Page 1
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 1 of 15
Safety Data Sheet
Copyright, 2012, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.
Document group:
28-3122-0
Version number:
1.02
Revision date:
07/07/2012
Supersedes date:
21/11/2011
Transportation version number: 1.00 (18/08/2010)
This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.
SECTION 1: Identification of the substance/mixture and of the
company/undertaking
1.1. Product identifier
M95, Speed Cut Compound (20-177C): M9501, M9532
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Automotive.
1.3. Details of the supplier of the substance or mixture
Address:
Meguiars United Kingdon Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF
Telephone:
+44 (0)870 241 6696
E Mail:
info@meguiars.co.uk
Website:
www.meguiars.co.uk
1.4. Emergency telephone number
+44 (0)870 241 6696
SECTION 2: Hazard identification
2.1. Classification of the substance or mixture
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
This product is not classified as hazardous according to EU Directive 1999/45/EC.
2.2. Label elements
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Symbols None.
Contains:
Page 2
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 2 of 15
No ingredients are assigned to the label.
Risk phrases None.
Safety phrases None.
Special provisions concerning the labelling of certain substances
Safety data sheet available for professional user on request.
Notes on labelling
R65 is not required on the label due to the product's viscosity.
Nota N applied to CASRN 64742-46-7.
2.3. Other hazards
None known.
SECTION 3: Composition/information on ingredients
Ingredient CAS Nbr EU Inventory % by Wt Classification
Non-hazardous ingredient Mixture 50 - 80
Solvent naphtha (petroleum), medium
aliphatic
64742-88-7 EINECS 265-
191-7
7 - 13 Xn:R65 - Nota 4 (EU)
R10; R66; R67 (Self Classified)
Asp. Tox. 1, H304 (CLP)
Flam. Liq. 3, H226; STOT SE 3,
H336; EUH066 (Self Classified)
Aluminium oxide (REACH Reg. No.:012119529248-35)
1344-28-1 EINECS 215-
691-6
7 - 13
Distillates (petroleum), hydrotreated middle 64742-46-7 EINECS 265-
148-2
1 - 5 Nota N (EU)
Xn:R20-65; R66 (Self
Classified)
Nota N (CLP)
Acute Tox. 4, H332; Asp. Tox.
1, H304; STOT SE 3, H336;
EUH066 (Self Classified)
Glycerin 56-81-5 EINECS 200-
289-5
1 - 5
Conditioners Trade Secret < 5
Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-
149-8
1 - 5 Xn:R65 - Nota 4 (EU)
R10; R66; R67 (Self Classified)
Asp. Tox. 1, H304 (CLP)
Flam. Liq. 3, H226; STOT SE 3,
H336; EUH066 (Self Classified)
Triethanolamine 102-71-6 EINECS 203-
049-8
0.5 - 1.5
Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components
For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS
SECTION 4: First aid measures
Page 3
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 3 of 15
4.1. Description of first aid measures
Eye contact
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.
Skin contact
Wash with soap and water. If signs/symptoms develop, get medical attention.
Inhalation
Remove person to fresh air. If you feel unwell, get medical attention.
If swallowed
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1 Information on toxicological effects
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance Condition
Hydrocarbons. During combustion.
Carbon monoxide. During combustion.
Carbon dioxide. During combustion.
Irritant vapours or gases. During combustion.
Oxides of nitrogen. During combustion.
5.3. Advice for fire-fighters
No unusual fire or explosion hazards are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapours, in accordance with good industrial hygiene practice. Warning: A motor could be an ignition source and
could cause flammable gases or vapours in the spill area to burn or explode. Refer to other sections of this SDS for
information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
Page 4
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 4 of 15
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible.
Clean up residue with detergent and water. Place in a closed container approved for transportation by appropriate authorities.
Seal the container. Dispose of collected material as soon as possible.
6.4. Reference to other sections
Refer to Section 8 and Section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid breathing of dust created by
cutting, sanding, grinding or machining. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.)
7.2. Conditions for safe storage including any incompatibilities
Store away from acids. Store away from oxidising agents. Store away from strong bases.
7.3. Specific end use(s)
See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Occupational exposure limits
Ingredient CAS Nbr Agency Limit type Additional comments
Aluminium oxide 1344-28-1 Health and
Safety Comm.
(UK)
TWA(as inhalable dust):10
mg/m³;TWA(as respirable
dust):4 mg/m³
Glycerin 56-81-5 Health and
Safety Comm.
(UK)
TWA(as mist):10 mg/m3
Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
ppm: parts per million
mg/m³: milligrams per cubic metre
CEIL: Ceiling
8.2. Exposure controls
8.2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
The following eye protection(s) are recommended: Safety glasses with side shields.
Skin/hand protection
Page 5
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 5 of 15
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
Liquid.
Appearance/Odour
Sweet hydrocarbon odoUr; White, creamy, viscous lotion
pH
8 - 8.8
Boiling point/boiling range
193.3 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not classified
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
93.3 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.
Vapour pressure
No data available.
Relative density
1.02 [Ref Std:WATER=1]
Water solubility
Moderate
Partition coefficient: n-octanol/water
No data available.
Evaporation rate
No data available.
Vapour density
No data available.
Viscosity
25 - 40 Pa-s
Density
1.02 g/cm3
9.2. Other information
Volatile organic compounds (VOC)
11.26 % weight
VOC less H2O & exempt solvents
501.48 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.
Page 6
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 6 of 15
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Heat.
10.5 Incompatible materials
Strong acids.
Strong bases.
Strong oxidising agents.
10.6 Hazardous decomposition products
Substance Condition
None known.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labelling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1 Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Eye contact
Dust created by cutting, grinding, sanding, or machining may cause eye irritation: Signs/symptoms may include redness,
swelling, pain, tearing, and blurred or hazy vision.
Skin contact
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Inhalation
Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain. Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system:
Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, nose and throat pain. May cause target
organ effects after inhalation.
Ingestion
Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea.
Target Organ Effects:
Prolonged or repeated exposure may cause:
Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of
sputum, and changes in lung function tests.
Toxicological Data
Acute Toxicity
Name Route Species Value
Page 7
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 7 of 15
Overall product Ingestion No test data available; calculated ATE
>5,000 mg/kg
Aluminium oxide Inhalation-Dust/Mist
(4 hours)
Rabbit LC50 > 1.9 mg/l
Aluminium oxide Ingestion Rat LD50 > 5,000 mg/kg
Solvent naphtha (petroleum),
medium aliphatic
Dermal Rabbit LD50 > 3,000 mg/kg
Solvent naphtha (petroleum),
medium aliphatic
Inhalation-Vapor (4
hours)
Rat LC50 estimated to be 20 - 50 mg/l
Solvent naphtha (petroleum),
medium aliphatic
Ingestion Rat LD50 > 5,000 mg/kg
Distillates (petroleum), hydrotreated
light
Dermal Rabbit LD50 > 3,160 mg/kg
Distillates (petroleum), hydrotreated
light
Inhalation-Dust/Mist
(4 hours)
Rat LC50 > 3.0 mg/l
Distillates (petroleum), hydrotreated
light
Ingestion Rat LD50 > 5,000 mg/kg
Distillates (petroleum), hydrotreated
middle
Dermal Rabbit LD50 > 2,000 mg/kg
Distillates (petroleum), hydrotreated
middle
Inhalation-Dust/Mist
(4 hours)
Rat LC50 5 mg/l
Distillates (petroleum), hydrotreated
middle
Ingestion Rat LD50 > 5,000 mg/kg
Glycerin Dermal Rabbit LD50 estimated to be > 5,000 mg/kg
Glycerin Ingestion Rat LD50 > 5,000 mg/kg
Triethanolamine Dermal Rabbit LD50 > 2,000 mg/kg
Triethanolamine Ingestion Rat LD50 9,000 mg/kg
Conditioners Ingestion LD50 estimated to be > 5,000 mg/kg
ATE = acute toxicity estimate
Skin Corrosion/Irritation
Name Species Value
Aluminium oxide No data available
Solvent naphtha (petroleum), medium aliphatic Mild irritant
Distillates (petroleum), hydrotreated light Mild irritant
Distillates (petroleum), hydrotreated middle Rabbit Minimal irritation
Glycerin Rabbit No significant irritation
Triethanolamine Rabbit Minimal irritation
Conditioners Minimal irritation
Serious Eye Damage/Irritation
Name Species Value
Aluminium oxide No data available
Solvent naphtha (petroleum), medium aliphatic Mild irritant
Distillates (petroleum), hydrotreated light Mild irritant
Distillates (petroleum), hydrotreated middle Not available Mild irritant
Glycerin Rabbit No significant irritation
Triethanolamine Rabbit Mild irritant
Conditioners Mild irritant
Skin Sensitisation
Name Species Value
Aluminium oxide No data available
Solvent naphtha (petroleum), medium aliphatic Not sensitizing
Distillates (petroleum), hydrotreated light Not sensitizing
Distillates (petroleum), hydrotreated middle No data available
Glycerin Guinea pig Not sensitizing
Triethanolamine Human Some positive data exist, but the data are not
sufficient for classification
Page 8
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 8 of 15
Conditioners Some positive data exist, but the data are not
sufficient for classification
Respiratory Sensitisation
Name Species Value
Aluminium oxide No data available
Solvent naphtha (petroleum), medium aliphatic No data available
Distillates (petroleum), hydrotreated light No data available
Distillates (petroleum), hydrotreated middle No data available
Glycerin No data available
Triethanolamine No data available
Conditioners No data available
Germ Cell Mutagenicity
Name Route Value
Aluminium oxide In Vitro Not mutagenic
Solvent naphtha (petroleum), medium aliphatic Inhalation Not mutagenic
Solvent naphtha (petroleum), medium aliphatic In Vitro Some positive data exist, but the data are not
sufficient for classification
Distillates (petroleum), hydrotreated light In Vitro Not mutagenic
Distillates (petroleum), hydrotreated middle In Vitro Some positive data exist, but the data are not
sufficient for classification
Glycerin No data available
Triethanolamine In Vitro Not mutagenic
Triethanolamine In vivo Not mutagenic
Conditioners In Vitro Not mutagenic
Conditioners In vivo Not mutagenic
Carcinogenicity
Name Route Species Value
Aluminium oxide Inhalation Not carcinogenic
Solvent naphtha (petroleum),
medium aliphatic
Dermal Some positive data exist, but the data
are not sufficient for classification
Solvent naphtha (petroleum),
medium aliphatic
Inhalation Some positive data exist, but the data
are not sufficient for classification
Distillates (petroleum), hydrotreated
light
Dermal Some positive data exist, but the data
are not sufficient for classification
Distillates (petroleum), hydrotreated
middle
Dermal Mouse Some positive data exist, but the data
are not sufficient for classification
Glycerin Ingestion Mouse Some positive data exist, but the data
are not sufficient for classification
Triethanolamine Dermal Multiple animal
species
Not carcinogenic
Triethanolamine Ingestion Mouse Some positive data exist, but the data
are not sufficient for classification
Conditioners No data available
Reproductive Toxicity
Reproductive and/or Developmental Effects
Name Route Value Species Test result Exposure Duration
Aluminium oxide No data available
Solvent naphtha
(petroleum), medium
aliphatic
Inhalation Not toxic to
reproduction and/or
development
NOAEL
2.356 mg/l
Distillates
(petroleum),
hydrotreated light
Inhalation Not toxic to
reproduction and/or
development
NOAEL 364
ppm
Distillates No data available
Page 9
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 9 of 15
(petroleum),
hydrotreated middle
Glycerin Ingestion Not toxic to female
reproduction
Rat NOAEL
2,000
mg/kg/day
2 generation
Glycerin Ingestion Not toxic to male
reproduction
Rat NOAEL
2,000
mg/kg/day
2 generation
Glycerin Ingestion Not toxic to
development
Rat NOAEL
2,000
mg/kg/day
2 generation
Triethanolamine Ingestion Not toxic to
development
Mouse NOAEL
1,125
mg/kg/day
during organogenesis
Conditioners Ingestion Some positive
reproductive/develop
mental data exist, but
the data are not
sufficient for
classification
NOEL 248
mg/kg/day
Target Organ(s)
Specific Target Organ Toxicity - single exposure
Name Route Target
Organ(s)
Value Species Test result Exposure
Duration
Aluminium
oxide
Inhalation respiratory
irritation
Some positive
data exist, but the
data are not
sufficient for
classification
Irritation
Positive
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation central nervous
system
depression
May cause
drowsiness or
dizziness
NOAEL N/A
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation respiratory
irritation
Some positive
data exist, but the
data are not
sufficient for
classification
Irritation
Positive
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation nervous system Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 6.5 mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation respiratory
system
Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 2.4 mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation heart All data are
negative
NOAEL 2.5
mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation liver | kidney
and/or bladder
All data are
negative
NOAEL 0.610
mg/l
Page 10
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 10 of 15
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation muscles All data are
negative
NOAEL 0.61
mg/l
Distillates
(petroleum),
hydrotreated
light
Inhalation central nervous
system
depression
May cause
drowsiness or
dizziness
NOAEL N/A
Distillates
(petroleum),
hydrotreated
light
Inhalation respiratory
irritation
Some positive
data exist, but the
data are not
sufficient for
classification
Irritation
Positive
Distillates
(petroleum),
hydrotreated
middle
Inhalation central nervous
system
depression |
respiratory
irritation
Some positive
data exist, but the
data are not
sufficient for
classification
Not available NOAEL NA
Distillates
(petroleum),
hydrotreated
middle
Ingestion central nervous
system
depression
May cause
drowsiness or
dizziness
Not available NOAEL NA
Glycerin No data available
Triethanolami
ne
No data available
Conditioners No data available
Specific Target Organ Toxicity - repeated exposure
Name Route Target
Organ(s)
Value Species Test result Exposure
Duration
Aluminium
oxide
Inhalation pneumoconiosis May cause
damage to organs
though prolonged
or repeated
exposure
NOAEL N/A
Aluminium
oxide
Inhalation pulmonary
fibrosis
Some positive
data exist, but the
data are not
sufficient for
classification
NOAEL N/A
Solvent
naphtha
(petroleum),
medium
aliphatic
Dermal nervous system Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 691
mg/kg
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation nervous system Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 4.580
mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation respiratory
system
Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 0.619
mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation endocrine
system | muscles
Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 0.616
mg/l
Page 11
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 11 of 15
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation kidney and/or
bladder
Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 0.57 mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation bone, teeth,
nails, and/or
hair | blood |
liver
All data are
negative
NOAEL 5.62
mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation heart All data are
negative
NOAEL 1.271
mg/l
Solvent
naphtha
(petroleum),
medium
aliphatic
Inhalation immune system All data are
negative
NOAEL 0.616
mg/l
Distillates
(petroleum),
hydrotreated
light
Dermal bone, teeth,
nails, and/or
hair
Some positive
data exist, but the
data are not
sufficient for
classification
NOEL N/A
Distillates
(petroleum),
hydrotreated
light
Dermal liver Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 1,000
mg/kg/day
Distillates
(petroleum),
hydrotreated
light
Inhalation hematopoietic
system
All data are
negative
NOAEL 0.1
mg/l
Distillates
(petroleum),
hydrotreated
light
Ingestion liver Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 100
mg/kg/day
Distillates
(petroleum),
hydrotreated
light
Ingestion kidney and/or
bladder
Some positive
data exist, but the
data are not
sufficient for
classification
LOAEL 100
mg/kg
Distillates
(petroleum),
hydrotreated
middle
No data available
Glycerin Inhalation respiratory
system
Some positive
data exist, but the
data are not
sufficient for
classification
Rat NOAEL 3.91
mg/l
14 days
Glycerin Inhalation heart | liver |
kidney and/or
bladder
All data are
negative
Rat NOAEL 3.91
mg/l
14 days
Glycerin Ingestion endocrine
system |
hematopoietic
system | liver |
kidney and/or
All data are
negative
Rat NOAEL 10,000
mg/kg/day
2 years
Page 12
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 12 of 15
bladder
TriethanolamineDermal kidney and/or
bladder
Some positive
data exist, but the
data are not
sufficient for
classification
Multiple
animal species
NOAEL 2,000
mg/kg/day
2 years
TriethanolamineDermal liver Some positive
data exist, but the
data are not
sufficient for
classification
Mouse NOAEL 4,000
mg/kg/day
13 weeks
TriethanolamineIngestion kidney and/or
bladder
Some positive
data exist, but the
data are not
sufficient for
classification
Rat LOAEL 1,000
mg/kg/day
2 years
TriethanolamineIngestion liver Some positive
data exist, but the
data are not
sufficient for
classification
Guinea pig NOAEL 1,600
mg/kg/day
24 weeks
Conditioners Ingestion kidney and/or
bladder
Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 3,000
mg/kg/day
Conditioners Ingestion hematopoietic
system
Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 300
mg/kg/day
Conditioners Ingestion heart Some positive
data exist, but the
data are not
sufficient for
classification
LOEL 248
mg/kg/day
Conditioners Ingestion liver Some positive
data exist, but the
data are not
sufficient for
classification
NOEL 2,000
mg/kg/day
Aspiration Hazard
Name Value
Aluminium oxide Not an aspiration hazard
Solvent naphtha (petroleum), medium aliphatic Aspiration hazard
Distillates (petroleum), hydrotreated light Aspiration hazard
Distillates (petroleum), hydrotreated middle Aspiration hazard
Glycerin Not an aspiration hazard
Triethanolamine Not an aspiration hazard
Conditioners Not an aspiration hazard
Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.
SECTION 12: Ecological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications
are mandated by a competent authority. Additional information leading to material classification in Section 2 is available
Page 13
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 13 of 15
upon request. In addition, environmental fate and effects data on ingredients may not be reflected in this section because an
ingredient is present below the threshold for labelling, an ingredient is not expected to be available for exposure, or the data
is considered not relevant to the material as a whole.
12.1. Toxicity
Acute aquatic hazard:
Not acutely toxic to aquatic life by GHS criteria.
Chronic aquatic hazard:
Not chronically toxic to aquatic life by GHS criteria.
No product test data available.
No component test data available.
12.2. Persistence and degradability
No test data available.
12.3 : Bioaccumulative potential
No test data available.
12.4. Mobility in soil
Please contact manufacturer for more details
12.5. Results of the PBT and vPvB assessment
No information available at this time, contact manufacturer for more details
12.6. Other adverse effects
No information available.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations
Dispose of waste product in a permitted industrial waste facility. Incinerate in a permitted waste incineration facility. Proper
destruction may require the use of additional fuel during incineration processes.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC 2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor
EU waste code (product as sold)
120199 Wastes not otherwise specified
200115* Alkalines
SECTION 14: Transportation information
ADR: Not restricted for transport.
IMDG: Not restricted for transport.
IATA: Not restricted for transport.
Page 14
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 14 of 15
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Carcinogenicity
Ingredient CAS Nbr Classification Regulation
Triethanolamine 102-71-6 Gr. 3: Not classifiable International Agency
for Research on Cancer
Global inventory status
Contact manufacturer for more information The components of this product are in compliance with the chemical notification
requirements of TSCA.
15.2. Chemical Safety Assessment
Not applicable
SECTION 16: Other information
List of relevant H statements
EUH066 Repeated exposure may cause skin dryness or cracking.
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H332 Harmful if inhaled.
H336 May cause drowsiness or dizziness.
List of relevant R-phrases
R10 Flammable.
R20 Harmful by inhalation.
R65 Harmful: May cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.
Revision information:
Revision Changes:
Section 8: Respiratory protection - recommended respirators information was modified.
Section 8: Respiratory protection - recommended respirators was modified.
Section 16: List of relevant R phrase information was modified.
Section 3: Composition/ Information of ingredients table was modified.
Copyright was modified.
Aspiration Hazard Table was modified.
Section 11: Acute Toxicity table was modified.
Carcinogenicity Table was modified.
Serious Eye Damage/Irritation Table was modified.
Germ Cell Mutagenicity Table was modified.
Skin Sensitisation Table was modified.
Respiratory Sensitisation Table was modified.
Reproductive Toxicity Table was modified.
Skin Corrosion/Irritation Table was modified.
Target Organs - Repeated Table was modified.
Target Organs - Single Table was modified.
Section 7: Precautions safe handling information was modified.
Two-column table displaying the unique list of H Codes and statements (std phrases) for all components of the given
material. was modified.
Section 8: Respiratory protection - recommended respirators guide was added.
Page 15
M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 15 of 15
Section 11: UN GHS Classification table heading was deleted.
DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our
knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use
(except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the
product in combination with other materials. For these reasons, it is important that customers carry out their own test to
satisfy themselves as to the suitability of the product for their own intended applications.
Meguiar's, Inc. United Kingdom MSDSs are available at www.meguiars.co.uk
Loading...