Melitta Senz V MSP001 Quick Start Manual

Page 1
Senz V
TM
The world’s very rst smart pour-over device
with quantied measurements of coee brewed
QUICK START GUIDE
Page 2
Thank you for choosing the Melitta® smart pour-over coee maker, SenzV. It is our sincerest desire for you to have the best experience in brewing your very own cup of coee.
Below please nd the operating instructions. It will guide you through the pairing and brewing process. Should you require further information, please go to the “I/B” section on your APP “Wabilogic”
Note: To avoid hazards please make sure to read all safety notes and operating instructions. Melitta® and Wabilogic Inc. are not liable for any damages caused by ignoring these instructions.
Page 3
Tare
Tare
JIH
G
F
K
L
M
E
D
C
B
A
Product Name : SENZ V
Model Number : MSP001
Battery Capacity : 500 mAh
USB input voltage: DC5V +/- 0.25V
Bluetooth 4.2
Indoor use only
Body Brew Cone Buer Tank Carafe Control Panel Bean Icon Water Drop Icon Scale - indicates weight of materials in mL, gm or oz Bluetooth & Battery Temperature -
indicates unit in ˚C or ˚F
Start/Stop - Press to Start or Stop the process. Hold for 5s to change units. ON/TARE - Hold for 5s to turn On or turn O the device. Brew Result - Classication of brewed coee.
A. B. C. D. E. F. G. H. I. J. K. L. M.
Page 4
QR Code
Download the APP & Pair
Page 5
Introducing the APP
Real time analysis of coee taste & extraction
Personalized recipe to enable repeat brewing and bettering of coee making
Social community enabling exchange of brewing experience.
Interesting games and psychological test associated with the cup of coee brewed.
Recommendation of coee shops and products
Special discount for loyal customers
Page 6
1)
2)
3)
Press A to turn on the device. Press B to start brewing. C will be ashing. Add in desired amount of ground coee.
4)
When the device is ready to proceed to the next step, D will be ashing. Add in water intermittently.
Start brewing your very own cup of coee
5)
Press B to nish the brewing process. The brew result is then displayed in E.
To activate the siphon eect, pour at least 4 oz or 125ml of water into the Brew cone. Finer and excessive coee grounds would require more water.
Tare
Tare
A
C
D
E
B
Page 7
wabilogic.com
Service hotline: 1-800-772-0707
09/18
MSP001
Patent pending
Page 8
Warning
1. Do not clean the device's body under running water.
2. Clean the body with a piece of a slightly damp cloth with water.
3. Please do not place anything more than 35 Oz on the scale.
4. The device contains parts that are fragile. Please handle with care.
5. The device is hot when in use.
6. Keep the connection pin dry and clean.
7. Do not immerse the body in water or any other liquid.
Limited Warranty
In addition to the legal warranty claims, to which the end user is entitled relative to the seller, for this
device, if it was purchased from a dealer authorized by Wabilogic Inc. due to his consulting
competence, we grant a manufacturer’s warranty under the following conditions:
1 year limited warranty from the date of original purchase.
• This warranty extends only to the original retail purchaser or gift recipient. Keep the original sales
receipt, as proof of purchase is required to make a warranty claim.
• Defects that occur due to improper connection, improper handling or repair attempts by
non-authorized persons are not covered by the warranty. The same applies for failure to comply
with the use of consumables (e.g. cleaning and descaling agents) that do not correspond to the
original specifications. Wear parts (e.g. seals and valves) and fragile parts are excluded from the
warranty.
• This device was designed and built for household use only. It is not suited for other uses.
• Warranty does not cover damages that are not the responsibility of the manufacturer. This is valid
especially for claims arising from improper use (e.g. operation with insufficient current or improper
voltage)
MSP001 07/18
Page 9
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between
the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.
IC Warning:
This device complies with Industry Canada Iicense-exempt RSS standard(s).
This equipment complies with IC RF radiation exposure limits set forth from an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between
the radiator and your body.
Operation is subject to the following two conditions: (1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Loading...