Meinberg DCF77 User Manual

Technical Information
Operating Instructions
DCF77 PCI510

Impressum

Meinberg Funkuhren GmbH & Co. KG Auf der Landwehr 22 D-31812 Bad Pyrmont
Phone: ++49 52 81 - 9309-0 Fax: ++49 52 81 - 9309-30
Internet: http://www.meinberg.de Email: info@meinberg.de
March 07, 2006
Table of Contents
Impressum ............................................................................................ 2
Driver diskette ...................................................................................... 5
Readme file ........................................................................................... 7
General information about DCF77 ....................................................... 9
Overview ............................................................................................ 10
Pulse outputs ............................................................................. 10
Block diagram PCI510 .............................................................. 11
Connectors and LEDs in the rear panel ..................................... 12
Pin assignments of the 9 pin connector...................................... 13
Installing the PCI510 in your computer .............................................. 13
Aligning the antenna ........................................................................... 14
Technical specifications ...................................................................... 16
Firmware updates ...................................................................... 18
Replacing the lithium battery ..................................................... 18
CE label..................................................................................... 18
Format of the Meinberg Standard time string ............................ 19
PCI510 component layout ......................................................... 21
4

Driver diskette

5
6

Readme file

The driver diskette contains a file called „readme.txt“, which helps installing the driver correctly. The content of this file is as follows:
Installation Instructions
-------------------------
Execute Setup.exe and choose the installation directory. By default, the installation directory is: C:\Program Files\Meinberg\MbgMon
Then shut down the computer, install the Meinberg radio clock plug-in board into a free slot and reboot.
Now you are asked to install a driver. The driver file MEINBERG.INF can be found in the subdirectory Driver\PnP of the installation directory.
After the installation is complete, start the monitor program MbgMon. Start the time service, control the state of the reference clock and configure the device(s).
Copyright (C) Meinberg Funkuhren, Bad Pyrmont, Germany
7
Loading...
+ 15 hidden pages