Meltric DS60 Catalog Page
DS60 Switch-Rated Plugs & Receptacles – 60 A
UL/CSA Ratings
• Max Amperage & Voltage
60 A, 600 VAC
• Switch-Rating (AC Only)
Branch Circuit & Motor Circuit
Disconnect Switching
• Horsepower Ratings
1Ø 3 hp
120V
240V
1Ø 5 hp
208V
3Ø 10 hp
240V
3Ø 10 hp
480V
3Ø 25 hp
600V
3Ø 25 hp
• Short Circuit Rating
100kA Close & Withstand
Tested with RK1 current limiting
fuses sized at 400% of the highest
full load motor ampacity.
• Environmental Ratings
Type 3R (Standard)
Type 4X (Optional)
• Temperature Range
Min -40°F/Max 140°F
See pg 258 for temps below -15°F.
• Wiring Capacity
Min 10 AWG Max 2 AWG
Aux Contacts - Max 14 AWG
Based on THHN wire sizes
• Certifications
UL 2682, UL 1682, CSA 182.1
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
120V
120 208V
125V
125 250V
208V
208V
250V
250V
277V
277 480V
347 600V
480V
480V
600V
600V
1P+N+G 33-64165 37-64165 33-68165 37-68165
3P+N+G 33-64167 37-64167 33-68167 37-68167
1P+N+G 33-64075 37-64075 33-68075 37-68075
2P+N+G 33-64076 37-64076 33-68076 37-68076
1P+N+G 33-64045 37-64045 33-68045 37-68045
3P+N+G 33-64047 37-64047 33-68047 37-68047
3P+N+G 33-64147 37-64147 33-68147 37-68147
Receptacle
(female)
Inlet
(male)
North American UL/CSA Congurations
Part # Part #
Poly Metal Poly Metal
2P+G 33-64162 37-64162 33-68162 37-68162
3P+G 33-64163 37-64163 33-68163 37-68163
2P+G 33-64072 37-64072 33-68072 37-68072
3P+G 33-64073 37-64073 33-68073 37-68073
2P+G 33-64042 37-64042 33-68042 37-68042
3P+G 33-64043 37-64043 33-68043 37-68043
2P+G 33-64142 37-64142 33-68142 37-68142
3P+G 33-64143 37-64143 33-68143 37-68143
Main Options
5/16”
hole
See pages 235-244 for detailed
information on these options
!
45
Auxiliary/Pilot
Contacts
Mushroom
Pawl
Padlock Pawl
Closed Lid
Configuration
Recommended for cord
applications to keep lid
tucked in to avoid damage.
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts
With 3 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
Type 4X & Closed Lid Configuration
Straight Insertion
Self-Ejecting Connector Release
Mushroom Pawl
Padlock Pawl
Padlockable Mushroom Pawl
Screw-Type Locking Pawl
Metal Pawl (on Poly Receptacle)
With Auxiliary Switch
180° Opening Lid (metal only)
Notes: + Not UL/CSA listed.
++
Required when mating to rigid mounted male inlet.
Recept # - 972
Recept # - 263
Recept # - 264
Recept # - 4X
Recept # - 352
Recept # - 354
Recept # - 375
Recept # - 843
Recept # - 375-843
Recept # - 845
Recept # - 824
Recept # - 270+
Recept # - 180++
With 2 Auxiliary/Pilot Contacts
With 3 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
Type 4X Watertightness
Self-Ejecting Plug Release
With No Lockout Hole
For Auxiliary Switch
Notes: * Order inlet with P+N+G configuration and receptacle
with P+G configuration.
Order Example: 480V DS60 + 2 auxiliary contacts
DS60 Poly inlet 3P+G = 33-68043-972
Inlet # - 972
Inlet # - 263
Inlet # - 264
Inlet # - 4X
Inlet # - 338
Inlet # - A155
Inlet # - NNF*
INSTALLATION ACCESSORIES – SIZE 4
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles.
HANDLE w/NPT
1/2” 514P0N05 594P0N05
HANDLESANGLES
For metal devices only
3/4” 514P0N07 594P0N07
1” 514P0N10 594P0N10
1 1/4” 514P0N12 594P0N12
1 1/2” 514P0N15 594P0N15
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
For metal devices only
POLY HANDLE
POLY HANDLE w/BUILT IN DRAW GRIPS
POLY HANDLE w/CLAMP & BUSHING
POLY ANGLE
Part # Poly Part # Metal
Cable Range Part #
.680 - .980” 714P0DP4
.980 - 1.260” 714P0EP4
1.260 - 1.560" 714P0FP1
.750 - .875" 794P0DS1
.875 - 1.000" 794P0DS3
1.000 - 1.125" 794P0ES2
1.250 - 1.375"
1.438 - 1.562" 794P0FS2*
1.562 - 1.688" 794P0FS3*
*May require stripping of cable jacket.
.51 - 1.38” 514P0D35
.51 - 1.38” 514P0D35473
Makes connector closures easier.
1.250 - 1.375” 714P0S22
1.438 - 1.562” 714P0S25
1.562 - 1.688” 714P0S27
1.688 - 1.812” 714P0S29
794P0FS1
POLY CONDUIT ENTRY w/NPT
BOXES
* 27.7 in
30° 1/2” 514B3N05
30° 3/4” 514B3N07
30° 1” 514B3N10
3
30° 1 1/4” 514B3N12
POLY WALL BOX w/ANGLE
70° 514C7000
3
* 181.24 in
POLY ANGLE WITH METAL BOX w/NPT
70° 1/2” 714C7N05
70° 3/4” 714C7N07
70° 1” 714C7N10
70° 1 1/4” 714C7N12
3
* 177.7 in
70° 1 1/2” 714C7N15
METAL BOX w/NPT
0°
0° 1 1/4” 7T4F0N12
0° 1 1/2” 7T4F0N15
0° 2” 7T4F0N20
POLY ANGLE WITH METAL BOX w/NPT
30°
30° 1 1/4” 714C3N12
30° 1 1/2” 714C3N15
* 61.0 in3 Poly Angle
3
Metal Angle
* 59.4 in
30° 2” 714C3N20
FINGER DRAWPLATES
31-6A346
PROTECTIVE INLET/PLUG CAP
Ground Bar 51AA089
1”
1”
Set of Two (2)
Recommended for cord to cord assembly applications,
for easier connector closure.
Part #
7T4F0N10
714C3N10
DS60
For poly devices only
* Interior volume with
receptacle installed.
70° poly boxes are
not drilled. Contact
customer service if
factory drilling is
required.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
For metal angle,
replace “71” prefix
with “79”.
* Interior volume with
receptacle installed.
DS
METAL ANGLE
30° 514M3 70° 514M7
0° 594M0
30° 594M3
30° 794M3L
Oversized 30° 794M3
70° 594M7
Mounts on oversize box
only. Order with 7T5F0Nxx.
See pg 50.
31-6A426 For Inlets/Plugs Only.
PADLOCKABLE INLET/PLUG CAP
DS6PC Poly – For Inlets/Plugs Only.
MISCELLANEOUS ACCESSORIES
DS6MC
Aluminum – For Inlets/Plugs Only.
-A155 suffix required to maintain water ingress protection.
SPRING-LOADED PADLOCKABLE INLET/PLUG CAP
31-6A226 For Poly Inlets/Plugs Only.
39-6A226 For Metal Inlets/Plugs Only.
RECEPTACLE LOCKING PIN
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
-A155 suffix required to
maintain water ingress
protection.
46
Loading...