Mellerware PROGLIDE STEAM IRON 23600, Executive PROGLIDE 23600 Instructions Manual

PLEASE READ ALL INSTRUCTIONS BEFORE USE

2 year guarantee

EXECUTIVE

PROGLIDE STEAM IRON

Model:
23600

2200W

complies with

INTERNATIONAL

IEC60355

SAFETY SPECIFICATIONS

MW_WX23600_PROGLIDE_IRON_IM.indd 1MW_WX23600_PROGLIDE_IRON_IM.indd 1 7/21/2009 4:41:30 PM7/21/2009 4:41:30 PM

Dear Customer,

Thank you for purchasing a MELLERWARE household appliance. Its technology, design, and functional-

ity, along with complying to the strictest quality standards, will be a source of satisfaction for a long time

to come. Please read this instruction manual carefully and familiarize yourself with your new steam iron.

Before using the first time, please retain this manual for future reference.

A. Spray Nozzle

B. Water filling inlet

C. Steam control turning knob

D. Burst of steam button

E. Spray Button

F. Soft touch grip

G. Temperature control dial

H. Power cord protector

I. Water tank

J. Ceramic soleplate

K. Self-cleaning button

A

C

D

E

F

G

H

I

J

K

B

MW_WX23600_PROGLIDE_IRON_IM.indd 2MW_WX23600_PROGLIDE_IRON_IM.indd 2 7/21/2009 4:41:31 PM7/21/2009 4:41:31 PM

IMPORTANT SAFEGUARDS

When using your iron, basic safety precautions

should always be followed:

Make sure the voltage used corresponds with •

the one indicated on the rating label.

Use the iron only for needed use as described •

in the instruction manual.

Close supervision is necessary when any appli-

ance is used near children. Do not leave iron un-

attended while connected or on an ironing board.

Burns can occur from touching hot metal parts, hot

water or steam.

Keep the iron out of reach of children.•

The iron should never be left unattended while •

it is connected to the mains supply.

Unplug the iron from the mains electrical sup-•

ply before:

1) Cleaning

2)Filling with water or emptying the water tank

3) Immediately after use

Never operate the iron with a damaged power •

cord or plug, or after it has fallen or been dam-

aged in any way. To avoid the risk of electric

shock, do not disassemble the iron. Take it to

a qualified serviceman for examination and

repair.

Do not let the cord touch hot surfaces.•

To protect against a risk of electric hazards, •

do not immerse the iron in water or any other

liquid.

The iron must be used and rested on a stable •

surface.

The iron is not to be used if it has been •

dropped, if there are visible signs of damage

or if it is leaking.

BEFORE FIRST USE

It is normal for a small amount of smoke to be •

produced the first time, this will quickly disap-

pear.
When using the steam function for the first •

time, do not direct the steam towards the laun-

dry, as there could be debris from the steam

vents.

FILLING WITH WATER

Make sure that both the Steam Control turn-•

ing Knob and Temperature Control Dial are in

“OFF” position.

Hold the iron upright so that the water-filling •

inlet is in a horizontal position.

Fill with water through Water Filling Inlet until •

the water reach the “MAX” mark indicated on

the side of the iron, and never fill above this

mark.

SETTING TEMPERATURE

Follow the ironing instructions on the garment la-

bel. If there is no instruction but you do know the

kind of fabric, please consult the following table.

Note: If the fabric consists of various kinds of fab-

rics, always select the temperature required by the

most delicate fabrics.

FABRIC TEMP. CONTROL TEMP. REQUIREMENT

Synthetic • Low temperature

Silk, wool •• Medium temperature

Cotton, linen ••• High temperature

MW_WX23600_PROGLIDE_IRON_IM.indd 3MW_WX23600_PROGLIDE_IRON_IM.indd 3 7/21/2009 4:41:32 PM7/21/2009 4:41:32 PM