Meltric DS100 Catalog Page
DS100
DECONTACTOR™– 100A
Switch Rated Plugs & Receptacles
Ratings
• Voltage
600 VAC, 250 VDC
• Switch Rating (AC Only)
Branch Circuit
Disconnect Switching
• Short Circuit Rating
65kA Close & Withstand
Testing was performed with RK5
time delay fuses sized at 100% of
the devices rated ampacity.
• Environmental Ratings
NEMA 3R, IP54/55*
*IP54 when the plug & receptacle are
ated. IP55 on the receptacle alone
m
hen the lid is latched closed.
w
• Temperature Range
Min -40°F/Max 140°F
See pg 194 for temps below -15°F.
• Wiring Capacity
Min 4 AWG Max 2/ 0 AWG*
Aux Contacts - Max 14 AWG
Is available upon request by adding
*
suffix “E323” to the inlet or receptacle.
• Listings
UL, CSA, IEC, CE*
*Contact Customer Service
Receptacle (female) Inlet (male)
Standard DS100
id opens to 90°
on’t forget to
D
dd installation
a
accessories to
our order
y
Voltage Polarity Part # Voltage Polarity Part #
Voltage Polarity Voltage Polarity
120/208V
120/208V 120/208V
125V
1
25/250V
208V
208V
250V
250V
277V
277/480V
347/600V
480V
480V
600V
600V
Other voltage configurations are available – contact customer service at 800.433.7642.
3P+N+E 33-94167 37-94167 3P+N+E 33-98167 37-98167
1P+N+E 33-94075 37-94075 1P+N+E 33-98075 37-98075
2P+N+E 33-94076 37-94076 2P+N+E 33-98076 37-98076
2P+E 33-94162 37-94162 2P+E 33-98162 37-98162
3P+E 33-94163 37-94163 3P+E 33-98163 37-98163
2P+E 33-94072 37-94072 2P+E 33-98072 37-98072
3P+E 33-94073 37-94073 3P+E 33-98073 37-98073
1P+N+E 33-94045 37-94045 1P+N+E 33-98045 37-98045
3P+N+E 33-94047 37-94047 3P+N+E 33-98047 37-98047
3P+N+E 33-94147 37-94147 3P+N+E 33-98147 37-98147
2P+E 33-94042 37-94042 2P+E 33-98042 37-98042
3P+E 33-94043 37-94043 3P+E 33-98043 37-98043
2P+E
3P+E 33-94143 37-94143 3P+E 33-98143 37-98143
l
Part # Part #
Poly Metal Poly Metal
Poly Metal Poly Metal
120/208V
125V
1
25/250V
208V
208V
250V
250V
277V
277/480V
347/600V
480V
480V
33-94142 37-94142 2P+E 33-98142 37-98142
600V
600V
Main Options
Main Options
Series Switch Rated Plugs & Receptacles
TM
See pgs 171-180 for detailed
information on these options
DECONTACTOR
43
Auxiliary/Pilot
Contacts
gency
Emer
Stop Pawl
Padlockable
Mushroom
Pawl
Self-Ejecting
Devices
* Requires straight
insertion receptacle
inlet and self-ejecting
plug or connector
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts Recept # - 172 With 2 Auxiliary/Pilot Contacts Inlet # - 172
With 3 Auxiliary/Pilot Contacts Recept # - 173
/Pilot Contacts Recept # - 174
ith 4 Auxiliar
W
y
With 5 Auxiliary/Pilot Contacts Recept # - 175
+
+
+
With 3 Auxiliary/Pilot Contacts Inlet # - 173
/Pilot Contacts Inlet # - 174
ith 4 Auxiliar
W
y
With 5 Auxiliary/Pilot Contacts Inlet # - 175
+
+
+
LP Watertightness (low pressure) Recept # - LP LP Watertightness (low pressure) Inlet # - LP
HP Watertightness (high pressure) Recept # - HP HP Watertightness (high pressure) Inlet # - HP
Straight Insertion Recept # - A188 Self-Ejecting Plug Release Inlet # - 338-A188
Self-Ejecting Connector Release Recept # - 348-A188 Straight Insertion Inlet # - A188
Emergency Stop Pawl Recept # - 375 With No Lockout Hole Inlet # - A155
Locking Mushr
or
Padlockable Mushroom Pawl Recept # - 843
Metal Pawl (on poly r
° Opening Lid Recept # - 180
180
oom Pawl
eceptacle)
Recept #
Recept # - 824
845
-
Closed Lid Configuration Recept # - NC
With Auxiliary Switch Recept # - 270
+
Notes:
DS100 devices with 3 or mor
e not UL/CSA listed
ar
e auxiliar
y/pilot contacts
For Auxiliary Switch Inlet # - NNF
DS100 Order Example:
To order 2 auxiliary/pilot contacts on an inlet and
eceptacle add
r
DS100 Poly inlet 3P+E=33-98043
DS100 Poly receptacle 3P+E=33-94043
Appr
included on the order.
-172
opriate accessory part numbers must also be
to the par
t numbers.
-172
-172
Installation Accessories
nless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles
U
Handles
NPT Cable Range
3/4” 9PH34 9H34 .70 - 1.00 – 65-9A013-D25
1” 9PH1 9H1 1.00 - 1.375 – 65-9A013-D35
1 1/4” 9PH114 9H114 1.250 - 1.375 9PM622 –
1/2” 9PH112 9H112 1.375 - 1.750 – 65-9A013-D45
1
2” 9PH2 9H2 1.438 - 1.562 9PM625 –
Poly Metal* Poly Handle Santoprene
Handle Handle w/Clamp & Bushing Handle
1.562 - 1.688 9PM627 –
1.688 - 1.812 9PM629 –
P 66/67
I
DS100
TM
otes:
Finger draw plates are recommended for easier connector closure on cord to cord assemblies.
N
•
For available cord grips, see pgs 167-168.
•
* For metal devices only
Angles
Nylon 30° Metal 30° Metal 70° Metal Angle Metal Straight
Angle Angle Angle Oversized 30° Adapter
MP10 MA10 89-9A027 MA110 MS10
Miscellaneous Accessories
manent Drawbar 1 Drawbar
Removable Drawbar
Complete Kit * Complete Kit ** 1 Attached Plate
NT100 NT110 NT120 39-9A486 39-9A024-486 39-9A014-486
* Consists of 1 Drawbar and 2 Plates
1 Drawbar 1 Plate 1 Plate
Per
** Consists of 1 Drawbar with Attached Plate and 1 additional Plate
For a guideline of NPT sizes based on cable ranges,
•
ee DS30 on pg 38.
s
Junction Boxes
NPT
1 1/4” MB10114 31-9A053-080-114 39-9A053-080-114
1 1/2” MB10112 31-9A053-080-112 39-9A053-080-112
2” MB102 31-9A053-080-2 39-9A053-080-2
2 1/2” MB10212 31-9A053-080-212 39-9A053-080-212
Metal Metal Box with Metal Box with
Box Nylon Angle Metal Angle
Order Example
A typical order should include an inlet
part number, a receptacle part number
AND the matching handles, angles or
other required accessories.
Male Inlet with Handle (Plug)
37-98043 + 65-9A013-D25
DECONT
ACTOR
TM
Series Switch Rated Plugs & Receptacles
* Set of Two (2)
Finger Pr
Drawplates Cap Cap Aluminum with Mesh
FDP9SS 31-9A126 DS9MC see pgs 167-168
* Recommended for cord to cor
For Male
Devices Only
otective
d assembly applications, for easier connector closure
For Male
Devices Only
Padlockable
Cord Grip
Female Receptacle with Angle Adapter
37-94043 + MA10
44
Loading...