Meltric DS200 Catalog Page
DS200 Switch-Rated Plugs & Receptacles – 200 A
UL/CSA Ratings
• Max Amperage & Voltage
200 A, 600 VAC
• Switch-Rating (AC Only)
Branch Circuit & Motor Circuit
Disconnect Switching
• Horsepower Ratings
3Ø 40 hp
208V
240V
3Ø 40 hp
480V
3Ø 100 hp
600V
3Ø 100 hp
• Short Circuit Rating
65kA Close & Withstand
Testing was performed with RK5
time delay fuses sized at 100% of
the devices rated ampacity.
10kA Close & Withstand
Testing was performed with RK1
current limiting fuses sized at 400%
of the highest full load motor
ampacity.
• Environmental Ratings
Type 3R (Standard)
Type 4X (Optional)
• Temperature Range
Min -40°F/Max 140°F
See pg 258 for temps below -15°F.
• Wiring Capacity
Min 4 AWG Max 4/0 AWG
Aux Contacts - Max 14 AWG
Based on THHN wire sizes
• Certifications
UL 2682, UL 1682, CSA 182.1
If you have an existing removable and/or
!
permanently attached drawbar, contact
customer service.
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
120V
120 208V
125V
125 250V
208V
208V
250V
250V
277V
277 480V
347 600V
480V
480V
600V
600V
1P+N+G 37-24165 37-28165
3P+N+G 37-24167 37-28167
1P+N+G 37-24075 37-28075
2P+N+G 37-24076 37-28076
2P+G 37-24162 37-28162
3P+G 37-24163 37-28163
2P+G 37-24072 37-28072
3P+G 37-24073 37-28073
1P+N+G 37-24045 37-28045
3P+N+G 37-24047 37-28047
3P+N+G 37-24147 37-28147
2P+G 37-24042 37-28042
3P+G 37-24043 37-28043
2P+G 37-24142 37-28142
3P+G 37-24143 37-28143
Receptacle
(female)
Easy Closing
Mechanism
Standard DS200 lid
opens to 90°
North American UL/CSA Congurations
Part # Part #
Metal Metal
Inlet
(male)
Tabs for latching to
closing mechanism
Main Options
5/16”
hole
See pages 235-244 for detailed
information on these options
!
51
Auxiliary/Pilot
Contacts
Mushroom
Pawl
Padlock Pawl
Closed Lid
Configuration
Recommended for cord
applications to keep lid
tucked in to avoid damage.
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
With 6 Auxiliary/Pilot Contacts
Type 4X & Closed Lid Configuration
Straight Insertion
Mushroom Pawl
Padlock Pawl
Padlockable Mushroom Pawl
Screw-Type Locking Pawl
180° Opening Lid
Closed Lid Configuration
With Auxiliary Switch
Notes: * Customers needing to maintain compatiblity with old style
-172 auxiliary contacts should use a -172 suffix.
+
This option not available with N contact.
++
Not UL/CSA listed.
+++
Required when mating to rigid mounted male inlet.
Recept # - 972*
Recept # - 174+
Recept # - 976+
Recept # - 4X
Recept # - A188++
Recept # - 375
Recept # - 843
Recept # - 375-843
Recept # - 845
Recept # - 180+++
Recept # - NC
Recept # - 270++
With 2 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
With 6 Auxiliary/Pilot Contacts
Type 4X Watertightness
Self-Ejecting Plug Release
For Auxiliary Switch
With No Lockout Hole
Notes: * Customers needing to maintain compatiblity with old style -172
auxiliary contacts should use a -172 suffix.
** Order inlet with P+N+G configuration and receptacle with
P+G configuration.
+
This option not available with N contact.
++
Not UL/CSA listed.
Order Example: 480V DS200 + 2 auxiliary contacts
DS200 Metal inlet 3P+G = 37-28043-972
Inlet # - 972*
Inlet # - 174+
Inlet # - 976+
Inlet # - 4X
Inlet # - 338-A188++
Inlet # - NNF**
Inlet # - A155
INSTALLATION ACCESSORIES – SIZE 6
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles.
DS200
HANDLE w/NPT
1” 516P0N10 596P0N10
Poly
HANDLES
For metal devices only
1 1/4” 516P0N12 596P0N12
1 1/2” 516P0N15 596P0N15
2” 516P0N20 596P0N20
2 1/2” 516P0N25 596P0N25
Metal
3” - 596P0N30
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
METAL OVERSIZED HANDLE w/NPT
1 1/2”
2”
2 1/2”
For metal devices only
3”
3"
For available cord grips, see page 167.
SANTOPRENE HANDLE
IP66/IP67
METAL ANGLE
ANGLES
0° 596M0
Part # Poly Part # Metal
Cable Range Part #
1.520 - 1.860" 716P0GP2
1.850 - 2.190" 716P0GP3*
*May require stripping of cable jacket.
1.688 - 1.812" 796P0GS1
1.812 - 1.938" 796P0GS2*
1.938 - 2.062" 796P0JS1
2.062 - 2.188" 796P0JS2
2.188 - 2.312" 796P0JS3
2.312 - 2.438" 796P0JS4*
2.437 - 2.625" 796P0KS1
2.625 - 2.812" 796P0KS2
*May require stripping of cable jacket.
796P0N12
796P0N15
796P0N20
796P0N25
796P0N30
.984 - 1.378” 556P0D35
1.378 - 1.772” 556P0D45
1.772 - 1.929” 556P0D49
METAL ANGLE WITH METAL BOX w/NPT
BOXES
* 248.4 in
METAL BOX w/NPT
METAL OVERSIZED BOX w/NPT
60° 1 1/2” 796C6N15
60° 2” 796C6N20
3
60° 2 1/2” 796C6N25
0° 1 1/2” 7T6F0N15
0° 2” 7T6F0N20
0° 2 1/2” 7T6F0N25
0° 2" 7T6F0N20XL
0° 2 1/2” 7T6F0N25XL
0° 3" 7T6F0N30XL
Part #
NPT on top or bottom (if rotated). For other NPT configurations, contact customer service.
PROTECTIVE INLET/PLUG CAP
Covers lockout hole for watertight seal on inlet.
39-2A426
PADLOCKABLE INLET/PLUG CAP
DS2MC
CORD GRIP with MESH
Consult Customer Service for availability.
For Inlets/Plugs Only.
Aluminum – For Inlets/Plugs Only.
-A155 suffix required to maintain water ingress protection.
* Interior volume with
DS
receptacle installed.
* Interior volume with
receptacle installed.
Oversized 45° 796M4
60° 596M6
Extended 60° 597M6
Mounts on oversize
metal box only. Order
with 7T6F0N25XL.
see pg 167
MISCELLANEOUS ACCESSORIES
EASY RETROFIT ADAPTER PLATES
see pg 164 Mount to existing boxes.
RECEPTACLE LOCKING PIN
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
52
Loading...