Page 1
LED STAR LIGHT
Operation and Safety Notes
6
Z31245A -BS
Z31245B -BS
Z31245C -BS
Z31245D -BS
Z31245E -BS
Page 2
GB / IE Operation and Safety Notes Page 5
Page 3
A
B
1
1
C
2
4
3
Page 4
D
E
4
3
5
6
21 3
1
F
Z31245A-BS / Z31245B-BS /
Z31245C-BS / Z31245D-BS Z31245E-BS
G
4
2 x
Page 5
LED Star Light
Introduction
Keep all the safety advice and instructions
in a safe place for future reference. If you
pass the product on to anyone else, please
ensure that you also pass on all the documentation
with it.
Proper use
This product is suitable only for use in an indoor
environment. The product is intended only for use in
a private domestic environment and not for commercial use.
Description of parts
1
Lamp shade
2
Mains plug
3
LED light set
4
LED bracket
5
Cord stopper
6
Cord
Technical data
LED light set (light chain):
Rated power
and voltage: 220–240 V∼, 50 Hz, 1.05 W
Bulbs: 10 x LED, 3 V
Protection class:
Model No.:
Z31245A-BS: red
Z31245B-BS: gold matt
Z31245C-BS: white
Z31245D-BS: silver matt
Z31245E-BS: yellow / black
, 0.06 W
Included items
1 LED light set (light chain)
1 LED bracket
1 Lamp shade
2 Spare bulbs
1 Operating instructions
Safety advice
The right to claim under the warranty is made invalid
in respect of damage caused by the non-observance
of these operating instructions. No liability is accepted
for consequential damage. No liability is accepted
for damage to property or persons caused by improper handling or non-observance of the safety
advice.
RISK OF LOSS
OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never
leave children unsupervised with the packaging
materials. Packaging materials present a suffocation hazard. Children often underestimate
danger. Always keep children away from the
product.
This product is not a toy. It does not belong in
the hands of children. Children do not appreciate the dangers associated with the product.
Children or persons who lack the knowledge or
experience to use the device or whose physical,
sensory or intellectual capacities are limited must
never be allowed to use the product without
supervision or instruction by a person responsible
for their safety. Children must be supervised so
that they do not play with the product.
Ensure that the product is operated only by
people who know how to use it.
CAUTION! RISK OF OVERHEATING! Do
not operate the product whilst it is still in the
packaging.
After use store the product in the original pack-
aging to avoid causing unintentional damage.
Do not pull on the product’s lead.
Do not attach any other objects to the product.
5 GB/IE
Page 6
This product is designed only for use
indoors in dry and enclosed rooms.
Use
Note: The bulbs are connected in series. If one
bulb is defective, up to 10 bulbs may not light up.
Avoid risk to life from electric
shock!
Before use ensure that the available mains volt-
age agrees with the operating voltage specified
for the product (220–240 V∼).
Before connecting the product to the mains,
always check it and the mains plug for any
damage.
Do not use the product if you discover it is
damaged in any way.
This product’s external flexible tube is non-
replaceable. Hence if it becomes damaged
you must dispose of the entire product.
Never open any electrical fittings or allow any
object to be inserted into them.
Protect the mains lead from sharp edges,
mechanical loads and hot surfaces.
Never fix the product in place with clips or
nails.
Before installing, uninstalling or cleaning, always
pull the mains plug out of the mains socket.
Do not touch the product’s plug or even the
product itself if your hands are wet.
Keep the product away from moisture.
This product must not be electrically connected
to another product.
Disconnect the product from the mains supply if
it is not going to be used for some time (e.g.
holiday).
If you have any questions about the product or
are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Do not remove nor replace any LEDs if the light
set is still connected to the mains power supply.
Replace LEDs only with LEDs of the same type
as the ones supplied with the product.
Unfold the lamp shade 1 (Fig. A and B).
Insert the LED bracket 4 with the LED light set 3
into the lamp shade
1
(Fig. C and D).
Fold the lamp shade 1 back together.
Pull the cord 6 through the cord stopper 5
to close the lamp shade
1
(Fig. E).
Insert the mains plug 2 into the mains socket.
The LEDs are switched on.
Pull the mains plug 2 out of the mains socket
to switch off the LEDs.
Replacing a bulb
Replace the bulb as shown in Fig. G.
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK!
First of all pull the mains plug out of the mains socket.
CAUTION! RISK OF ELECTRIC SHOCK!
For electrical safety reasons never clean the product
with water or other fluids nor immerse it in water.
Do not use solvents, such as petrol and the like,
as they could damage the product.
Use only a dry, fluff-free cloth for cleaning.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your discarded
product.
6 GB/IE
Page 7
In the interest of the environment, do not
throw out your product with your house-
hold refuse. Take it to a suitable centre
where it can be disposed of properly.
Your local council will be able to tell you
where the collection centres are located
and their opening times.
EMC
7 GB/IE
Page 8
IAN 74195
Milomex Ltd.
c/o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK
Model No.: Z31245A-BS / Z31245B-BS / Z31245C-BS / Z31245D-BS / Z31245E-BS
Version: 06 / 2012
© by ORFGEN Marketing
Last Information Update: 05 / 2012
Ident.-No.: Z31245A / B / C / D / E-BS042012-6
6
Loading...