Mellanox LinkX Active Optical Cables and Transceivers Overview
INTERCONNECT
PRODUCT BRIEF
LinkX™ Active Optical Cables and Transceivers
Overview
Mellanox LinkX optical cables and transceivers make 100Gb/s deployments as easy as 10Gb/s. A wide
range of products supports Ethernet and InniBand (IB) applications with reaches from 3m to 10km.
In addition to meeting or exceeding IBTA and IEEE standards, LinkX certied products are 100% tested on
Mellanox equipment to ensure optimal signal integrity and the best end-to-end performance.
With Mellanox optical cables and transceivers, you will experience troublefree installation and long-term
operation.
Table 1 - Optical Transceivers
Form Factor Part Number Application Connector Max. Reach Wavelength
MMA1B00-C100D 100GbE SR4 MPO 100m
MMA1B00-C100C 100GbE SR4 CPRI MPO 100m
QSFP28
QSFP+
SFP28
SFP+ MFM1T02A-LR 10GbE LR LC-LC 10km 1310nm
SFP MC3208011-SX 1GbE SX LC-LC 500m 850nm
MMS1C10-CM 100GbE PSM4 MPO 500m
MMA1L30-CM 100GbE CWDM4 LC-LC 2km
MMA1B00-B150D 40GbE SR4, DDMI MPO 150m 850nm
MC2210411-SR4 40GbE, IB FDR10 SR4 MPO 150m 850nm
MC2210511-LR4 40GbE, IB FDR10 LR4 LC-LC 10km 1310nm
MC2207411-SR4L IB FDR SR4L MPO 30m 850nm
MC2210411-SR4E 40GbE SR4E MPO 300m 850nm
MC2210411-SR4L 40GbE SR4L MPO 30m 850nm
MMA2L20-AR 25GbE LR LC-LC 10km 1310nm
MMA2P00-AS 25GbE SR LC-LC 100m 850nm
MFM1T02A-SR 10GbE SR LC-LC 300m 850nm
MC3208411-T 1GbE Base-T RJ-45 100m NA
850nm
1310nmMMA1L10-CR 100GbE LR4 LC-LC 10km
HIGHLIGHTS
– Low power consumption
– Compliant with SFF MSA
– Low insertion loss
– BER better than 1E-15
– Tested in Mellanox’s end-to-end
environment
– RoHS compliant
Table 2 - Active Optical Cables
Form Factor Part Number Application Max. Length
MFS1S50-HxxxE IB HDR, 200Gb/s to 2x100Gb/s 30m
MFS1S00-HxxxE IB HDR (200G) 100m
QSFP28
©2018 Mellanox Technologies. All rights reserved.
MFA7A20-Cxxx 100GbE to 2x50GbE 20m
MFA7A50-Cxxx 100GbE to 4x25GbE 30m
MFA1A00-Exxx IB EDR (100G) 100m
MFA1A00-Cxxx 100GbE 100m
Mellanox LinkX Active Optical Cables and Transceivers Overview
Table 2 - Active Optical Cables (cont).
Form Factor Part Number Application Max. Length
MC220731V-xxx FDR 100m
QSFP+
MC2207312-xxx FDR 300m
MC2210310-xxx 40GbE 100m
MC2206310-xxx IB QDR, FDR10 100m
SFP28 MFA2P10-Axxx 25GbE 100m
Table 3 - Passive Optical Cables
Form Factor Part Number Fiber Type Max. Length
MPO to 4xLC-LC MC6709309-xxx MMF 50m
MPO to 2xMPO MFP7E00-Cxxx MMF 20m
Table 4 - Accessories
Form Factor Part Number Application
QSFP+ MAM1Q00A-QSA QSFP+ to SFP+
QSFP28 MAM1Q00A-QSA28 QSFP28 to SFP28
page 2
For detailed information, please see each product’s specic product brief.
Warranty Information
Mellanox LinkX active optical cables and transceivers include a 1 year limited hardware warranty, which covers parts repair or replacement.
350 Oakmead Parkway, Suite 100, Sunnyvale, CA 94085
Tel: 408-970-3400 • Fax: 408-970-3403
www.mellanox.com
© Copyright 2018. Mellanox Technologies. All rights reserved.
Mellanox and Mellanox logo are registered trademarks of Mellanox Technologies, Ltd.
LinkX is a trademark of Mellanox Technologies, Ltd. All other trademarks are property of their respective owners.
52998PB
Rev 3.2
Loading...