Meiji Techno PKL Instruction Manual

Model PKL
Stereo Microscope Incident & Transmitted Light
LED Pole Stand
Instruction Manual

Table of Contents

1.0 Introduction

1.1 Product Features

1.2 General Safety Guidelines

1.3 Warning/Caution symbols used in this manual

1.4 Intended Product Use Statement

1.5 Product Safety Information

1.6 Warranty Notes

2.0 The Stand and its Components

2.1 Set Up

3.0 Operation

3.1 Incident Light Operation – Brightfield

3.2 Transmitted Light Operation – Brightfield

4.0 Maintenance and Cleaning

5.0 Troubleshooting

5.1 Replacing the mains fuse

6.0 Storage

7.0 Accessories and Replacements Parts

8.0 Physical Dimensions

Model PKL Microscope Pole Stand

1. Introduction

The Meiji Techno Model PKL Microscope Pole Stand has a low profile ergonomic shaped
design that is very comfortable to use and offers excellent stability. All of the controls are
ergonomically positioned to provide comfort and extended ease of use for the operator. An
adjustable integrated LED vertical illuminator with a variable intensity control and
automatic voltage sensing power supply provides excellent specimen illumination and
contrast. The PKL is designed to meet your most diverse needs for stereo microscopy.

1.1 Model PKL Features

• CAD Designed

• Low Profile Compact Footprint

• Low Positioned Ergonomic Controls

• Smooth Operating Course Focus Block with LED Incident Illuminator

• Rugged Cast Alloy Construction

• Brightfield and Optional Polarized Light Observation Modes

• Integrated LED Transmitted Light Illumination System

• Wide Variety of Viewing Heads Available

• Automatic Voltage Sensing Power Supply with detachable power cord

• Wide Range of Accessories

1.2 General Safety Guidelines

Meiji Techno products are designed for safe operation under normal operating conditions.
The instrument and accessories described in this manual have been built and tested
according to industry safety standards for electronic laboratory instruments. Incorrect
usage or non-conformance to operating instructions can cause personal injury or damage
to equipment or property.

1.3 Warning/Caution Symbols Used in this Manual

You must be aware of all safety issues when you install and operate this microscope
system. Several warning and caution symbols are listed below. These symbols are used
throughout this instruction manual. For your safety, be sure to follow all instructions
associated with the symbols listed below.

Possible electrical shock hazard exists

Disregarding instructions marked with this symbol may lead to serious

injury or property damage.

1.4 Intended Product Use

Product Disclaimer: This product is designed and intended for use only as a stereo

microscope fixturing system. Modifying this product in any way for use in any situation
other than the original and intended product design will automatically void the warranty.
In no event shall Meiji Techno be liable to any person for any incidental, indirect or
consequential damages, arising out of or in connection with the use or performance of a
modified or altered product.

1.5 Product Safety Information

This microscope stand is not intended to be used in the immediate vicinity of
water or a water outlet or placed in any location where water may penetrate the instrument.
Water penetration may result in electrical shock or death. Choose only a suitable
environment for your microscope stand.

Do not subject any microscope system to extreme temperature fluctuations.
Disassembly of the instrument may result in electrical shock, injury or death, equipment
damage, loss of warranty coverage or may create other potential hazardous consequences.

Always turn off the power switch and disconnect the cord from the power supply when
replacing fuses, doing general maintenance or cleaning of the stand.

DO NOT OPERATE UNLESS THE UNIT IS PROPERLY GROUNDED!

Use only the specified power cord in a well grounded socket. Do not use in an
ungrounded power receptacle or in cases where there is a break in the ground conductor
or damage to the electrical wiring.

Only fuses of the specified type and rating (1 amp 250V FB) are to be used as
replacements. Switch off the power and disconnect the power cord before replacing fuses.
Use of a non-compliant fuse may result in electrical shock or severe damage your
equipment.

Modifying the product in any way or unauthorized attempts to disassemble or use the
instrument for applications other then its intended design will automatically void the
warranty.

1.6 Warranty Notes

Meiji Techno warrants this product against defects in material and/or workmanship for the life of
the instrument from the date of the original purchase to the original purchaser. Meiji Techno will
repair or replace, at its option, any instrument which under normal conditions of use and service
proves to be defective in material or workmanship. No charge will be made for labor or materials
with respect to defects covered by this warranty, provided all repair work is done by Meiji Techno.
This warranty does not cover expenses incurred in the removal or reinstallation of any products,
whether or not proven defective. Replacement or repairs furnished under this warranty are subject
to the same terms and conditions of the original warranty. This warranty supersedes any other
warranty and is subject to the following terms and conditions:

WARRANTY

Warranty of Meiji Techno’s product extends to the original purchaser of the product and
is not transferable.

WARRANTY DURATION

Meiji Techno warrants this product against defects in material and/or workmanship for
the life of the instrument from the date of original purchase to the original purchaser. The
electrical warranty is one year.

OWNER’S REGISTRATION CARD

Return of the owner’s registration card by the original purchaser within ten (10) days
after the original purchase is a condition precedent to coverage under this warranty. Meiji
Techno will at its option accept written proof of purchase from the original owner in lieu
of a product registration card.