Meiko K-54E User Manual
K-54 SERIES
Exclusive Features:
• Synchronized side-drive dual rack rail pawl-bar
system ensures complete water coverage from every
angle, even the bottom of the rack
• Large, insulated front door is spring-loaded to open
easily and STAY open, without latching
• Computer-positioned wash arms in easily-removed
manifolds. Arms and manifolds are stainless steel,
eliminating high-wear gaskets and O-rings
• Concave, slotted nozzles minimize clogging. Nozzles
are computer-positioned at varying angles to maximize
water coverage over all areas of the ware
• Powerful 3hp wash pump is 50% more powerful than
the industry standard for outstanding cleaning
• Large separation between wash and rinse (21” upper,
22” lower) avoids splashing of soiled water onto
sanitized ware
• Front-sloping wash tank for complete drainage and
easier cleaning
• External, easily-operated lever drain system makes
draining fast, safe and simple
HOT WATER SANITIZING
SINGLE-TANK
RACK CONVEYOR
WAREWASHERS
Standard Features:
• ENERGY STAR Qualified
• Capacity 239 racks per hour
• Water consumption 0.43 gallons per rack
• All 304-series stainless steel construction
• Double-wall insulated construction on front, top and
back to improve operator safety, conserve heating energy,
and reduce noise and heat loss into the dishroom
• Large, easily-removed pan strainer
• Fully automatic operation including auto-fill and autostart. Wash and final rinse are activated only when a
rack is in place to conserve water and detergent
• Powerful 3hp wash pump is vertically-mounted to be
self-draining and easily removed for servicing
• Electromechanical controls for reliability and easy
operation. Low-voltage 24VAC control circuit for
operator safety
• Easily accessible detergent and rinse aid injection ports
for fast and easy chemical dispenser installation
• Single-point electrical, water and drain connections.
Internal booster heater option adds an additional
terminal block for simpler replacement of an existing
external booster heater
• Low-level heater protection
• Pressure reduction valve (machines with internal
booster heater)
K-54 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
Options:
• Choice of two clearance heights (standard 18” or tall
hood 26”)
• Internal booster heater (steam or electric heat)
• External booster heater (steam or electric heat)
• Master disconnect
• External vent fan control
• Table limit switch
• Vent cowl collars
• Direct drive sideloader
• 90° powered loader or unloaders
• Flanged feet
• Drain water tempering kit
• Shock arrestor
• Pressure reduction valve (machines without internal
booster heater)
Models:
• K-54E: 18” vertical clearance, electric heat
• K-54S: 18” vertical clearance, steam coil heat
• K-54ET: 26” vertical clearance, electric heat
• K-54ST: 26” vertical clearance, steam coil heat
W
CR
S
CR
W
D
CR
S
K-54 Series, left-to-right - electric heat w/o internal booster steam heat (all)OR
(102mm)
7"
(178mm)
Table
lip-in
height
2' 10"
(864mm)
9-5/8"
(244mm)
3-1/2" (90mm)
recommended
4"
Control
panel
S
D
5’ 0-1/2” (1537mm)
1’ 7-1/8" (485mm)
5"
(127mm)
5-1/2"
(140mm)
CR
W
6-1/2"
(165mm)
Vent cowl
collar(s)
(optional)
4-3/4"
(121mm)
Drain
handle
8-1/8”
(205mm)
11" (280mm)
1" (25mm)
9-1/2”
(241mm)
3-1/8"
(80mm)
1' 3-1/2”
(395mm)
Overall
height,
doors
open
3
Vertical
clearance
1
7-1/2"
(189mm)
8" (203mm)
D
H
orizontal
clearance
1' 8-1/2" (520mm)
Direction
of travel
Table-to-table 4' 6" (1372mm)
Vent cowl collar centerline 5’ 3-1/2” (1613mm)
Overall 5' 10" (1778mm)
Variable Dimensions
All dimensions from floor are +/- 1/2" due to adjustable feet.
1
2
Overall
height,
doors
closed
4
3
4
5
CR
W,S
Standard height
machines
1' 4"
(405mm)
(374mm)
1' 8-1/2"
(521mm)
(395mm)
Tall hood
machines
2' 2” (660mm)1' 6" (457mm)
5' 5-7/8" (1673mm)4' 9-7/8" (1471mm)
7' 11-7/8" (2435mm)6' 7-7/8" (2030mm)
6' 5-1/8" (2435mm)5' 9-1/8" (1756mm)
6' (1829mm)5' 4" (1626mm)
1' 2-3/4"
1' 3-1/2"
2' 6-1/4"
(768mm)
Wash
section
height,
doors
closed
2
Drain
handle
K-54 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
D
Electrical
connection
5
Utility Connection Symbols
Utility ratings and connection specifications on Page 6.
S
W
CR
Drain
D W
Electrical
Ventilation
Water
Steam
S
Condensate return
CR
W
CR
S
CR
D
W
CR
K-54 Series, right-to-left - electric heat w/o internal booster steam heat (all)OR
1' 3-1/2”
(395mm)
9-1/2”
(241mm)
3-1/8"
(80mm)
Vent cowl
collar(s)
(optional)
(121mm)
Drain
handle
8-1/8”
(205mm)
11" (280mm)
4-3/4"
(165mm)
1" (25mm)
6-1/2"
S
W
CR
(140mm)
3’ 1-3/8" (948mm)
5-1/2"
Control
panel
5’ 0-1/2” (1537mm)
5"
(127mm)
4"
(102mm)
(178mm)
D
9-5/8"
(244mm)
3-1/2" (90mm)
recommended
7"
Table
lip-in
height
2' 10"
(864mm)
Overall
height,
doors
open
3
2' 6-1/4"
(768mm)
Vertical
clearance
1
1' 2-3/4"
(374mm)
1' 3-1/2"
(395mm)
1' 4"
(405mm)
1' 8-1/2"
(521mm)
H
orizontal
clearance
1' 8-1/2" (520mm)
W,S
CR
Direction
of travel
Table-to-table 4' 6" (1372mm)
Vent cowl collar centerline 5’ 3-1/2” (1613mm)
Overall 5' 10" (1778mm)
Variable Dimensions
All dimensions from floor are +/- 1/2" due to adjustable feet.
Overall
height,
doors
closed
4
1
2
3
4
5
Standard height
machines
7-1/2"
(189mm)
D
8" (203mm)
Tall hood
machines
2' 2” (660mm)1' 6" (457mm)
5' 5-7/8" (1673mm)4' 9-7/8" (1471mm)
7' 11-7/8" (2435mm)6' 7-7/8" (2030mm)
6' 5-1/8" (2435mm)5' 9-1/8" (1756mm)
6' (1829mm)5' 4" (1626mm)
Wash
section
height,
doors
closed
2
D
K-54 Series • Updated 8-10 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
S
W
CR
Electrical
connection
5
Utility Connection Symbols
Utility ratings and connection specifications on Page 6.
Drain
D W
Electrical
Ventilation
Water
Steam
S
Condensate return
CR
Loading...