Meltric DN9c Catalog Page
DN9c Multipin Plugs & Receptacles – 20 A
Ratings
• Voltage
50 VAC or 480 VAC Max/130 VDC
+
For DC order 480V model.
Not CSA listed.
• Amperage Rating
20 A Current Interrupting
• Horsepower Ratings
1Ø 1/2 hp
120V
1Ø 1 1/2 hp
240V
208V
3Ø 2 hp
240V
3Ø 3 hp
480V
3Ø 5 hp
• Environmental Ratings
IP54/IP55
• Temperature Range
Min -40°F/ Max 140°F
See pg 258
for temps below -15°F.
• Wiring Capacity
Min 16 AWG Max 10 AWG
• Certifications
CSA 182.01
+
Don’t forget to add installation
accessories to your order
!
Voltage Polarity
50V
50V
50V
50V
480V
480V
480V
480V
Receptacle
(female)
Inlet
(male)
North American Congurations
Part # Part #
Metal Metal
6P 17-14060 17-18060
7P 17-14070 17-18070
8P 17-14080 17-18080
9P 17-14090 17-18090
5P+G 17-14051 17-18051
6P+G 17-14061 17-18061
7P+G 17-14071 17-18071
8P+G 17-14081 17-18081
Main Options
See pages 235-244 for detailed
information on these options
!
71
Mushroom
Pawl
Padlock Pawl
Receptacle Options Suffix # Inlet Options Suffix #
Straight Insertion Recept # - A188
Self-Ejecting Connector Release Recept # - 348-A188
HP Watertightness (high pressure) Recept # - HP
Mushroom Pawl Recept # - 375
Screw-Type Locking Pawl
Padlock Pawl Recept # - 843
Padlockable Mushroom Pawl Recept # - 375-843
Closed Lid Configuration Recept # - NC
Order Example: 50V DN9c with Closed Lid Configuration
DN9c Receptacle 9P = 17-14090-NC
Recept # - 845
INSTALLATION ACCESSORIES – SIZE 3
Unless indicated otherwise, accessories can be used with either poly or metal plugs and receptacles.
DN9c
HANDLE w/NPT
1/2” 513P0N05 593P0N05
Poly
HANDLESANGLES
3/4” 513P0N07 593P0N07
1” 513P0N10 593P0N10
Metal
1 1/4” 513P0N12 593P0N12
For available cord grips, see page 167.
POLY HANDLE w/CORD GRIP
METAL HANDLE w/CORD GRIP
POLY HANDLE
POLY HANDLE w/BUILT IN DRAW GRIPS
POLY HANDLE w/CLAMP & BUSHING
METAL ANGLE
0° 593M0
Part # Poly Part # Metal
Cable Range Part #
.520 - .680” 713P0CP5
.680 - .980” 713P0DP4
.980 - 1.260” 713P0EP4
.625 - .750” 793P0CS4
.750 - .875” 793P0DS1
.875 - 1.000” 793P0DS3
1.000 - 1.125” 793P0ES2
.39 - 1.18” 513P0D30
.39 - 1.18” 513P0D30473
Makes connector closures easier.
.770 - .875” 713P0S14
.875 - 1.000” 713P0S16
1.000 - 1.125” 713P0S18
1.125 - 1.250” 713P0S20
1.250 - 1.375” 713P0S22
METAL BOX w/NPT Part #
BOXESMISCELLANEOUS ACCESSORIES
METAL ANGLE WITH METAL BOX w/NPT
* 30.1 in
0° 1/2” 7T1F0N05
0° 3/4” 7T1F0N07
0° 1” 7T1F0N10
0° 1 1/4” 7T1F0N12
30°
30° 3/4” 793C3N07
30° 1” 793C3N10
30° 1 1/4” 793C3N12
3
1/2”
793C3N05
NPT on top or bottom (if rotated). For other NPT configurations, contact customer service.
FINGER DRAWPLATES
61-6A346
PROTECTIVE INLET/PLUG CAP
Set of Two (2)
Recommended for cord to cord assembly applications, for
easier connector closure.
* Interior volume with
receptacle installed.
MULTIPIN
30° 593M3
FS/FD Box 30° 793M3FS
70° 593M7
* Base measures
approximately 4.2” x
2.7”. Due to the
variation in sizes of
FS boxes, please
verify that your FS
box matches our
dimensions, if not call
Customer Service for
other solutions.
19-1A126 For Inlets/Plugs Only.
CORD GRIP with MESH
see pg 16
RECEPTACLE LOCKING PIN
LP-843 Requires Padlockable Pawl option (-843) on receptacle.
7
72
Loading...