MEGUIAR'S MV80 User Manual

Emergency telephone number (United States): CALL::

7

[phone]

SAFETY DATA SHEET

Conforms to 91/155/EEC - 2001/58/EC

1.

Identification of the substance/preparation and of the
company/undertaking

Identification of the substance or preparation

Product name
Reference Number :
Date of printing
Date of issue

Use of the substance/preparation : Polishing agent/Burnishing compound.
Company/undertaking identification

Information Contact Product safety department.:
Emergency telephone number : Europe (Meguiar's) [phone] (Office hours).

Meguiar's Holland

Laan der Verenigde Naties 40

3314 DA Dordrecht

Holland

Tel: [phone]

Fax: [phone]

www.meguiarseurope.com

Meguiar's UK Ltd.

3 Lamport Court

Daventry NN11 8UF

Tel: [phone]

Fax: [phone]

www.meguiarseurope.com

MV80 - Velocity Speed Cut Mold Compound
19-67B

::March 31, 2004.

March 31, 2004.

USA [phone] (24h collect).

Meguiar's France

79 avenue Édouard Vaillant

Heartlands

92100 BOULOGNE

France

Tel: [phone]

Fax: [phone]

www.meguiarseurope.com

Meguiar's Hong Kong

20/F Marina House
68 Hing Man Street

Shaukeiwan, Hong Kong

Tel: [phone]

Fax: [phone]

Suite 6-7,

Meguiar's USA

17991 Mitchell South

Irvine, CA 92614

Tel: [phone]

Fax: [phone]

2.

Composition/information on ingredients

Substance/Preparation Preparation

Europe / Italy

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45
Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65
Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

France

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45
Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65
Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

Netherlands

:

CAS# % EC# ClassificationIngredient Name

Xi; R36
R66

Xi; R36
R66

Date of issue

:

March 31, 2004.

Page: 1/

MV80 - Velocity Speed Cut Mold Compound

0

7

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45

Xi; R36

Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65

R66

Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

Germany

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45

Xi; R36

Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65

R66

Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

United Kingdom (UK)

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45

Xi; R36

Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65

R66

Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

Switzerland

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45

Xi; R36

Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65

R66

Diethylene Glycol Ether 111-90-0 1-3 203-919-7 Xi; R36

See Section 16 for the full text of the R Phrases declared
above

Spain

Crystalline Silica 1317-95-9 40-60 Carc. Cat. 1; R45

Xi; R36

Isoparaffinic hydrocarbon 64742-47-8 7-10 265-149-8 Xn; R65

R66

Diethylene Glycol Ethe 111-90-

See Section 16 for the full text of the R Phrases declared
above

1-3 203-919-7Xi; R36

* Occupational Exposure Limit(s), if available, are listed in Section 8

3.

Hazards identification

The preparation is classified as dangerous according to Directive 1999/45/EC and its amendments.

Classification Carc. Cat. 1; R45

See Section 11 for more detailed information on health effects and symptoms.

Date of issue

:

Xi; R36

:Human health hazards Irritating to eyes.

May cause cancer.

:

March 31, 2004.

Page: 2/

MV80 - Velocity Speed Cut Mold Compound

7

4.

First aid measures

See Section 11 for more detailed information on health effects and symptoms.

5.

NFPA

Special exposure hazards

Hazardous thermal
decomposition products

Special protective equipment for
fire-fighters

First aid measures

Inhalation

Ingestion

Skin Contact

Eye contact

:

:

:

:

Fire-fighting measures

Health

2

:

:

:

If inhaled, remove to f resh air. If breathing is difficult, give oxygen. If not breathing, give
artificial respiration. Obtain medical attention.

Do no t i nd uc e vom iting unle ss di r e c t ed to d o so by m e d i c a l p e r so nne l . N e ve r g i ve a nything by
mouth to an unconscious person. If large quantities of this material are swallowed, call a
physician immediately.

In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. W ash clothing before reuse. Clean shoes thoroughly before reuse. Obtain
medical attention.

In case of contact, immediately flush eyes with a copious amount of water for at least 15
minutes. Obtain medical attention immediately.

Flammability Reactivity

In case of fire, use water spray (fog), foam, dry chemical, or CO2.Extinguishing media :
No specific hazard.
Not available.
These products are carbon oxides (CO, CO2). Some metallic oxides.

Fire-fighters should wear self-contained positive pressure breathing apparatus (SCBA) and full
turnout gear.

00

6.

Accidental release measures

Personal Precautions

Environmental precautions and
cleanup methods

Note: See section 8 for personal protective equipment and section 13 for waste disposal.

7.

Handling and storage

Handling
Storage
Packaging materials

Recommended

8.

Exposure controls/personal protection

Ingredient Name
Europe / Italy

Crystalline Silica
Isoparaffinic hydrocarbon

: Imm e dia te ly c ont a ct em er ge ncy pe rso nnel . Ke ep unnec e ssar y pe rso nnel a w ay. Use suit ab le

protective equipment (Section 8). Follow all fire fighting procedures (Section 5).

:

Minimize contact of spilled material with soils to prevent runoff to surface waterways. See
Section 13 for Waste Disposal Information.

If em er ge ncy pe rsonnel a re unava ilab le, c ont ain spilled m ate ria l. For sma ll spills a dd
absorbent (soil may be used in the absence of other suitable materials) scoop up material and
place in a sealed , liquid- proof container fo r disposal. For lar ge spills d ike spille d mat erial o r
otherw ise c o nt ain mater ia l t o e nsure runoff doe s not r ea c h a w a t er w a y. Place sp ille d mate ria l
in an appropriate container for disposal.

Avoid contact with eyes. Wash thoroughly after handling.

:

Keep container tightly closed. Keep container in a cool, well-ventilated area.

:

Use original container.

:

Occupational Exposure Limits

ACGIH TLV (United States, 2003). :

TWA: 0.1 mg/m3 8 hour(s).

ACGIH TLV (United States).

TWA: 5 mg/m3 8 hour(s). Form: Mist
TWA: 200 mg/m3 8 hour(s).

Date of issue

:

March 31, 2004.

Page: 3/

MV80 - Velocity Speed Cut Mold Compound

f

7

Netherlands

Diethylene Glycol Ether

Spain

Crystalline Silica

Exposure controls

Occupational exposure
controls

Respiratory protection
Hand protection
Eye protection

Skin protection Additional body garments should be used based upon the task being performed (e.g.,

9.

Physical and chemical properties

General information

Appearance

Physical state

Important health, safety and environmental information

pH
Boiling point
Flash point

Explosive properties

Vapour pressure

Relative density

Solubility

Vapour density

Evaporation Rate <1 compared to Butyl acetate.
VOC Content : 7% (v/v).

Provide exhaust ventilation or other engin eering controls to keep the airborne concentrations o

:

vapours below their respective occupational exposure limits. Ensure that eyewash stations
and safety showers are close to the workstation location.

A respirator is not needed under normal and intended conditions of product use.

:

Use latex gloves.

:

Safety glasses. Goggles, face shield, or other full-face protection if potential exists for direct

:

exposure to aerosols or splashes.

:

sleevelets, apron, gauntlets, disposable suits).

Liquid.

:

Brownish-red.Colour

:

Hydrocarbon.Odour

:

:

5.5 [Acidic.]
202°C (395.6°F)

:

Closed cup: Higher than 93.3°C (200°F). (Pensky-Martens.)

:

Risks of explosion of the product in presence of mechanical impact: Not available.

:

Risks of explosion of the product in presence of static discharge: Not available.
Not applicableOxidising properties :
The highest known value is <0.01 kPa (<0.1 mm Hg) (at 20°C) (Isoparaffinic hydrocarbon).

:

1.02 g/cm

:

Easily soluble in methanol, acetone.

:

Partially soluble in cold water, hot water.
>1 (Air = 1)

:
:

Nationale MAC-lijst (Netherlands, 2001). Skin Notes: Legal

TGG: 180 mg/m3 8 hour(s).
TGG: 32 ppm 8 hour(s).

INSHT (Spain, 2003). Notes:

TWA: 0.1 mg/m3 8 hour(s).

3

Other information

Auto-ignition temperature

10.

Stability and reactivity

Stability

Materials to avoid
Hazardous Decomposition

Products

Date of issue

The lowest known value is 204.49°C (400.1°F) (Diethylene Glycol Ether).

:

The product is stable.

:

Reactive with oxidizing agents.

:
:

These products are carbon oxides (CO, CO2). Some metallic oxides.

:

March 31, 2004.

Page: 4/

MV80 - Velocity Speed Cut Mold Compound

A

7

11.

Toxicological information

Potential Acute Health Effects

Inhalation : No specific hazard.

No specific hazard.:Ingestion

Skin Contact : No specific hazard.

Irritating to eyes.:Eye contact

Acute toxicity

Ingredient Name

Diethylene Glycol Ether LD50 3620 mg/kg Oral Rabbit

Potential Chronic Health Effects

Ingredient Name

Crystalline Silica Carc. Cat. 1; R45

Test Result Route Species

Carcinogenic effects Mutagenic Effects Developmental toxicity Impairs fertility

Carcinogenicity

Over-exposure signs/symptoms

12.

Ecological information

Ecotoxicity Data

Ingredient Name

Isoparaffinic hydrocarbon Oncorhynchus mykiss (LC50) 96 hour(s) 2.9 mg/l
Diethylene Glycol Ether Pimephales promelas (LC50)

Other adverse effects : Not available.

13.

Disposal considerations

(EWC)

Contains material which can cause cancer. Risk of cancer depends on duration and level of

:

exposure.

Species Period Result

96 hour(s)
Lepomis macrochirus (LC50)
Oncorhynchus mykiss (LC50)
Pimephales promelas (LC50)
Lepomis macrochirus (LC50)
Pimephales promelas (LC50)

void contact of spilled material and runoff with soil and surface waterways. Dispose of

:Methods of disposal

according to all federal, state and local applicable regulations.
Not applicable.:Waste Classification
Not applicable.European Waste Catalogue

:

Not applicableHazardous Waste :

96 hour(s)

96 hour(s)

96 hour(s)

96 hour(s)

96 hour(s)

9650 mg/l
>10000 mg/l
13400 mg/l
13900 mg/l
21400 mg/l
26500 mg/l

14.

Transport information

International transport regulations

Regulatory
information

ADR/RID Class

ADN Class

IMDG Class ---

Date of issue

UN number Proper shipping name Class Packing

group

Not regulated.

Not regulated.

--I

---Not regulated.

-Not regulated.IATA-DGR Class -

:

March 31, 2004.

-

Label Additional

Information

-

-

-

-

Page: 5/

MV80 - Velocity Speed Cut Mold Compound

.

7

15.

Regulatory information

EU Regulations

Hazard symbol(s)

Risk Phrases

Safety Phrases S53- Avoid exposure - obtain special instructions before use.

Contains
Product Use Classifica tion a nd lab elling have been perform ed according to EU directives 67/548/EEC,

Restrictions on the
Marketing and Use Directive

(Tariff Code)
France
Netherlands
Germany

Employment restrictions in
accordance with § 15b of the
Hazardous Substance
Ordinance

Ordinance
Ordinance on Combustible

Liquids

Switzerland

LRV Klasse (Ta-Luft) Not available.:
Poison Class Not regulated:
BAGT 619000:
VOC Content Liberated.:

Italy

Restrictions on the use of
Benzol and Similar materials

:

Toxic
R45- May cause cancer.

:

R36- Irritating to eyes.

:

S2- Keep out of the reach of children.
S36/37- Wear suitable protective clothing and gloves.
S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label
where possible)

:

Crystalline Silica

:

1999/45/EC, including amendments and the intended use.

- Industrial applications.
P99- Restricted to professional users. Attention - Avoid exposure - obtain special instructions

:

before use.
Not allowed on General Public market.

32089091EC Statistical Classification

:

Yes.

:

Yes.Hazardous Incident

:

Class: Omitted

:

3Hazard class for water

:

Not applicable.:

93.5% Not classified.Emissions Control Directive :

16.

Other information

Full text of R phrases referred to
in Sections 2 and 3 - Europe

referred to in Sections 2 and 3 ­Europe

Date of issue

R45- May cause cancer.

:

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

Carc. Cat.1 - Carcinogen Category 1

:Full text of classifications

Xn - Harmful
Xi - Irritant

:

March 31, 2004.

Page: 6/

MV80 - Velocity Speed Cut Mold Compound

7

F

d

s

t

R45- May cause cancer.

:Full text of R phrases referred to

in Sections 2 and 3 - France

Full text of classifications
referred to in Sections 2 and 3 ­France

in Sections 2 and 3 ­Netherlands

Full text of classifications
referred to in Sections 2 and 3 ­Netherlands

in Sections 2 and 3 - Germany

Full text of classifications
referred to in Sections 2 and 3 ­Germany

in Sections 2 and 3 - United
Kingdom (UK)

referred to in Sections 2 and 3 ­United Kingdom (UK)

in Sections 2 and 3 ­Switzerland

Full text of classifications
referred to in Sections 2 and 3 ­Switzerland
Full text of R phrases referred to
in Sections 2 and 3 - Spain

referred to in Sections 2 and 3 ­Spain

Notice to Reader

To the best o f o ur k n o wled g e, the in f o rmation co n ta ined h er ein is a ccur a te. However, neither the above named supplier nor any of its
subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

inal determination o f suita b ility o f a ny material is th e sole r esp o n s ib ility o f the u ser . All ma ter ia ls may presen t u nknown hazards an

hould be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards tha

exist.

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

: Carc. Cat.1 - Carcinogen Category 1

Xn - Harmful
Xi - Irritant

R45- May cause cancer.

:Full text of R phrases referred to

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

: Carc. Cat.1 - Carcinogen Category 1

Xn - Harmful
Xi - Irritant

R45- May cause cancer.

:Full text of R phrases referred to

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

: Carc. Cat.1 - Carcinogen Category 1

Xn - Harmful
Xi - Irritant
R45- May cause cancer.

:Full text of R phrases referred to

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

Carc. Cat.1 - Carcinogen Category 1

:Full text of classifications

Xn - Harmful
Xi - Irritant
R45- May cause cancer.

:Full text of R phrases referred to

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

: Carc. Cat.1 - Carcinogen Category 1

Xn - Harmful
Xi - Irritant

: R45- May cause cancer.

R65- Harmful: may cause lung damage if swallowed.
R36- Irritating to eyes.
R66- Repeated exposure may cause skin dryness or cracking.

Carc. Cat.1 - Carcinogen Category 1

:Full text of classifications

Xn - Harmful
Xi - Irritant

Version

1

Page: 7/