Meltric DR150 Catalog Page
DR150 Standard Duty Plugs & Receptacles – 150 A
UL/CSA Ratings
• Max Amperage & Voltage
150 A, 600 VAC
• Current Interruption Capability
For current interrupting up
to 250 VAC
For Switch-Rated devices, see DS
& DSN sections.
• Short Circuit Rating
65kA
Testing was performed with RK1
current limiting fuses sized at at least
100% of the devices ampacity rating.
• Environmental Ratings
Type 4X (Poly Standard)
Type 3R (Metal Standard)
Type 4X (Metal Optional)
• Temperature Range
Min -40°F/Max 140°F
See pg 256 for temps below -15°F.
• Wiring Capacity
Min 4 AWG Max 2/0 AWG
Aux Contacts - Max 14 AWG
Based on THHN wire sizes
• Certifications
UL 1682, CSA 182.1
If you have an existing removable and/or
!
permanently attached drawbar, contact
customer service.
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
120V
120 208V
125V
125 250V
208V
208V
250V
250V
277V
277 480V
347 600V
480V
480V
600V
600V
1P+N+G 31-94235-K16 39-94235-K16 31-98235-K16 39-98235-K16
3P+N+G 31-94237-K16 39-94237-K16 31-98237-K16 39-98237-K16
1P+N+G 31-94175-K07 39-94175-K07 31-98175-K07 39-98175-K07
2P+N+G 31-94176-K07 39-94176-K07 31-98176-K07 39-98176-K07
2P+G 31-94232-K16 39-94232-K16 31-98232-K16 39-98232-K16
3P+G 31-94233-K16 39-94233-K16 31-98233-K16 39-98233-K16
2P+G 31-94172-K07 39-94172-K07 31-98172-K07 39-98172-K07
3P+G 31-94173-K07 39-94173-K07 31-98173-K07 39-98173-K07
1P+N+G 31-94245-K04 39-94245-K04 31-98245-K04 39-98245-K04
3P+N+G 31-94247-K04 39-94247-K04 31-98247-K04 39-98247-K04
3P+N+G 31-94187-K14 39-94187-K14 31-98187-K14 39-98187-K14
2P+G 31-94242-K04 39-94242-K04 31-98242-K04 39-98242-K04
3P+G 31-94243-K04 39-94243-K04 31-98243-K04 39-98243-K04
2P+G 31-94182-K14 39-94182-K14 31-98182-K14 39-98182-K14
3P+G 31-94183-K14 39-94183-K14 31-98183-K14 39-98183-K14
Receptacle
(female)
Easy Closing
Mechanism
Poly casing opens to
180° while the metal
casing opens only 90°.
North American UL/CSA Congurations
Part # Part #
Poly Metal Poly Metal
Inlet
(male)
Tabs for latching to
closing mechanism
Main Options
5/16”
hole
See pages 233-242 for detailed
information on these options
!
91
Auxiliary/Pilot
Contacts
Mushroom
Pawl
Padlock Pawl
Closed Lid
Configuration
Recommended for cord
applications to keep lid
tucked in to avoid damage.
Receptacle Options Suffix # Inlet Options Suffix #
With 2 Auxiliary/Pilot Contacts Recept # - 262 With 2 Auxiliary/Pilot Contacts Inlet # - 262
With 3 Auxiliary/Pilot Contacts Recept # - 263 With 3 Auxiliary/Pilot Contacts Inlet # - 263
With 4 Auxiliary/Pilot Contacts Recept # - 264 With 4 Auxiliary/Pilot Contacts Inlet # - 264
With 5 Auxiliary/Pilot Contacts Recept # - 975 With 5 Auxiliary/Pilot Contacts Inlet # - 975
With 6 Auxiliary/Pilot Contacts Recept # - 976 With 6 Auxiliary/Pilot Contacts Inlet # - 976
Type 4X & Closed Lid Configuration Recept # - 4X
Mushroom Pawl Recept # - 375 With No Lockout Hole Inlet # - A155
Padlock Pawl Recept # - 843 For Auxiliary Switch Inlet # - NNF*
Padlockable Mushroom Pawl Recept # - 375-843
Locking Mushroom Pawl Recept # - 845
Metal Pawl (on poly receptacle) Recept # - 824
180° Opening Lid Recept # - 180++
Closed Lid Configuration Recept # - NC
With Auxiliary Switch Recept # - 270+
Notes: + Not UL/CSA listed.
++
Required when mating to rigid mounted male inlet.
i
Metal devices only.
i
Type 4X Watertightness Inlet # - 4X
Notes: * Order inlet with P+N+G configuration and receptacle with
P+G configuration.
i
i
Order Example: 480V DR150 + 2 auxiliary contacts
Metal devices only.
DR150 Poly inlet 3P+G = 31-98243-K04-972
i
INSTALLATION ACCESSORIES – SIZE 5
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles.
DR150
HANDLE w/NPT Part # Poly Part # Metal
3/4” 515P0N07 595P0N07
Poly
HANDLESANGLES
For metal devices only
1” 515P0N10 595P0N10
1 1/4” 515P0N12 595P0N12
Metal
1 1/2” 515P0N15 595P0N15
2” 515P0N20 595P0N20
For available cord grips, see pg 165.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
For metal devices only
METAL OVERSIZED HANDLE w/NPT
3/4” 795P0N07
1” 795P0N10
1 1/4” 795P0N12
1 1/2” 795P0N15
For metal devices only
2” 795P0N20
2 1/2” 795P0N25
Cable Range Part #
.980 - 1.260” 715P0EP4
1.260 - 1.560” 715P0FP1
1.520 - 1.860” 715P0GP2
1.250 - 1.375” 795P0FS1
1.438 - 1.562” 795P0FS2*
1.562 - 1.688” 795P0FS3*
1.688 - 1.812” 795P0GS1
*May require stripping of cable jacket.
For available cord grips, see pg 165.
SANTOPRENE HANDLE
.70 - 1.000” 555P0D25
.984 - 1.377” 555P0D35
IP66/IP67
POLY HANDLE w/CLAMP & BUSHING
POLY ANGLE
30° 515M3
1.378 - 1.771” 555P0D45
1.250 - 1.375” 715P0S22
1.438 - 1.562” 715P0S25
1.562 - 1.688” 715P0S27
1.688 - 1.812” 715P0S29
POLY ANGLE WITH METAL BOX w/NPT Part #
BOXESMISCELLANEOUS ACCESSORIES
* 108.7 in
METAL ANGLE WITH METAL BOX w/NPT
* 111.8 in
METAL BOX w/NPT
30° 1 1/4” 715C3N12
30° 1 1/2” 715C3N15
30° 2” 715C3N20
3
30° 2 1/2” 715C3N25
30° 1 1/4” 795C3N12
30° 1 1/2” 795C3N15
30° 2” 795C3N20
3
30° 2 1/2” 795C3N25
0° 1 1/4” 7T5F0N12
0° 1 1/2” 7T5F0N15
0° 2” 7T5F0N20
0° 2 1/2” 7T5F0N25
NPT on top or bottom (if rotated). For other NPT configurations, contact customer service.
PROTECTIVE INLET/PLUG CAP
31-9A426
PADLOCKABLE INLET/PLUG CAP
DS9MC
CORD GRIP with MESH
For Inlets/Plugs Only.
Covers lockout hole for watertight seal on inlet.
Consult Customer Service for availability.
Aluminum – For Inlets/Plugs Only.
-A155 suffix required to maintain water ingress protection.
* Interior volume with
receptacle installed.
* Interior volume with
receptacle installed.
DR / PN
METAL ANGLE
0° 595M0
30° 595M3
Oversized 30° 795M3
70° 595M7
Mounts on oversize
metal box only. Order
with 7T6F0N25XL. See
pg 52.
see pg 165
EASY RETROFIT ADAPTER PLATES
see pg 162 Mount to existing boxes.
RECEPTACLE LOCKING PIN
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
92
Loading...