![](/html/00/0067/00677bc5976ef6c35844d3ee1d8d069fa0ba9c1b079585045840ee28e30eb7cc/bg1.png)
LED FAIRY LIGHTS
Operation and Safety Notes
6
Z30174A-BS
Z30174B-BS
1 x
Q
LED Fairy Lights
1
3
1 x
2
1 x
Q
Proper use
This product is suitable for indoors and outdoor use.
This product is intended for use in private, domestic
enviroment only and not for commercial purposes.
Q
Delivery scope
1 LED Fairy Lights
1 Mains adapter
1 Operating manual
Q
Description of Parts
1
LED Fairy Lights
2
Mains adapter
3
Control Box
GB/IE GB/IE GB/IE GB/IE GB/IE
Technical data
LED Fairy Lights
Operating voltage: 24 V ~, 50 Hz, 4.8 W
Bulb: 80 x 3 V
Protection class:
Light chain (Model No. Z30174A-BS/Z30174B-BS)
LED Colour: Z30174A-BS: Warm white
Z30174B-BS: Cool white
Mains adapter
Nominal voltage
primary: 230 -240 V ~, 50 Hz
Nominal voltage
secondary: 24 V ~, 5 VA
Protection class:
Mains adapter (Model No. P2405)
1
:
, 0.02 A, 0.06 W
(bulbs are non-replaceable)
2
:
In the case of damage resulting from non-compliance with these operating instructions the guarantee claim becomes invalid! No liability is accepted for consequential damage! In the case of
material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!
Never leave children unsupervised with the
represents a danger of suffocation. Children
This device is not a toy and should not be
Safety Information
DANGER OF
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
packaging material. The packaging material
frequently underestimate the dangers. Please
keep children away from the device at all times.
played by children. Children are not able to
understand the dangers that can occur when
handling this device.
Children or other individuals who do not know
or have no experience of handling this device,
or whose physical, sensory or mental abilities
are restricted, must not use the device without
supervision or instruction by an individual
responsible for their safety. Children must be
supervised in order to ensure that they do not
play with the device.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING!
Do not operate the light chain
packaging.
After use, keep the light chain 1 in the pack-
aging to prevent unwanted damage.
Do not pull the light chain 1 cable and make
sure it is laid down properly so that no one
walks or trips over it.
The product can be used on all surfaces offi-
cially classified as being of “normal flammability“.
Do not attach any other objects to the product.
1
inside the
Before use, ensure that the mains voltage
Before connecting the device to the mains
Please ensure that all the bulb fitting sockets
Never use the light chain 1 if you discover
This light set‘s external flexible tube is non-
This article does not contain any parts which
Only use the light chain 1 with the supplied
Avoid the danger of
death from electric shock!
available is the same as the required operating
voltage for the device (230–240 V ~).
you should always check the light chain
and the mains adapter
have a bulb in them.
that it is damaged in any way.
replaceable. Hence if it becomes damaged
you must dispose of the entire light chain
can be serviced by the user. The bulbs cannot
be replaced.
mains adapter
P2405); all warranty claims will otherwise
expire.
2
for any damage.
2
for the type (Model No.
1
1
.
![](/html/00/0067/00677bc5976ef6c35844d3ee1d8d069fa0ba9c1b079585045840ee28e30eb7cc/bg2.png)
Never open any of the electrical parts or insert
any kind of object into them.
Protect the mains cable from sharp edges,
mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the mains adapter 2 from
the socket before installation, dismantling or
cleaning.
Never touch the light chain 1 plug or the
light chain
1
itself with wet hands.
The light chain 1 must not be electrically
connected to another light chain.
If the light chain 1 is not in use for any length
of time (e.g. holidays), disconnect them from
the power supply.
This product is intended for use outdoors but
should be plugged into a socket which is located in an indoor location (e.g. a shed, garage or porch).
The socket into which this product is plugged
must be protected by a residual current circuit
breaker (RCD) with a trip current not greater
than 30mA.
Sockets positioned outdoors for use with this
product should be of a type which is adequately water proof for an outdoor location
and should be located at least 2.5m from the
nearest body of water or any locations where
water may collect.
If you have any questions about the product
or are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Q
Use
Note: The light chain 1 has eight different light-
ing modes.
Note: The bulbs are connected in series. If one
bulb is defective, up to eight bulbs may not light up.
Insert the supply line plug into the socket of
the mains adapter
2
. Turn clockwise tighten
the union nut.
Plug the mains adapter 2 into the socket.
The lights are now switched on.
Press the button on the control box 3 to switch
to the next lighting mode. When you reach
lighting mode 8, the next press of the button
switches the light chain
1
back into lighting
mode 1.
Note: When you turn on the light chain
1
it always starts with the last selected lighting
mode.
To switch the lights off, disconnect the mains
adapter
Q
Cleaning and care
2
from the socket.
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains adapter
2
from the socket.
CAUTION! DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety the device
must never be cleaned with water or other liquids
or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the device.
Only a dry, lint-free cloth should be used for
cleaning.
Q
Disposal
,
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
IAN 75575
Milomex Ltd.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful life
c/o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK
and not in the household waste. Information on collection points and their
opening hours can be obtained from
Model No.: Z30174A-BS / Z30174B-BS
Version: 07 / 2012
your local authority.
© by ORFGEN Marketing
EMC
GB/IE GB/IEGB/IE GB/IE
Last Information Update: 05 / 2012
Ident.-No.: Z30174A-BS / B-BS052012-6