Meizu Technology M881H Users manual

mTouch button
Power button
Volume buttons
SIM slot
Hold the Power button for 3 seconds to turn on your phone.
1. Press the Power button to wake up the screen, or put it to sleep.
Hold an empty area on the Home screen to enter editing mode. Then you can organize the icons, change the wallpaper, and add widgets.
When the screen is packed, you can pinch it to enter editing mode.
Swipe down from the top of the Home screen to open the notification shade.
Slide an app card up to close it.
Sliding an app card down in the task manager will reveal three extended options: lock, secret, and multiwindow.
2. Hold the Power button for 8 seconds to restart the phone.
3. Press the Power button and one of the Volume Up/Down buttons simultaneously to take a screenshot.
Notice: Please use original Nano-SIM card only; when placing the card into the slot, please make sure the direction is correct.
Use the SIM eject tool (included in the box) to eject the SIM card tray. Please do not use any other sharp object.
Place Nano-SIM card into the slot and then gently insert the slot into the phone.
Press and hold a shortcut in the notification shade to directly access relevant setup options.
When you turn on the device, the soft buttons are set to the Back button, Home button, and Recents button by default.
Recents: Swipe up from the bottom of any screen to open the list of recent apps.
Back: Tap the mTouch button to return to the previous screen.
Home: Hard press the mTouch button to return to the Home screen.
Back Button: Tap to return to the previous screen.
Home Button: Tap to return to the Home screen.
Tap and hold to launch Google™. Recents Button: Tap to open the list of recent apps.
Press and hold the Power button and a Volume button to enter advanced screenshot mode. It lets you take partial or long screenshots and edit them without leaving the screen.
Directly launch the camera with a double-press on the Home button to take instant photos.
)PNFTDSFFOFEJUJOH
&OUFSFEJUJOHNPEF
/PUJGJDBUJPOTIBEF
$MPTFBOBQQGSPNUBTLNBOBHFS
4MJEFEPXOGPSNPSFPQUJPOT
)PMETIPSUDVUUPBDDFTTTFUUJOHT
/BWJHBUJPOCBS
)BSECVUUPOT
"EWBODFETDSFFOTIPU
4QFFEZBDDFTTUPDBNFSB
4*.DBSEJOTUBMMBUJPO
4UBSUVQ
#VUUPOT
)PNFTDSFFO
5BTLNBOBHFS
/PUJGJDBUJPOTIBEF
4DSFFOTIPU
$BNFSB
Flyme always makes the phone easier and more efficient. All functions in navigation bar were integrated to just one button. For better operating experience, please go to Settings > Navigation and multi-task > Navigation bar > mBack.
Google, Google Play and other marks are trademarks of Google LLC.
All other trademarks and copyrights are the property of their respective owners.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The FCC can require you to stop using your unit if such interference cannot be eliminated. MEIZU has not approved any changes or modifications to this device by the user. Any changes or modifications could void he user’s authority to operate the equipment. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.The SAR limit set by the FCC is 1.6 W/kg.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 3/8 inch (1.0 cm) from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 3/ 8 inch (1.0 cm) from your body when the phone is switched on.
2018
Loading...