DS100C Switch-Rated Plugs & Receptacles – 100 A
UL/CSA Ratings
• Max Amperage & Voltage
100 A, 600 VAC
• Switch-Ratings (AC Only)
Branch Circuit & Motor Circuit
Disconnect Switching
• Horsepower Ratings
1Ø 5 hp
120V
240V
1Ø 10 hp
208V
3Ø 20 hp
240V
3Ø 20 hp
480V
3Ø 50 hp
600V
3Ø 50 hp
• Short Circuit Rating
100kA Close & Withstand
Tested with RK1 current limiting
fuses sized at 400% of the highest
full load motor ampacity.
• Environmental Ratings
Type 3R (Standard)
Type 4X (Optional)
• Temperature Range
Min -40°F/Max 140°F
for temps below -15°F.
See pg 258
• Wiring Capacity
Min 10 AWG Max 2 AWG
Aux Contacts - Max 14 AWG
Based on THHN wire sizes
• Certifications
UL 2682, UL 1682, CSA 182.1
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
120V
120 208V
125V
125 250V
208V
208V
250V
250V
277V
277 480V
347 600V
480V
480V
600V
600V
1P+N+G 33-64235-C-K16 37-64235-C-K16 33-68235-C-K16 37-68235-C-K16
3P+N+G 33-64237-C-K16 37-64237-C-K16 33-68237-C-K16 37-68237-C-K16
1P+N+G 33-64175-C-K07 37-64175-C-K07 33-68175-C-K07 37-68175-C-K07
2P+N+G 33-64176-C-K07 37-64176-C-K07 33-68176-C-K07 37-68176-C-K07
1P+N+G 33-64245-C-K04 37-64245-C-K04 33-68245-C-K04 37-68245-C-K04
3P+N+G 33-64247-C-K04 37-64247-C-K04 33-68247-C-K04 37-68247-C-K04
3P+N+G 33-64187-C-K14 37-64187-C-K14 33-68187-C-K14 37-68187-C-K14
Receptacle
(female)
Inlet
(male)
North American UL/CSA Congurations
Part # Part #
Poly Metal Poly Metal
2P+G 33-64232-C-K16 37-64232-C-K16 33-68232-C-K16 37-68232-C-K16
3P+G 33-64233-C-K16 37-64233-C-K16 33-68233-C-K16 37-68233-C-K16
2P+G 33-64172-C-K07 37-64172-C-K07 33-68172-C-K07 37-68172-C-K07
3P+G 33-64173-C-K07 37-64173-C-K07 33-68173-C-K07 37-68173-C-K07
2P+G 33-64242-C-K04 37-64242-C-K04 33-68242-C-K04 37-68242-C-K04
3P+G 33-64243-C-K04 37-64243-C-K04 33-68243-C-K04 37-68243-C-K04
2P+G 33-64182-C-K14 37-64182-C-K14 33-68182-C-K14 37-68182-C-K14
3P+G 33-64183-C-K14 37-64183-C-K14 33-68183-C-K14 37-68183-C-K14
Main Options
5/16”
hole
See pages 235-244 for detailed
information on these options
!
47
Auxiliary/Pilot
Contacts
Mushroom
Pawl
Padlock Pawl
Closed Lid
Configuration
Recommended for cord
applications to keep lid
tucked in to avoid damage.
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts
With 3 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
Type 4X & Closed Lid Configuration
Straight Insertion
Self-Ejecting Connector Release
Mushroom Pawl
Padlock Pawl
Padlockable Mushroom Pawl
Screw-Type Locking Pawl
Metal Pawl (on Poly Receptacle)
Closed Lid Configuration
With Auxiliary Switch
180° Opening Lid (metal only)
Notes: + Not UL/CSA listed.
++
Required when mating to rigid mounted male inlet.
Recept # - 972
Recept # - 263
Recept # - 264
Recept # - 4X
Recept # - 352
Recept # - 354
Recept # - 375
Recept # - 843
Recept # - 375-843
Recept # - 845
Recept # - 824
Recept # - NC
Recept # - 270+
Recept # - 180++
With 2 Auxiliary/Pilot Contacts
With 3 Auxiliary/Pilot Contacts
With 4 Auxiliary/Pilot Contacts
Type 4X Watertightness
Self-Ejecting Plug Release
With No Lockout Hole
For Auxiliary Switch
Notes: * Order inlet with P+N+G configuration and receptacle with
P+G configuration.
Order Example: 480V DS100C + 2 auxiliary contacts
DS100C Poly inlet 3P+G = 33-68243-C-K04-972
Inlet # - 972
Inlet # - 263
Inlet # - 264
Inlet # - 4X
Inlet # - 338
Inlet # - A155
Inlet # - NNF*
INSTALLATION ACCESSORIES – SIZE 4
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles.
DS100C
HANDLE w/NPT
1/2” 514P0N05 594P0N05
Poly
HANDLESANGLES
For metal devices only
3/4” 514P0N07 594P0N07
1” 514P0N10 594P0N10
Metal
1 1/4” 514P0N12 594P0N12
1 1/2” 514P0N15 594P0N15
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
For metal devices only
POLY HANDLE
POLY HANDLE w/BUILT IN DRAW GRIPS
POLY HANDLE w/CLAMP & BUSHING
POLY ANGLE
30° 514M3 70° 514M7
METAL ANGLE
0° 594M0
30° 594M3
30° 794M3L
Oversized 30° 794M3
Part # Poly Part # Metal
Cable Range Part #
.680 - .980" 714P0DP4
.980 - 1.260" 714P0EP4
1.260 - 1.560" 714P0FP1
.750 - .875" 794P0DS1
.875 - 1.000" 794P0DS3
1.000 - 1.125" 794P0ES2
1.250 - 1.375"
1.438 - 1.562" 794P0FS2*
1.562 - 1.688" 794P0FS3*
*May require stripping of cable jacket.
.51 - 1.38” 514P0D35
.51 - 1.38” 514P0D35473
Makes connector closures easier.
1.250 - 1.375” 714P0S22
1.438 - 1.562” 714P0S25
1.562 - 1.688” 714P0S27
1.688 - 1.812” 714P0S29
794P0FS1
Mounts on oversize box
only. Order with 7T5F0Nxx.
See pg 50.
POLY CONDUIT ENTRY w/NPT
BOXESMISCELLANEOUS ACCESSORIES
* 27.7 in
30° 1/2” 514B3N05
30° 3/4” 514B3N07
30° 1” 514B3N10
3
30° 1 1/4” 514B3N12
POLY WALL BOX w/ANGLE
70° 514C7000
3
* 181.24 in
Ground Bar 51AA089
POLY ANGLE WITH METAL BOX w/NPT
70° 1/2” 714C7N05
70° 3/4” 714C7N07
70° 1” 714C7N10
70° 1 1/4” 714C7N12
3
* 177.7 in
70° 1 1/2” 714C7N15
METAL BOX w/NPT
0°
0° 1 1/4” 7T4F0N12
0° 1 1/2” 7T4F0N15
0° 2” 7T4F0N20
1”
POLY ANGLE WITH METAL BOX w/NPT
* 61.0 in3 Poly Angle
3
Metal Angle
* 59.4 in
30°
30° 1 1/4” 714C3N12
30° 1 1/2” 714C3N15
30° 2” 714C3N20
1”
FINGER DRAWPLATES
31-6A346
Set of Two (2)
Recommended for cord to cord assembly applications,
for easier connector closure.
PROTECTIVE INLET/PLUG CAP
31-6A426 For Inlets/Plugs Only.
PADLOCKABLE INLET/PLUG CAP
DS6PC Poly – For Inlets/Plugs Only.
DS6MC
Aluminum – For Inlets/Plugs Only.
-A155 suffix required to maintain water ingress protection.
SPRING-LOADED PADLOCKABLE INLET/PLUG CAP
31-6A226 For Poly Inlets/Plugs Only.
39-6A226 For Metal Inlets/Plugs Only.
RECEPTACLE LOCKING PIN
Part #
7T4F0N10
714C3N10
For poly devices only
* Interior volume with
receptacle installed.
70° poly boxes are
not drilled. Contact
customer service if
factory drilling is
required.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
For metal angle,
replace “71” prefix
with “79”.
* Interior volume with
receptacle installed.
-A155 suffix required to
maintain water ingress
protection.
DS
70° 594M7
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
48
Loading...