Meltric DSN24c, DS24c Accessories Catalog
Installation Accessories
Poly
Devices
Only
Stainless Steel accessories are for Stainless Steel devices only.
Handles
Stainless Steel
Handle
DSN24c
DS24c
NPT Cable Range
1/2” 61-3A013-12 – .20 - .83 – 61-3A013
3/4” 61-3A013-34 1H34SS .750 - .875 1PM514 –
1” 61-3A013-1 1H1SS .875 - 1.000 1PM516 –
1 1/4” 61-3A013-114 – 1.000 - 1.125 1PM518 –
Notes: • Finger draw plates are recommended for easier connector closure on cord to cord assemblies.
• For available cord grips see pgs 169-170.
Poly Stainless Poly Handle Nylon
Handle Steel Handle w/Clamp & Bushing Handle
1.125 - 1.250 1PM520 –
1.250 - 1.375 1PM522 –
Angles
Nylon 30° Metal 30° Metal Angle Metal Straight Stainless Steel
Angle Angle FS/FD Box 30° Adapter 30°Angle
61-3A027 MA2 MAFS2* MS2 MA2SS
MAFS2 base measures approximately 4.2” x 2.7”. Due to the variation in sizes of FS boxes, please verify
*
that your FS box matches our dimensions, if not call Customer Service for other solutions.
Junction Boxes
NPT Guidelines
Cable Range NPT
.312 - .625 1/2”
.438 - .812 3/4”
.660 - 1.000 1”
.875 - 1.375 1 1/4”
NPT sizes are determined by the cable
diameter and third party cord grip.
MULTIPIN
3+
30.2 in
NPT
1/2” MB312 61-3A053-080-12 – 61-3A023-12 51-BA058 59-BA058-12 –
3/4” MB334 61-3A053-080-34 – 61-3A023-34 51-BA058 59-BA058-34 –
1” MB31 61-3A053-080-1 39-1A053-080-SS-1 – 51-BA058 59-BA058-1 MB31SS
1 1/4” MB3114 61-3A053-080-114 – – 51-BA058 59-BA058-114 –
1 1/2” – – – – – 59-BA058-112 –
For poly devices only.
*
70° boxes are not drilled. Contact customer service if factory drilling is required.
**
Metal Metal Box with Stainless Steel Box*** Poly* Poly 70°** Poly 70° Stainless Steel
Box Nylon Angle w/Stainless Steel Angle Conduit Entry Wall Box Alum Wall Box Box
51.3 in
3+
Includes angle adapter as shown.
***
+
Interior volume with receptacle installed.
8.5 in
3+
85.0 in
3+
75.0 in
3+
Miscellaneous Accessories
Set of Two (2)
*
Finger Protective Padlockable Receptacle Multi-Contact Crimper Tool European
Drawplates Cap Plug Cap Lockout Pin Removal Tool (Greenlee or equal) Crimping Tool
61-3A346 61-3A426 61-3A826 LP-843 9-LD12-37 4CN30 61-CA500
Recommended for cord to cord assembly applications, for easier connector closure.
*
+
Requires Padlockable Pawl option (-843) on receptacle.
For Male
Devices Only
For Male
Devices Only
+
78
Loading...