Meiji Techno EMF, EMT, EMTR, EMX Instruction Manual

EMF EMT EMTR EMX

Series

STEREO MICROSCOPES

INSTRUCTION

MANUAL

2 - 3

4
4
4

5 - 7

5
5
6
6
7
7
7

7 - 8

7
8
8

9
9
9
9

10-13

NOMENCLATURE AND FUNCTION

THE USE AND CARE

Unpacking

How to Rotate the Head

OPERATION PROCEDURES

How To Operate Illuminators

Focusing Capability

Precise Focus On Specimen

Focusing Procedure

Interpupillary Distance Adjustment

Changing The Magnification On EMT, EMTR And EMX Models

How To Use Eyeshield

PHOTOGRAPHY AND TELEVISION

Photography

Camera Operation

Television

MAINTENANCE AND CARE

Bulb Replacement

Care

Cleaning

EM Series SYSTEM DIAGRAM

1

CONTENTS

INSTRUCTION

MANUAL

EMF

EMT

EMTR

EMX

Series

2

NOMENCLATURE AND FUNCTION

MEIJI EMF EMT EMTR EMX Series
STEREO MICROSCOPE

Set Screw

Photo Tube

Focusing Knob

Clamp

Collar Set Screw

Pilar Collar

Dimmer Switch
(PBH Stand)

Eyepieces
with Eyeshield

Diopter
Adjustment Ring

Prism House

Turret Objective

Incident Illuminator
Lamp Cover

Stage Clips

Glass Stage Plate

Stage Plate Set Screw

Base with Transformer and
Transmitted Illuminator built in

Selector Switch

(I)

(T)

(IT)

Incident Light

Transmitted Light

Incident and
Transmitted Lights
simultaneously

Lever

for switching the
image from one of
the binocular
eyepieces vertically up
to the film plane

Model EMT-1 with SWF10X

mounted on PBH (PB) Stand

EMTR-2
Trinocular Stereo Body
Eyetube Inclination : 45

。

Eyepieces
with Eyeshield

Diopter
Adjustment Ring

3

Set screw

Eyeshield

Focusing Knob

Clamp

Collar Set Screw

Base

Eyepieces
with Eyeshield

Diopter
Adjustment Ring

Prism House

Fixed objective

Stage Clips

Stage Plate Set Screw

Reversible Stage Plate
Black / White

Model EMF-1 with SWF10X

mounted on P Stand

Model EMX-1 with SWF10X

mounted on PX Stand

The MEIJI EM Series (EMF,EMT, EMTR and EMX Series) Widefield Stereo Microscope consists of two
converging compound microscopes which are combined as a unit to focus simultaneously on the same
field of object. Each body tube is fitted with a set of Porro prisms to erect the image and matched
achromatic objectives and super widefield eyepieces to furnish a very wide flat field of view. Each eye
observes the object from a different perspective, consequently, deep stereoscopic relief is produced in
the fused image.

This MEIJI EM Series Stereo Microscope widely is used for various applications such as assembly and
inspection of semiconductor devices, and as an indispensable part in bonding machines and
microtomes, as well as for educational, clinical and research purposes.
This series stereo microscope is used as follows:

UNPACKING

This EM series stereo microscope is usually supplied in a styrofoam containers. Remove the
instrument from its container by grasping the stereo microscope body and supporting the base with the
other hand.

Place the instrument on a firm flat table. (No packing material should be discarded until the instrument
has been checked, since some may contain accessory equipment which can not be attached to the
instrument.)

When supplied in a wooden cabinet, remove the instrument from the cabinet by unscrewing the two
large screws which are used to fasten the instrument to the cabinet through the bottom of the cabinet,
with a coin or large screwdriver.

If you ordered zoom stereo body and stand separately, loosen the set screw and insert the body into
the holder then tighten the set screw after setting at the desired position.

How to Rotate the Head:

A special feature of this series stereo microscope is the rotation of the stereo
microscope body through 360°so that it can be utilized either in the conventional
position or with the stage nearest to the observer. To rotate the stereo microscope body,
loosen the set screw.

4

THE USE AND CARE OF

MEIJI EM Series

"MEIJI" EMF, EMT, EMTR AND EMX SERIES

WIDEFIELD STEREO MICROSCOPE

Insert the eyepieces
into eyetube

Stereo body can
rotate 360 degree
on the holder

Holder

Set screw