Meliconi AD LTE User Manual

1

2

4

3

ADAPTER

COAXIAL

CABLE

5

INDOOR AMPLIFIED ANTENNA

FOR DIGITAL TERRESTRIAL SIGNAL

“AD PROFESSIONAL”

USER INSTRUCTIONS

Thank you for choosing MELICONI.

The AD PROFESSIONAL indoor amplified antenna receives digital terrestrial TV
and DAB radio signals, as well as traditional analogue signals on the UHF and VHF
(band III) bands.

GB

A

Secure the plastic support included in the kit to the body of the antenna using the special
screw (fi gure 1).
The antenna can be positioned horizontally or vertically on a fl at surface (fi gure 2) or
wall-mounted.
Proceed as follows to mount the antenna on a wall:
a. Hammer two nails with head diameter of approximately 6 mm into the wall. The

distance between the two nails should be 38 mm (1.5 inches).

b. Insert the heads of the two nails in the special plastic support holes at the back of the

antenna (fi gure 3).

Note: The antenna should be located at a safe distance from metal objects, electrical
equipment and reinforced concrete walls to ensure optimum functioning.

B

The AD Professional is used to receive digital signals – using a digital terrestrial decoder
or a TV with built-in digital tuner - and traditional analogue signals – on traditional TV
sets.

- Connect the Meliconi antenna cable to the socket at the back of the digital terrestrial
decoder or the television . If the decoder's antenna outlet is the F-female type, obtain
an F-male IEC-female adaptor (not included).

- Use the AC/DC adapter included in the kit to power up the antenna. Insert the cable in
the antenna power supply input and connect the adapter to the mains power supply .
Alternatively the decoder may be designed for the power supply to be provided directly
by the antenna cable (see the decoder user manual).

- Switch ON the antenna using the wheel located on one side of the antenna.

- Check that the red LED on the front of the antenna is switched ON. This means that
the antenna is powered up correctly.

- Switch ON the digital terrestrial decoder and/or the television and select the channel
required.

Positioning the antenna

Installation

3

C

If the quality of the image is poor, proceed as follows to improve reception:

- Adjust the gain by moving the selector on one side of the antenna.

- Change the position of the antenna.

- Change the horizontal/vertical orientation of the antenna until the reception improves.

Improving the reception

D

- If the antenna is not working make sure it is powered up correctly.

- The power supply function using the antenna cable may be temporarily disabled on your
decoder. If this is the case, follow the instructions on your decoder to enable this function or
connect the antenna to the power supply unit supplied.

WARNINGS

- Keep away from water: the antenna must not be exposed to drips or water spray.

Do not use in a damp atmosphere.

- Only use the power supply unit supplied with the device.

- The power supply unit must be easily accessible to enable the electric separation of the
device from the network.

- If the antenna is to be wall-mounted, fi x as shown in fi gure 3.

- The product complies with directive 2011/65/CE concerning restrictions on the use of
hazardous substance (RoHS II) in electric and electronic equipment.

- The product complies with the new low voltage (LVD) directive 2006/95/EC, the EMC
directive 2004/108/CE and the ErP directive 2009/125/CE.

2 YEAR WARRANTY - The warranty is declared null and void if the product is tampered with
or used improperly.

FEATURES AND TECHNICAL SPECIFICATIONS

- Indoor amplifi ed digital antenna

- Reception of digital terrestrial TV signals (DVB-T), DAB radio signals and analogue TV
signals on UHF and VHF (band III) bands.

- Reception range: VHF + UHF (174 ~ 790 MHz)

- FM radio + 4G LTE interference fi lter

- Very low noise emission amplifi er (< 1 dB)

- Antenna amplifi cation adjustment up to 47dB

PACKAGE CONTENTS

- Antenna

- Instruction booklet

- Antenna support

- IEC-male to IEC-male coaxial cable

- AC/DC power supply unit

Troubleshooting

This symbol shown on the product or packaging indicates that the product must not be considered
as standard domestic waste. For disposal the product must be taken to a specialist electric and
electronic waste disposal centre. Failure to dispose of this product in the appropriate way may have
negative effects. For further information concerning recycling of this product contact you local council
offi ces, local waste disposal agency or the shop where you purchased the product.

4