MeiDong Acoustics SE7 User Manual
SE7 ANC Wireless Headphones
User Guide
EN
What’s in the box
- SE7 ANC Wireless Headphones
- Carrying Case
- USB Charging Cable
Overview
Connections
3.5mm 6.5mm
3.5mm to 6.5mm Audio Converter
- 3.5mm Audio Cable
- User Guide
- Warranty Card
Noise cancellation on/off switch
Volume up / skip backward button
Power / Bluetooth / Call control button
Volume down / skip forward button
Audio jack
USB charging port
Airline Headphone Adapter
LED Indicators
Indicator Light Display System status
Solid green Noise cancellation ON
Indicator Light Display
Flashing blue and red alternately
Flashing red
Solid red
Solid blue
Flashing blue slowly
System status
Power on & In pairing mode
Low Battery
Charging in Process
Fully Charged
Paired
Get Started
To power on: Press and hold for five seconds.
You hear the power-on tones.
Tip: Once powered on, the white LED flashes
blue and red alternately.
To power off: Press and hold for three seconds.
You hear the power-off tones.
Use Your Headphones
Music Control
Task Button Operation
Volume up / Skip backward Press once / Press and hold
Volume down / Skip forward Press once / Press and hold
Clear the headset pairing list Press and hold for 3 seconds
Call Control
Task Button Operation
Pick up / hang up a call Press once
Reject an incoming call Press and hold for 1 second
Bluetooth Connection
Wear Your Headset
CARE AND MAINTENANCE
- Do not drop, crush, bend or apply excessive force to the device.
- Do not expose your device to moisture, extreme or prolonged heat, cold,humidity, or other
adverse conditions. Avoid storing it in damp, humid or wet places, as it is not waterproof.
- Clean the unit with a soft cloth or damp chamois leather. Never use solvents.
- The Unit can only be opened by qualified personnel.
- This device contains magnets. Keep magnetic field sensitive products such as credit cards and
video screen away from this device to avoid damage.
Note: The devices must be within range (32.8 ft. or 9 m) and powered on.
1.Turn on the headset. If connecting for the first time, the headphone will
enter the pairing mode automatically after it is powered on.
Tip: Once powered on, the white LED flashes blue and red alternately.
2. On your mobile device, enable the Bluetooth feature.
Tip: The Bluetooth feature is usually found in the Setting menu.
Detachable Earcups
Adjust the headband to fit your head.
3. Select your headphones from the device list.
Choose “SE7” to connect
Detachable, earcups allow for easy replacement and cleaning.
Hearing Safety
SE7
Tip: Once paired, you hear “Paired” and see the indicator flash blue slowly.
Danger
• To avoid hearing damage, limit the time you use headphones
at high volume and set the volume to a safe level. The louder
the volume, the shorter the safe listening time is.
FAQ
Q1: My Bluetooth headphones do not switch on.
●The battery level is low. Charge the headphones.
Q2: I have difficulty to pair my device to the headset.
●Make sure the headset is powered on.
●Make sure your device’s Bluetooth feature is on.
●Make sure the headset is not paired by another device. If it is, turn the headset on and press
‘+’ (volume up) and ‘-’ (volume down) at the same time to clear the headset pairing list. Then,
pair again.
●Move your device closer to the headphones and away from any interference or obstructions.
Q3: My Bluetooth headphones are connected to a Bluetooth enabled device, but
music can not play on my headphones.
●Refer to the user manual of your device. Select to play through the headphones.
●Some of the music/video players may need you to go to the settings and select to play
through the headphones from output device list.
Q4: The audio quality is poor and crackling noise can be heard.
●The Bluetooth device is out of range. Reduce the distance between your headphones and
Bluetooth device, or remove obstacles between them.
EN-1 EN-2 EN-3 EN-4 EN-5
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
Loading...