Meiko DV120.2 User Manual
HOT WATER SANITIZING
DV 120.2
VARIOTRONIC DOOR-TYPE
DISH MACHINE
Meiko’s DV 120.2 Variotronic door-type machine transforms from a dish-
washer to a pot-and-pan washer with the press of a single button. Its powerful
2 Hp wash pump is regulated by Meiko’s award-winning “Mike 2” control
system, creating variable-frequency drive and wash pressures. This gives
the end user the flexibility to accommodate various soil loads, from fine
glass stemware and china to heavily soiled pots, pans and utensils.
Other unique features include Meiko’s “Active Plus” wash tank soil removal
system, “Soft Start” fine china and glassware protection system, “Aqua-Stop”
water leakage protection system, and the “Auto Safe” temperature control
system. Together with the unit’s internal booster heater and power rinse
pump, “Auto Safe” provides constant, guaranteed temperature and pressure
for the wash and final rinse cycles, regardless of the incoming water
temperature and pressures.
As with all products synonymous with the name “Meiko,” engineering
excellence, manufacturing quality and performance come to the forefront in
the DV 120.2.
Special Features:
• Variotronic Operation - Preset cycles feature
different wash pressures and cycle times. This permits
thorough, outstanding cleaning of a variety of ware.
- Cycle 1: Fineware/stemware - 7 PSI, 34 racks/hr
- Cycle 2: Dishes & glassware - 10 PSI, 54 racks/hr
- Cycle 3: Pots, pans & utensils - 15 PSI, 20 racks/hr
• Mike 2 Programmable Controller - advanced micro-
computer technology for service diagnostics and enduser dishmachine settings
• Built-in Booster Heater with Power Rinse Pump Guarantees constant pressure and temperature
during final rinse
• Double-wall construction keeps heat inside the
machine, reducing energy consumption and heat loss
into the dishroom environment
• Active Plus - Double filtration of wash water removes
food soil, improving washing efficiency and saving
detergent while easing cleaning chores
• Auto Safe - Guarantees minimum required wash and
rinse temperatures regardless of incoming water
temperature
• Soft Start Wash Pump - Protects dishes and glasses
from chipping or breaking
• Aqua-Stop - Automatically turns off incoming water
supply should internal water leakage occur
DV 120.2 • Updated 7-05 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
Standard Features:
• Three variable programmed time/pressure cycles
• Maximum rack capacity of 54 racks per hour
• Utilizes only 1.13 gallons of rinse water per rack
• Fully automatic operation - automatic fill, automatic
start, and automatic reset
• Pumped drain for both floor and wall drain applications
• Self cleaning cycle - automatic cleaning of the wash
chamber following machine shutdown
• Stainless steel non-clogging wash and rinse arms
• Sloped ceiling is safer for the user and prevents
dripping of soiled water onto sanitized ware
• Front mounted controls with digital cycle and
temperature displays
• Powerful 2 Hp wash pump
• All 304 and 316L stainless steel construction for
advanced corrosion resistance
• Type A air gap system eliminates need for vacuum
breaker
• Field-convertible for use in either straight-through or
corner applications
Dimensions Legend
9 3/16"
11" (279mm)
18 3/4" (476mm)
25 3/16" (640mm)
6 1/2" (165mm)
34" (845mm) table lip-in height
59 3/16" (805mm)
77 15/16" (1980mm)
(233mm)
vertical clearance
17 5/16" (440mm)
If drain hose is
positioned as
a water trap,
topofloop
may be no
higher than
24" from floor
Electrical terminal block
Strain relief provided at lower
rear of machine. Adequate
slack in the wiring should be
provided to allow the machine
to be movedfor servicing.
Fresh water connection
3/4" male garden hose supply
connection is required.
Supplied hose extends 4' 7"
from machine connection.
Drain connection
Requires indirect connection to
1-1/2" drain pipe (wall or floor).
Supplied hose extends 4' 7"
from machine connection.
Front Elevation Side Elevation
Plan View
7 9/16"
(192mm)
1 1/4"
(32mm)
12-9/16"
(319mm)
5 7/8" (150mm)
1 1/4"
(32mm)
25" (635mm)
27-1/2" (699mm)
2 3/8" (60mm)
13" (330mm)
29 1/2" (750mm)
2 3/4" (70mm)
Rack Clearances and Table Positioning
2 1/2"
(64mm)
7"
(178mm)
20" (508mm)
rack clearance
2 1/2"
(64mm)
(317mm)
20" (508mm)
rack clearance
12 1/2"
Rack centerline
(corner installation)
Rack
centerline
12 1/2"
(317mm)
2 1/2"
(64mm)
17"
12 1/2"
(432mm)
(318mm)
DV 120.2 • Updated 7-05 Meiko • 917 Airpark Center Drive • Nashville, TN 37217 • (800) 55-MEIKO • FAX (615) 399-6620 • www.meiko.us
Loading...