Meltblown Technologies OS396-15 User Manual
SAFETY DATA SHEET
SECTION 1: COMPNAY AND PRODUCT IDENTIFICATION
(a) PRODUCT IDENTIFIER:
(b) OTHER MEANS OF IDENTIFICATION:
SECTION 1: COMPANY AND PRODUCT IDENTIFICATION
(a) PRODUCT IDENTI
(b) OTHER MEANS OF IDENTIFICATION:
SECTION 2: HAZARDS IDENTIFICATION
Hazard Classification
(a) Hazard
Category
(b) Hazard
Symbols
(b) Signal
Word
(b) Hazard
Statement
(b)
Precautionary
Statement
Human Health Hazards
Acute Toxicity (Oral)
N/C - - - -
Acute Toxicity (Dermal)
N/C - - - -
Acute Toxicity (Inhalation)
N/C - - - -
Skin Corrosion/Irritation
N/C
Eye Damage/Irritation
N/C
Respiratory Sensitization
N/C - - - -
Skin Sensitization
N/C - - - -
Germ Cell Mutagenicity
N/C - - - -
Carcinogenicity
N/C - - - -
Reproductive Toxicity
N/C - - - -
Specific Target Organ Toxicity
Single-Exposure
N/C - - - -
Specific Target Organ Toxicity
Repeated or Prolonged Exposure
N/C - - - -
Aspiration Hazard
N/C - - --
Oil Only Absorbents Revision Date: 11/30/2015
WM100 WDM143 BFMFL150S BB20
WML100 WFMF100 BFMFL150S-1 B10PSN
WM200 WFMFL100 WSMS100 OSP1818-10
WM200-HQ WFMF150 WSMS200 OSP818-20
WM150 WFMF150S WSMSL100 OS3144-10
WM150S WFMF150S-1 WSMS150 OS348-30
WDM100 WFMFL150 WSMS150S-1 OS396-15
WDM200 WFMFL150S WSMSL150 W750
WDM50
WDM200-HQ BFMF100 B510SN
WDML100 BFMF150 B520SN
WDM150 BFMF150S B810SN
WDML150 BFMF150S-1 B820SN
WDM144 BFMFL150 S1900
WFMFL150S-1
WSMSL150S-1 WDT22NL
SRM1825
SRM1850
SRM100
SRM3601
(c) Recommended Use: Absorbent
Restrictions On Use: Not to be used for anything other than recommended use.
(d) Manufacturer: Meltblown Technologies ▪ 655 East Church St. ▪ Sandersville, GA 31082 ▪
(e) 24 HR EMERGENCY ASSISTANCE PHONE NUMBER: 800-259-7111
Page 1
SAFETY DATA SHEET
INHALATION:
Not Applicable
INGESTION:
Not Applicable
SKIN CONTACT:
Not Applicable; Product is inert. If product is melted, use gloves.
For hot melted product, immerse of flush affected area with water to dissipate heat and obtain medical attention.
EYE CONTACT:
Not Applicable
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
(a) Chemical name (b) (Common name and synonyms)
(c) CAS No.
(b) % Weight
POLYPROPYLENE
9003-07-0
100%
SECTION 4: FIRST AID MEASURES
SECTION 5: FIRE FIGHTING MEASURES
Oil Only Absorbents Revision Date: 11/30/2015
(c) Hazards not otherwise classified: None identified.
(d) Unknown acute toxicity: <1% of this mixture consists of ingredients of unknown dermal and inhalational toxicity.
Medical conditions which are generally recognized as being aggravated by exposure:
This product is not dangerous in its unused form and contains no hazardous ingredients. There are no risks to general
population.
(a) Description of necessary measures:
(b) Most important symptoms/effects:
Acute: None
Delayed: None
(c) Indication of immediate medical attention and special treatment: Not Applicable
Notes to physician: Not Applicable
General advice: Not Applicable.
(a) Suitable extinguishing media: Water spray
Unsuitable extinguishing media: None identified.
(b) Specific hazards arising from the chemical: None identified.
(c) Special protective equipment and precautions for fire-fighters: Be cautions of hot melted polypropylene. Isolate
product from fire. Respiratory and eye protection required for firefighting personnel.
(d) Flammability/Explosivity: Flash point: > 600 °F; 315 °C (estimated)
LFL/LEL: Not established
UFL/UEL: Note established
(e) Hazardous Decomposition Products: Oxygen-lean conditions may cause monoxide and irritating smoke.
Page 2
Loading...