POLY CONDUIT ENTRY w/NPT
BOXES
30° 1/2” 513B3N05
30° 3/4” 513B3N07
3
30° 1” 513B3N10
* 8.5 in
Part #
POLY WALL BOX w/ANGLE
70° 513C7000
3
* 179.41 in
Ground Bar 51AA089
POLY ANGLE WITH METAL WALL BOX w/NPT
70° 1/2” 713C7N05
70° 3/4” 713C7N07
70° 1” 713C7N10
70° 1 1/4” 713C7N12
3
* 74.6 in
70° 1 1/2” 713C7N15
METAL BOX w/NPT
0°
0° 3/4” 7T1F0N07
0° 1” 7T1F0N10
0° 1 1/4” 7T1F0N12
1/2”
7T1F0N05
POLY ANGLE WITH METAL BOX w/NPT
* 30.2 in
30°
30° 3/4” 713C3N07
30° 1” 713C3N10
3
30° 1 1/4” 713C3N12
1/2”
713C3N05
STAINLESS STEEL BOX w/NPT
0° 1” 7X1F0N10
STAINLESS STEEL ANGLE W/STAINLESS STEEL BOX w/NPT
30° 1” 7X3C3N10
For poly devices only
* Interior volume with
receptacle installed.
70° poly boxes are not
drilled. Contact customer
service if factory drilled
is required.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
For metal angle,
replace “71” prefix
with “79”.
* Interior volume with
receptacle installed.
For Stainless Steel
devices only.
For Stainless Steel
devices only.
MULTIPIN
METAL ANGLE
0° 593M0
30° 593M3
FS/FD Box 30° 793M3FS
70° 593M7
STAINLESS STEEL ANGLE
30° 7X3M3
* Base measures
approximately 4.2” x
2.7”. Due to the variation
in sizes of FS box es,
please verify that your
FS box matches our
dimensions, if not call
Customer Service for
other solutions.
For Stainless Steel
devices only.
FINGER DRAWPLATES
61-6A346
PROTECTIVE INLET/PLUG CAP
61-6A426 For Inlets/Plugs Only.
PADLOCKABLE INLET/PLUG CAP
61-6A826 For Inlets/Plugs Only.
MULTI-CONTACT REMOVAL TOOL
MISCELLANEOUS ACCESSORIES
61-CA593
CRIMPER TOOL (GREENLEE OR EQUAL)
4CN30
EUROPEAN CRIMPING TOOL
61-CA500
Set of Two (2)
Recommended for cord to cord assembly
applications,for easier connector closure.
70
Loading...