Meicheng RYK-9122 User Manual

Download

Ver.: 1.0, P/N: R040110/2

USER MANUAL

Mini Security Recorder

RYK-9122

Contents

1. SAFETY PRECAUTIONS.................................................................................................................... 1

2. FEATURES........................................................................................................................................... 2

3. PACKING LIST.................................................................................................................................... 3

4. NAME and FUNCTION of EACH PART............................................................................................ 4

4.1 Front View.......................................................................................................................................4

4.2 Side View........................................................................................................................................5

5. Basic Configuration............................................................................................................................... 6

6. Operation............................................................................................................................................... 7

6.1 Power On.........................................................................................................................................7

6.2 Live Mode....................................................................................................................................... 7

6.3 Record Mode................................................................................................................................... 8

6.4 Playback Mode................................................................................................................................ 9

6.5 PC Playback .................................................................................................................................. 10

6.6 SD Card Maintenance ................................................................................................................... 11

6.7 How to Download the Updated Software..................................................................................... 11

7. MENU SETUP.................................................................................................................................... 12

7.1 Main Menu....................................................................................................................................12

7.2 Date/ Time.....................................................................................................................................12

7.3 Motion Detection........................................................................................................................... 13

7.4 Manual Record & Schedule Record.............................................................................................. 14

7.5 SD Card Options........................................................................................................................... 15

7.6 System Status ................................................................................................................................ 15

7.7 Factory Default.............................................................................................................................. 16

8. TROUBLE SHOOTING..................................................................................................................... 17

9. SPECIFICATION................................................................................................................................ 18

The author assumes no responsibility for any errors or omissions that may appear in this

document nor does the author make a commitment to update the information herein.

It is advised to read the Safety Precaution Guide through carefully before operating the

product, to prevent any possible danger.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN!

CAUTION :

TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT OPEN COVERS (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICIN G TO QUALIFIED

SERVICE PERSONNEL.

1. SAFETY PRECAUTIONS

WARNING: This symbol is intended to alert the user to the presence of un-insulated “ dangerous voltage”.

CAUTION: This symbol is intended to alert the user to presence of important operating and

maintenance (Servicing) instructions in the literature accompanying the appliance.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office , your household waste disposal service or the shop where you pu rchased the pr oduct.

Do not Plug and unplug the power cord, it may result product malfunction. Do not install the product in an environment where the humidity is high.

Unless the product is waterproof or weatherproof, otherwise poor image quality may occur. Do not drop the product or subject them to physical shocks.

Except for vandal-proof or shockproof product, otherwise malfunctions may occur. Never keep the product to direct strong light.

It can damage the product. Do not spill liquid of any kind on the product.

If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that corrode the electronic components.

Do not install the product in extreme temperature conditions. Use the camera under conditions where temperatures are between 5∘C (41∘ F ) ~ 4 5 ∘C.(113∘ F ) . B e e s p e c i a l l y careful to provide ventilation when operating under high temperatures.

2. FEATURES

z The DVR supports NTSC or PAL video system, and auto detects video loss. z The DVR is built-in with MPEG4-SP video and G.726 audio codec. It supports 1 channel

video and 1 channel audio recording and playback operation.

z Audio/ Video data are recorded directly on the SD card with FAT16/ 32 file system and

ASF file format. Simple data backup method to a PC.

z Audio/ Video data are recorded directly as ASF file format. You can view the data straight

from your PC, and playback those ASF files with popular media players.

z For 1 GB SD card, the record time is about 5 hours at Standard Quality for NTSC: 30 fps

@ 352 x 240 and PAL: 25 fps @ 352 x 280.

z The DVR supports: manual, motion detection, and schedule recording mode with

independent video size, quality, and frame rate set up.

z For motion detection, multiple detection blocks and appropriate motion trigger level can

be set up.

z Support key lock function. z Use anywhere, the device supports either DC power adaptor or nickel metal hydride

(NiMH), alkaline batteries.

3. PACKING LIST

Check to make sure all of the items shown below are included in your Portable Security Recorder Kit. If something is missing, contact your dealer as soon as possible.

Item Description Item Picture

QTY

Mini Portable Security Recorder

Audio/ V ideo Cable

Power Adaptor DC 12V/ 410mA Input: AC 100~240V Output: DC 12V/ 410mA

Manual

Quick Guide

4. NAME and FUNCTION of EACH PART

4.1 Front View

Menu/LockRecPlayPower

Stop/Exit Rec

MenuPlay/PauseEnter Display

Menu/LockRecPlayPower

Stop/Exit Rec

MenuPlay/PauseEnter Display

2 3

12 13 14

15 16

17 18

(1) Power LED ： Power Indicator (2) Play LED ： Play Indicator (3) Menu/ Lock LED ： Menu / Key Lock Indicator (4) Rec LED ： When SD card is writing data during recording, record

indicator will flash slowly. When SD card is “read only”, recording function is disabled and the record indicator will flash quickly.

Warning on Unusual Operation Record function is invalid when SD card is not inserted,

full, damaged, or setup to “read-only”, and number (2) (3) (4) LED indicator will flash quickly; press《Enter«》

utton

to release the warning. (5) Stop/ Exit Button ： Stop Record or Play/ Exit Menu (6) Rec Button ： Manual Record Button (7&8) SUp Button

TDown Button

： Cursor Movement Up/ Down to select item in the Setup

Menu. (9&10) W/ – Left Button

X/ +Right Button

： Playback – Press to Fast Forward or Fast Rewind.

Step Playback – Press to Step Playback. Menu – Press to Increase/ Decrease Setup Value. (11) «Enter Button ： Sub-Menu – Press to enter Sub-Menu.

Press《Enter«》button to release the warning.

Key Lock/ Unlock Switch Monitoring/ Playback – Simultaneously pressing《Enter«》

first and then《Menu 》button to switch the Key Lock

Function “ON/ OFF”. (12) Display Button ： Status Line ON/ OFF switch. (13) Play Button

Pause Button

： Monitoring – Press to Playback.

Playback – Press to Pause. Pause – Press to Playback. (14) Menu Button ： Press to enter Menu Setup.

4.2 Side View

(15) AV IN: Audio/ Video Input

Video In (yellow)

Audio In (white)

AV In

Audio/V ideo IN: 3.5 m m ∅ jack for audio/ video line in. (16) AV OUT: Audio/ Video Output

Video Out (yellow)

Audio Out (white)

AV Out

Audio/V ideo OUT : 3.5 mm ∅ jack for audio/ video line out. (17) POWER: DC/ Battery Power Switch (18) DC 12V IN: 12V/ 410mA Power Input (19) SD Card Slot (20) Battery Compartment Cover

15 16

17 18

5. BASIC CONFIGURATION

1. Power: Use the power adaptor supplied, nickel metal hydride (NiMH), alkaline

batteries.

2. Video System: Connect the camera, the device auto detects NTSC/ PAL video system

(the output video system will be setup the same as its input video system). Without connecting the camera, the video system setup will be the same as its previous setup.

3. Power Switch: Switch to DC when using the supplied power adaptor or switch to

BATT when using battery.

Please use appropriate SD Memory Card (256MB or above), otherwise the recording

data will present intermittent conditions.

Withdraw SD card only when the device is switched off or currently under main menu

display, otherwise system may be unstable or data stored in the SD card may be damaged.

6. OPERATION

6.1 Power On

1. The power switch is situated on the right side of the device, switch to DC when using the

supplied power adaptor or switch to BATT when using battery.

NOTE: Each time after power-on, the system auto-detects its peripherals. When the REC LED flashes

indicates that the SD card is proceeding testing (complete boot time is several seconds) When an image file error has been detected, the system will initiate auto repairing.

2. After power on, the system auto enters live monitoring. When the system is currently

under schedule recording, it auto enters record mode.

3. “ ” icon shown on the status line, indicates that SD card is operating normally.

4. When SD card is not inserted or problem occurs on the SD card. Play, Menu, and Rec

indicator will flash quickly. Please re-format before proceeding.

5. You can play while the SD card is “read only”, but you cannot record; and Play, Menu,

and Rec indicator will flash quickly.

6. When SD card is writing data during recording, record indicator will flash slowly.

7. Simultaneously pressing “Enter” and “Menu” button to switch the Key Lock Function

“ON/ OFF”. When function key is locked, key lock indicator will lit.

8. After power-loss the system auto returns to the previous recording mode.

Do not withdraw the CF card while booting. It may destroy the data stored within the CF card.

6.2 Live Mode

Live mode is the default setup after system start-up.

Monitoring Display:

Press《Display》button to switch between LCD display mode and OSD info.

c Time Display: System Date and Time. d Record Status Display: Manual Record Parameter.

： Record Resolution, please refer to【7.4 Record Setup】for VIDEO SIZE setup. ： Record Quality, please refer to【7.4 Record Setup】for VIDEO QUALITY setup. ： Audio Off Record, please refer to【7.4 Record Setup】for AUDIO RECORD

setup.

2 0 04/02/01 0 8:1 0:03

　3 SD Card Status:

：

SD Card has not been inserted or malfunction.

：

SD C a r d i s proceeding file testing.

：

SD Card is functioning normally.

C ：

Disk full and overwrite record.

When SD card is not inserted, record and playback function is inapplicable, but

monitoring is applicable.

6.3 Record Mode

1. Start Record: 3 Types of recording mode.

(1) Manual Record: Suitable to record at anytime. Press《Rec 》button, to enter manual

recording status (start recording). For more information, please refer to【7.4 Record Setup】.

(2) Motion Detection Record: Suitable to record, when there are severe image changes.

Motion detection triggers schedule recording, but it will only start recording when the variation exceeds the alarm limitation value. For more information, please refer to【7.3 Record setup】and【7.4 Record Setup】.

(3) Continuous Record: Suitable on few constant frame recording or on long-term

continuous recording. For more information, please refer to【7.4 Record Setup】.

2. Stop Record: Press《Stop》button, stops manual recording only. Enter《Play》or《Menu 》

schedule recording (Motion Detection and Continuous Record), all kinds of recordings will be stopped. To continue recording, please follow the methods below to restart recording.

Manual Record

Repress《REC 》button.

Schedule Record

Motion Detection Record

After exit playback or menu mode, whether the setup has been changed or not, the system will auto re-check the record schedule setup again.

3. Record Display:

: Indicates recording is in progress.

：Manual Record

：Schedule Record ：Motion Detection Record

2 0 04

/02/

01 0 8 : 1 0 : 03

4. The event status is determined by the sys tem record ing, accord ing to the order of priority.

5. The order of priority: Manual Record, Motion Detection and then Schedule Record.

6. Different recording modes may have different kinds of setups. Basic setup: video size,

recording frames, video quality, and audio recording. When different recording modes are triggered, the system starts recording according to the different setup. This kind of design provides flexibility to ensure efficient recording time and quality. Example: Work hour from 8:00am to 6:00pm, setup「Schedule Record」to low video quality with less recording frames to extend the recording time. And off work hour, setup 「Motion Detection Record」 to enable high video quality with the highest recording frames, when an event occurs.

7. Video or audio may be recorded into the SD card (SD card is purchased separately).

When the video has been stored, the record LED flashes indicates that the system is currently loading the file into the SD card.

Do not withdraw the SD card while recording. It may destroy the data stored within the

SD card. Power loss during recording results incomplete videos or errors. Video loss during recording, the system stops recording, backups the files, and

when the videos are normal again, the system will continue recording.

6.4 Playback Mode

Selectable Playback format: Continuous Playback and Searching Playback.

(1) Normal Playback: Press《Play/ Pause》button to playback accordin g to the SD card file

order recorded.

2004/02/01 08 : 10:03

 ： Normal speed playback.  ： Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32).

Press《Play/ Pause》button to return to normal speed playback.

 ： During playback, press《Play/ Pause》button to pause playback and

press it twice to return to playback status.

 ： During pause, press《》or《》button to step back one frame or to step forward

one frame and press《Play/ Pause》button to return to normal speed playback.

Display ： Switch to 「Hide Status Info.」, 「Hide LCD Monitor」, and 「Display LCD

Monitor and Status Info.」.

Press《Stop》button to stop playback function and to return to live status. (2) Search and Playback: Enter MENU and select【SEARCH AND PLAY】item.

SEARCH AND PLAY

■■

DATE F I LES

2003/12 / 25 5 2003/12 / 26 15 2003/12 / 27 2 2003/12 / 28 3 2003/12 / 29 7

DATE PAGE : 1 / 3

FI LE:038

TIME:09:18:09

1 File directory shows dates and the amount of contents under the directory. The user

may press《》or《》button to move the cursor up or down.

2 Current location page. 3 Each color distinguishing different recording events, the user may press《 / +》

or《- / 》button to move the cursor left or right and immediately shows the first image of the highlighted event on the screen display background.

4 Displays the time highlighted by the event bar. 5 Blue: Manual Record/ Red: Motion Detection Record/ White: Schedule Record. 6 Press《ST OP》button to stop playback and the system will return to【SEARCH and

PLA Y】selection and enables the user to select the prefered input source.

The device supports playback only to images recorded by our device, other ASF video

files are not guaranteed.

6.5 PC Playback

1. The device uses SD card as its main storage. User may read the data stored in the SD

card from the computers that supports SD card reader device.

2. All files (under DVMPG4 folder) has approximate size of 1MB and file names are

ordered according to recorded times (sequence).

File Playback:

User may use Microsoft®－Media Player or DivX－DivX Player (http://www.divx.com/) to playback video files.

Backup Playback: may playback backup files from the computer (copy files to the SD

card under \DVMPG4 folder).

When first time using Media Player to playback, it requires the most updated decoder

from the Microsoft® software website.

6.6 SD Card Maintenance

1. The device supports only FAT16/ 32 file system; therefore it is unable to determine other file systems. Please format the SD card (enter【MENU/ SD CARD OPTIONS】and select

“Format”).

2. The system supports only partial SD card file system repair. The system is unable to detect any file system damage, therefore please format the SD card (enter【MENU/ SD CARD OPTIONS】and select “Format”).

6.7 How to Download the Updated Software

1. Use the SD card to update your system firmware.

2. Please follow the steps below to update the software: (1) Copy the new system firmware into the new directory of the SD card from your

computer.

(2) Insert the SD card; switch off the main power and then restart. (3) Wait for 5 to 6 seconds, the system update will be completed and returns back to live

mode.

Do not withdraw the SD card while booting, when power-loss occurs while proceeding

step (3), please repeat step (2) and (3).

7. MENU SETUP

7.1 Main Menu

MA I N MENU

■

SEARCH AND PLAY > SET DATE / T I ME > SET MOT ION DETECT > MANUAL RECORD > SCHEDULE RECORD > SD CARD OPT I ONS > SYSTEM STATUS > FACTORY DEFAULT >

1 MAIN MENU: Item subject. 2 Menu Layer Indication: The device consists of three menu layers.

3 MENU Content: Basic Menu Operations.

Press《▲》or《▼》button, to move the highlight-bar and the cursor (Z). Press《MENU/ ENTER 》button, to enter the sub menu (＞).

Press《STOP》button:

 Under second or third menu layer, the system will return to the previous

menu layer (second layer to first layer or third layer to second layer).

 Under main menu (first menu layer), the system will enter live mode.

Press《》or《》button, to increase or decrease the setting values that has been highlighted.

NOTE: All words underlined and bold indicates「Default Value」.

7.2 Date/ Time

DATE / T I ME

■■

DATE FORMAT : Y / M / D SET DATE: 2004 /01/01 SET T IME: 00:00: 00

1 2

1 Date Format: Y / M / D M / D / Y D / M / Y

d Date/ Time Adjustment: Year settings are from 2000 to 2099.

■

: First Menu Layer (Main Menu)

■■

: Second Menu Layer

■■■

: Third Menu Layer

7.3 Motion Detection

1. Window setup:

MD ARE A

■■■

MODE : C E L L E D I T

MODE : PL A Y

1 2

1 Detection Cell: Whole screen is divided into 22x15 square cells. 2 Detection Block: Two or more cells form a block. 3 Cursor: Press《PLAY》button to switch to Select/ Edit mode. 4 Detection Block.

2. Cursor Movement: Press《PLAY》button, switch cursor to setup mode (cursor color is black). Press《▲/ ▼/ / 》button to move the cursor freely.

3. Detection Area Setup:

(1) Press《PLAY》button to select edit detection block function.

FUNCTION DESCRIPTION

CELL EDIT

Single detection cell setup (detection/ non-detection)

DEL BLOCK

Disable a block.

DEL ALL

Disable all cells.

ADD BLOCK

Enable a block.

ADD ALL

Enable all cells.

(2) Press《PLAY》button, switch cursor to edit mode (cursor color is pink). Press《▲/ ▼

/ / 》button, follow step (1) to change the size of the detection block.

(3) Detection area is displayed by color red and non-detection area by color blue. Press

《Enter«》to enable/ disable the detection area.

4. When a detected object is moving in the detection area, detection area turns from red to

transparent (color turns from red to transparent indicates moving status).

5. Video Detection Block Sensitivity Setup:

Changing the alert value setup may affect the recording sensitivity of the Motion Detection.

MD SENSITIVITY

■■■

MD ENERGY : 0% MD T HRES HOL D : 1 0%

THRESHOLD L :←R:

→

Live Video

THRESHOLDENERGY

2 3

　Sensitivity Bar

：

Color black indicates image variable value and color red indicates the MD threshold.

　 MD Energy

：

Current image variation value.

　 MD Threshold

：

Press《》or《》button, to change the motion detection threshold value.

7.4 Manual Record & Schedule Record

Selectable manual or schedule recording, basic setups are shown below:

1. MANUAL RECORD: Press ( Rec) button to start recording.

MANUAL RECORD

■■

VIDEO SIZE:704X240 FRAME RATE : 12FPS QUAL I TY :MED I UM AUD I O :ON

2 3

　c Video Size/ Frame Rate:

NTSC

352x240 704x240 704x480

FRAME RATE (MAX)

30 fps 24 fps 12 fps

PAL

352x280 704x280 704x560

FRAME RATE (MAX)

25 fps 20 fps 10 fps

　d Image Quality:

HIGH QUALITY HQ

Using high recording quality (More CF card storage capacity will be required)

MEDIUM QUALITY MQ

Using medium recording quality.

LOW QUALITY LQ

Using low recording quality (Less CF card storage capacity will be required)

e Audio Record: Enable or disable audio recording.

2. SCHEDULE RECORD (Continuous/ Motion Detection ): Schedule Record: Records

only within the setup time range.

SCHEDULE RECORD

■■

:ON 18:00-08:30

704X240 12FPS

:ON 15:00-17:30

704X480 3FPS

MOT I ON RE CORD > CONT I NUE RECORD >

MOT I ON RE CO RD

■■■

RECORD :O

SCHEDULE :

18: 00 - 08 : 30

DURAT I ON : 5 SEC

VIDEO SIZE:704X240 FRAME RATE: 12FPS QUAL I T Y : M I D I UM AUD IO :ON

CONT I NUE RECORD

■■■

RECORD :ON

SCHEDULE :

15: 00 - 17: 30

VIDEO SIZE:704X240

FRAME RATE: 12FPS QUAL I T Y : M I D I UM AUD IO :ON

RECORD

：

Enable or disable schedule recording (ON/ OFF).

SCHEDULE

：

ab:cd – ab:cd = 24 hour recording and 00:00 – 00:01 = Record of one minute image from 00:00 to 00:01.

Motion Detection Recording DURATION TIME Setup:

DURATION

：

Duration time when motion detection has been triggered (5SEC / 10SEC / 15SEC/ 20SEC / 30SEC).

7.5 SD Card Options

SD CARD OPT IONS

■■

TOTAL SPACE: 128MB REMAI N SPACE : 50MB

SD FULL : LOOP

FORMAT >

NOTE: Proceeding continuous recording, old videos can be deleted and overwritten. Please confirm before

setup.

NOTE: Recording time depend on the SD card capacity, different recording modes, and degree of video

variation.

7.6 System Status

SYSTEM STATUS

■■

SYSTEM VER : V1 . 00

:704X240 12FPS :ON 18:00-08:30

704X240 12FPS

:ON 15:00 - 17P30

704X480 3FPS

SD FULL : LOOP

Press any button to return to the Main Menu.

　 SD Card Full

：

LOOP C (continuous recording)/ STOP (stop recording). Preset Record = Stop Record:

When SD card storage capacity is full, it will stop recording. Preset Record = Continuous Record:

When SD card storage capacity is full, it will start overwriting information from the earliest videos (auto repeating continuous recording).

　 SD Card Format

：

It will delete all data stored in the SD Card, and create a new directory DVMPG4 under root directory.

7.7 Factory Default

FACTORY DEFAULT

■■

RECALL DEFAULT NOW?

NO:EXIT YES:ENTER

Press《«Enter》button, returns all settings to the factory default value. Press《Stop/ Exit》button, exit this screen display and returns to the Main Menu.

NOTE: Return to factory default will erase all configuration values and return to the Factory Default values

（except Date and Time setup）. Therefore, confirm before you proceed.

8. TROUBLE SHOOTING

Q1. Does the product support SDHC 32G? A1. Suggested tested brands are as shown below:

Brand Capacity Specification

A-DATA 32G Class 6

Transcend 32G Class6

Silicon-Power 32G Class6

Apacer 32G Class4

Kingston 32G Class4

9. SPECIFICATION

System NTSC / PAL Video System and Video Loss Auto Detection Codec MPEG4-SP ASF File Format

Record Frame Rate

1, 2, … , Maximum fps selectable Maximum: NTSC: 30 fps@352x240/ 24 fps@704x240/ 12 fps@704x480 PAL: 25 fps@352x280/ 20 fps@704x280/ 10 fps@704x560

Record Quality Low / Medium / High

Frame Rate@

Resolution

Quality

30 fps@352x 240 25 fps@352x 280

24 fps@704x 240 20 fps@704x 280

12 fps@704x 480 10 fps@704x 560

Low 400 minutes 240 minutes 240 minutes

Medium 300 minutes 150 minutes 150 minutes

Record Time* *it may change for different video content (1 GB SD Card)

High 150 minutes 75 minutes 75 minutes

Recording Date/Time Overlay with Video Images in ASF File Input 1 CH Composite Video Line In

Video

Output 1 CH Composite Video Line Out Sampling Rate 44.1 KHz Codec G.726/ 32 kbps Input 1 CH Audio Line In

Audio

Output 1 CH Audio Line Out Storage Media SD Card (FAT16/ 32) Recording Mode Manual / Schedule Motion Detection / Schedule Continue Motion Detection Setting Multiple Blocks and adjustable sensitivity Event Search Function Property and first image of selected file is displayed Playback Function Play/Fast Forward/Fast Rewind/Pause/Step Forward/Step Backward Playback Speed x1/ x2/ x4/ x8/ x16/ x32 Power Supply DC 12V± 10% 410mA/ 2 x AA (Rechargeable Ni-MH/ Alkaline Battery)

Battery Lasting Time

2 x AA Ni-MH: 180 min/ 2 x AA Alkaline: 100 min * It may change for different brand, charging, and temperature

condition.

Weight 89 g (without Battery/ SD card) Dimensions 65 mm (W) x 90 mm (H) x 29 mm (D) Operating Environment

30%~80% RH, 5℃ ~ 45℃ (41℉ ~ 113℉)

Storage Environment

30%~90% RH, 0℃ ~ 50℃ (32℉ ~ 122℉)

(Note: Design and Specifications are subject to change without notice.)

8. Q&A 疑難排除說明

Meicheng RYK-9122 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual