Meiko CS70 User Manual
The clean solution
Special Features:
• CS 70 - advanced microprocessor technology for
maintenance and end user dishmachine settings
• Auto Prime - Timed priming function on all chemical pump s
• T emp Safe - User-selectable temperature-based automatic
drain/refill feature to ensure desired wash and rinse
temperatures
• Delime Cycle - Automatically fills machine, signals for
delimer, delimes for five minutes, then drains and rinses
machine
Standard Features:
• ENERGY STAR Qualified
LOW TEMPERATURE
CHEMICAL SANITIZING
DOOR-TYPE
DISHW ASHER
• Capacity 40 racks per hour (50 racks per hour with userselectable 72 second cycle)
• Water consumption 1.08 gallons (4.09 liters) per rack
• V ariable programmed time cycles - 90 and 72 seconds
• Fully automatic - automatic fill, automatic start, and automatic
drain
• Reversible accumulator drain for left or right connections
• Stainless steel wash and rinse arms with removable end caps
• Front-mounted controls with digital cycle and temperature
displays
• 3/4 hp (0.56 kW) stainless steel self-draining wash/rinse
pump
• All 304 stainless steel construction for corrosion resistance
• Wraparound door construction
• Field-convertible for use in either straight-through or corner
applications
• Digital cycle counter
• Type A air gap system eliminates need for vacuum breaker
Options:
• False panel for corner and straight
applications
• Pumped drain for wall drain
applications
• Flanged, bolt-down feet
• Proof of delivery window provides a visual indication that
chemicals are being dispensed
• Diagonal rack support
Page 1 • CS 70 • Updated 7-14 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • www.meiko.us • sales@meiko.us
This dishwasher is compliant with the Reduction of
Lead in Drinking Water Act (2011) amendment to the
Safe Drinking Water Act (SDWA).
Dimensions Legend
7 7/8"
(200mm)
18 1/4" (464mm)
25 1/2" (648mm)
17 1/4" (438mm)
77 3/4" (1975mm)
W
59 3/16" (805mm)
W
D
1
D
2
D , D
12
11 1/4"
(284mm)
34" (845mm) table lip-in height
22 1/4" (565mm)
20 7/8" (530mm)
Electrical terminal block
Strain relief provided at lower
rear of machine. Adequate
slack in the wiring should be
provided to allow the machine
to be moved for servicing.
Fresh water connection
W
Requires hookup to 1/2"
FNPT fitting.
Drain connection
D
1
required, either position may
or
be used)
D2
Requires indirect connection
to 2" drain pipe (wall or floor).
Gravity drain - must maintain
downslope.
Machine is shipped with drain
at position D . The machine
may be be reconfigured (if
required) at time of installation
to use position D .
(one
1
2
D
1
25" (635mm) chassis
28 1/8" (715mm)
Closed 2 5/8" (66mm)
W
D
2
Open 3 3/8" (86mm)
13 1/4"
(335mm)
16 1/2" (419mm)
26 1/2" (673mm)
Max 29 7/8" (759mm)
20 5/8" (523mm)
Rack Clearances and Table Positioning
7" (178mm)
17" (432mm)
C
L
12 7/8"
(327mm)
20" (508mm)
rack clearance
2 7/8" (73mm)
12 1/2"
(318mm)
Rack
centerline
C
L
12 1/2"
(318mm)
All dimensions from floor +/- 1/2"
Dishtabling shown for dimensional purposes
only.All dishtabling to be provided by others.
(13mm) due to adjustable feet.
Page 2 • CS 70 • Updated 7-14 MEIKO • 1349 Heil Quaker Blvd. • LaVergne, TN 37086 • (800) 55-MEIKO • www.meiko.us • sales@meiko.us
Loading...