Meltric DSN24c, DS24c Catalog Page
DSN24c/DS24c Multipin Plugs & Receptacles – 7.5 A
Poly
Devices
Only
Ratings
• Voltage
DSN24c
480 VAC Max/130 VDC
DS24c
250 VAC Max/130 VDC
• Amperage Rating
2 A Current Interrupting
7.5 A Non-Current Interrupting
! DSN24c/DS24c is capable of
handling 4-20mA low current
applications
• Environmental Ratings
IP66/IP67 (Poly only)
IP54/IP55 (Stainless Steel)
• Temperature Range
Min -40°F/Max 140°F
See pg 258 for temps below -15°F.
• Wiring Capacity
Min 18 AWG Max 14 AWG
For DSN24c dimensions, see pgs 37-38.
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
250V
480V
Receptacle
(female)
Inlet
(male)
North American Congurations
Part # Part #
Poly Stainless Steel Poly Stainless Steel
23P+G - 37-B4002-SS - 37-B8002-SS
23P+G 63-B4002 - 63-B8002 -
Main Options
5/16”
hole
!
67
Padlock Pawl
Mushroom
Pawl
Self-Ejecting
Devices
Requires straight
*
insertion receptacle or inlet
and self-ejecting plug or
connector
See pages 235-244 for detailed
information on these options
Receptacle Options Suffix # Inlet Options Suffix #
Straight Insertion Recept # - 352 Self-Ejecting Plug Release Inlet # - 338
Self-Ejecting Connector Release Recept # - 354
Mushroom Pawl Recept # - 375
Padlock Pawl Recept # - 843
Padlockable Mushroom Pawl Recept # - 375-843
Closed Lid Configuration Recept # - NC
Order Example: 480V DSN24c + mushroom pawl
DSN24c 22P Poly receptacle = 63-B4002-375
INSTALLATION ACCESSORIES – SIZE 2
Poly
Poly
Devices
Devices
Only
Only
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles. Stainless steel devices should use stainless steel accessories.
DSN24c
DS24c
HANDLE w/NPT
1/2” 512P0N05
HANDLESANGLES
3/4” 512P0N07
1” 512P0N10
1 1/4”
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
STAINLESS STEEL HANDLE w/NPT
3/4”
1” 7X2P0N10
For Stainless Steel
devices only.
POLY HANDLE
POLY HANDLE w/CLAMP & BUSHING
Part # Poly
512P0N12
Cable Range Part #
.350 - .520”
.520 - .680” 712P0CP5
.680 - .980” 712P0DP4
.980 - 1.260” 712P0EP4
.20 - .83”
.750 - .875”
.875 - 1.000” 712P0S16
1.000 - 1.125” 712P0S18
1.125 - 1.250” 712P0S20
1.250 - 1.375” 712P0S22
712P0BP6
7X2P0N07
512P0D21
712P0S14
POLY CONDUIT ENTRY w/NPT
BOXES
* 8.5 in
30° 1/2” 512B3N05
3
30° 3/4” 512B3N07
POLY WALL BOX w/ANGLE
70° 512C7000
3
* 82.0 in
Ground Bar 51AA089
POLY ANGLE WITH METAL WALL BOX w/NPT
70° 1/2” 712C7N05
70° 3/4” 712C7N07
70° 1” 712C7N10
* 74.6 in
3
70° 1 1/4” 712C7N12
70° 1 1/2” 712C7N15
METAL BOX w/NPT
0°
0° 3/4” 7T1F0N07
0° 1” 7T1F0N10
0° 1 1/4” 7T1F0N12
1/2”
POLY ANGLE WITH METAL BOX w/NPT
* 30.2 in
30°
30° 3/4” 712C3N07
30° 1” 712C3N10
3
30° 1 1/4” 712C3N12
1/2”
STAINLESS STEEL BOX w/NPT
0° 1” 7X1F0N10
Part #
7T1F0N05
712C3N05
For poly devices only
* Interior volume with
receptacle installed.
70° poly boxes are not
drilled. Contact customer
service if factory drilled
is required.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
For metal angle,
replace “71” prefix
with “79”.
* Interior volume with
receptacle installed.
For Stainless Steel
devices only.
MULTIPIN
POLY ANGLE
30° 512M3 70° 512M7
METAL ANGLE
0° 592M0
30° 592M3
FS/FD Box 30° 792M3FS
STAINLESS STEEL ANGLE
30° 7X2M3
* Base measures
approximately 4.2” x
2.7”. Due to the variation
in sizes of FS box es,
please verify that your
FS box matches our
dimensions, if not call
Customer Service for
other solutions.
STAINLESS STEEL ANGLE W/STAINLESS STEEL BOX w/NPT
30° 3/4” 7X2C3N07
30° 1” 7X2C3N10
FINGER DRAWPLATES
61-3A346
Set of Two (2)
Recommended for cord to cord assembly
applications,for easier connector closure.
PROTECTIVE INLET/PLUG CAP
61-3A426 For Inlets/Plugs Only.
PADLOCKABLE INLET/PLUG CAP
61-3A826 For Inlets/Plugs Only.
MULTI-CONTACT REMOVAL TOOL
MISCELLANEOUS ACCESSORIES
61-CA593
CRIMPER TOOL (GREENLEE OR EQUAL)
4CN30
EUROPEAN CRIMPING TOOL
61-CA500
For Stainless Steel
devices only.
68
Loading...