Meliconi Gumbody Facile 1 web User Manual

Keep this booklet for future reference.

IMPORTANT: The remote control must not be exposed to excessive heat sources.

The functions of the buttons described below are available only if they exist on your device.

EN

I

Thank you for choosing a Meliconi remote control.

The Facile 1 remote control is designed to control televisions. Thanks to its extensive database it can control
numerous TVs produced by a variety of brands on the market. It can also be connected to a PC using the
Meliconi audio cable (to be purchased separately), thereby allowing the user to download the most up-to­date confi guration information. The remote control has a non-volatile memory, meaning that it does not lose its
settings even if there are no batteries in it. Its ergonomic shape and soft rubber body make it easy to grip and
protect the remote control if it is knocked or dropped.

USE OF THE BUTTONS AND FUNCTIONS

Numeric keypad

Selects digital TV and radio

For moving around within the MENU

Volume control +/–

MUTE turns sound OFF and ON

TELETEXT buttons

Selects
analogue/digital

ON / OFF switches the device OFF and

For selecting the next programme

P+ or the previous programme P–

Fastext functions or for selecting sub-menus

Displays the list of programmes

in some cases ON

For selecting an external

input source

Specifi c buttons for decoder

Confi rm selection

using colours

6

Before using the remote control, insert the batteries and programme it.

SETTING CODES

SETTING CODES USING INTERNET

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.

Do not leave fl at batteries inserted,

as liquid may leak and damage the remote control

SETTING CODES USING A CELL PHONE

Insert them as illustrated.

Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.

The Facile 1 remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a specifi c code which must be used to set up the remote control.
So to use the Facile 1 you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c code for the TV you wish to command. Then set the codes manually in your MELICONI
remote control as described in the ENTERING THE CODE DIRECTLY procedure.

(the service s fee and the only cost is that of sending the SMS,

which naturally depends on the rates of the service operator in question)

Today, Meliconi gives customers who don’t have internet the chance to receive the code for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 1A, TV, Brand, Model

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 1A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button
on the remote.
If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.

7