MEGUIAR'S M87 User Manual

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 1 of 13

Safety Data Sheet

Copyright, 2014, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.

Document group:

28-5382-8

Version number:

4.00

Revision date:

09/10/2014

Supersedes date:

06/05/2014

Transportation version number: 1.00 (02/09/2011)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the
company/undertaking

1.1. Product identifier

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Mold release agent

1.3. Details of the supplier of the substance or mixture
Address:

Meguiars United Kingdom Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF

Telephone:

[phone]

E Mail:

[e-mail]

Website:

www.meguiars.co.uk

1.4. Emergency telephone number

[phone]

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008

CLASSIFICATION:

Flammable Solid, Category 1 - Flam. Sol. 1; H228
Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315
Specific Target Organ Toxicity-Single Exposure, Category 3 - STOT SE 3; H336

For full text of H phrases, see Section 16.

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Indication of danger

Highly flammable; F; R11
Irritant; Xi; R38

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 2 of 13

R67

For full text of R phrases, see Section 16.

2.2. Label elements

CLP REGULATION (EC) No 1272/2008

SIGNAL WORD

DANGER!

Symbols:

GHS02 (Flame) |GHS07 (Exclamation mark) |

Pictograms

Ingredient CAS Nbr % by Wt
NUC - Naphthol Spirits 64742-48-9 40 - 60
Distillates (petroleum), hydrotreated light 64742-47-8 10 - 30

HAZARD STATEMENTS:

H228 Flammable solid.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

PRECAUTIONARY STATEMENTS
General:

P102 Keep out of reach of children.
P101 If medical advice is needed, have product container or label at hand.

Prevention:

P210A Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P260B Do not breathe dust.
P262 Do not get in eyes, on skin, or on clothing.
P271 Use only outdoors or in a well-ventilated area.

Response:

P332 + P313 If skin irritation occurs: Get medical advice/attention.
P331 Do NOT induce vomiting.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician.
P370 + P378G In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or

carbon dioxide to extinguish.

Disposal:

P501 Dispose of contents/container in accordance with applicable local/regional/national/international

regulations.

7% of the mixture consists of components of unknown acute oral toxicity.

Contains 87% of components with unknown hazards to the aquatic environment.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 3 of 13

Notes on labelling

H304 is not required on the label due to the product's viscosity
Nota P applied to CASRN 64742-48-9.
H228 assigned based on test data indicating that this product is a flammable solid.

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

Symbol(s)

Highly
Flammable

Irritant

Contains:

No ingredients are assigned to the label.

Risk phrases

R11 Highly flammable.
R38 Irritating to skin.
R67 Vapours may cause drowsiness and dizziness.

Safety phrases

S16 Keep away from sources of ignition - No Smoking.
S22 Do not breathe dust.
S24 Avoid contact with skin.
S62 If swallowed, do not induce vomiting: Seek medical advice immediately and show this container or

label.

S2 Keep out of the reach of children.

Notes on labelling

R65 is not required on the label due to the product's viscosity.

Nota P applied to CASRN 64742-48-9.
R11 assigned based on test data indicating that this product is a flammable solid.

2.3. Other hazards

None known.

SECTION 3: Composition/information on ingredients

Ingredient CAS Nbr EU Inventory % by Wt Classification

NUC - Naphthol Spirits 64742-48-9 EINECS 265-

150-3

40 - 60 Xn:R65 - Nota 4,P (EU)

Xi:R38; R67 (Self Classified)

Asp. Tox. 1, H304 - Nota P
(CLP)
Skin Irrit. 2, H315; STOT SE 3,
H336 (Self Classified)

Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-

149-8

10 - 30 Xn:R65 - Nota 4 (EU)

R10; R66; R67 (Self Classified)

Asp. Tox. 1, H304 (CLP)

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 4 of 13

Flam. Liq. 3, H226; STOT SE 3,

H336; EUH066 (Self Classified)
Conditioners Trade Secret < 10
Oxidised polyethylene 68441-17-8 5 - 10
Siloxanes and silicones, di-Me 63148-62-9 5 - 10
Carnauba Wax 8015-86-9 EINECS 232-

399-4

5 - 10

Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components

For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation

Remove person to fresh air. If you feel unwell, get medical attention.

Skin contact

Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop,
get medical attention.

Eye contact

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

If swallowed

Rinse mouth. If you feel unwell, get medical attention.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1 Information on toxicological effects

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Extinguishing media

In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

None inherent in this product.

Hazardous Decomposition or By-Products

Substance Condition

Formaldehyde During combustion.
Carbon monoxide. During combustion.
Carbon dioxide. During combustion.
Irritant vapours or gases. During combustion.

5.3. Advice for fire-fighters

No special protective actions for fire-fighters are anticipated.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 5 of 13

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate
the area with fresh air. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory
protection, ventilation, and personal protective equipment.

6.2. Environmental precautions

Avoid release to the environment.

6.3. Methods and material for containment and cleaning up

Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled
material as possible using non-sparking tools. Place in a metal container approved for transportation by appropriate
authorities. Clean up residue. Seal the container. Dispose of collected material as soon as possible.

6.4. Reference to other sections

Refer to Section 8 and Section 13 for more information

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Do not use in a confined area with minimal air exchange. Keep out of reach of children. Keep away from heat/sparks/open
flames/hot surfaces. - No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on
clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidising
agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. To minimize the risk of ignition,
determine applicable electrical classifications for the process using this product and select specific local exhaust ventilation
equipment to avoid flammable vapor accumulation. Ground/bond container and receiving equipment if there is potential for
static electricity accumulation during transfer.

7.2. Conditions for safe storage including any incompatibilities

Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store away from heat. Store away from acids.
Store away from strong bases. Store away from oxidising agents.

7.3. Specific end use(s)

See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational exposure limits

If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available
for the component.

Ingredient CAS Nbr Agency Limit type Additional comments

NUC - Naphthol Spirits 64742-48-9 Manufacturer

determined

TWA:100 ppm

UK HSC : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling

Biological limit values

No biological limit values exist for any of the components listed in Section 3 of this safety data sheet.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 6 of 13

8.2. Exposure controls

8.2.1. Engineering controls

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.
Use explosion-proof ventilation equipment.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face
protection(s) are recommended:
Safety glasses with side shields.

Skin/hand protection

Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Neoprene.
Nitrile rubber.

Respiratory protection

Wear respiratory protection if ventilation is inadequate to prevent overexposure. An exposure assessment may be needed to
decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program.
Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates

For questions about suitability for a specific application, consult with your respirator manufacturer.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state

Solid.

Specific Physical Form:

Paste

Appearance/Odour

Sweet fragrance; Yellow, cream-coloured paste

Odour threshold

No data available.

pH

Not applicable.

Boiling point/boiling range

365 ºC

Melting point

Not applicable.

Flammability (solid, gas)

Flammable Solid: Category 1.

Explosive properties

Not classified

Oxidising properties

Not classified

Flash point

65.6 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:M8711]

Autoignition temperature

No data available.

Flammable Limits(LEL)

No data available.

Flammable Limits(UEL)

No data available.

Vapour pressure

No data available.

Relative density

0.82 [Ref Std:WATER=1]

Water solubility

Nil

Solubility- non-water

No data available.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 7 of 13

Partition coefficient: n-octanol/water

No data available.

Evaporation rate

No data available.

Vapour density

No data available.

Decomposition temperature

No data available.

Viscosity

>=0.1 Pa-s

Density

0.82 g/cm3

9.2. Other information

Volatile organic compounds (VOC)

73.90 % weight

VOC less H2O & exempt solvents

605.98 g/l

SECTION 10: Stability and reactivity

10.1 Reactivity

This material is considered to be non reactive under normal use conditions

10.2 Chemical stability

Stable.

10.3 Possibility of hazardous reactions

Hazardous polymerisation will not occur.

10.4 Conditions to avoid

Heat.
Sparks and/or flames.

10.5 Incompatible materials

Strong acids.
Strong bases.
Strong oxidising agents.

10.6 Hazardous decomposition products

Substance Condition

None known.

Refer to section 5.2 for hazardous decomposition products during combustion.

SECTION 11: Toxicological information

The information below may not agree with the EU material classification in Section 2 and/or the ingredient
classifications in Section 3 if specific ingredient classifications are mandated by a competent authority. In addition,
statements and data presented in Section 11 are based on UN GHS calculation rules and classifications derived from
3M assessments.

11.1 Information on Toxicological effects

Signs and Symptoms of Exposure

Based on test data and/or information on the components, this material may produce the following health effects:

Inhalation

May be harmful if inhaled. Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge,
headache, hoarseness, and nose and throat pain. May cause target organ effects after inhalation.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 8 of 13

Skin contact

May be harmful in contact with skin.
Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain.

Eye contact

Contact with the eyes during product use is not expected to result in significant irritation.

Ingestion

Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea.
May cause target organ effects after ingestion.

Target Organ Effects:

Single exposure may cause:

Central nervous system (CNS) depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,
nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.

Toxicological Data

If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.

Acute Toxicity

Name Route Species Value

Overall product Dermal No data available; calculated ATE2,000 - 5,000

mg/kg

Overall product Inhalation-

Vapor(4 hr)

No data available; calculated ATE20 - 50 mg/l

Overall product Ingestion No data available; calculated ATE >5,000 mg/kg
NUC - Naphthol Spirits Inhalation-

Vapor

LC50 estimated to be 20 - 50 mg/l

NUC - Naphthol Spirits Dermal Rabbit LD50 > 3,000 mg/kg
NUC - Naphthol Spirits Ingestion Rat LD50 > 5,000 mg/kg
Distillates (petroleum), hydrotreated light Dermal Rabbit LD50 > 3,160 mg/kg
Distillates (petroleum), hydrotreated light Inhalation-

Dust/Mist
(4 hours)

Rat LC50 > 3.0 mg/l

Distillates (petroleum), hydrotreated light Ingestion Rat LD50 > 5,000 mg/kg
Siloxanes and silicones, di-Me Dermal Rabbit LD50 > 19,400 mg/kg
Siloxanes and silicones, di-Me Ingestion Rat LD50 > 17,000 mg/kg
Carnauba Wax Dermal LD50 estimated to be > 5,000 mg/kg
Carnauba Wax Ingestion Rat LD50 > 8,800 mg/kg
Oxidised polyethylene Ingestion Rat LD50 > 2,500 mg/kg

ATE = acute toxicity estimate

Skin Corrosion/Irritation

Name Species Value

NUC - Naphthol Spirits Rabbit Irritant
Distillates (petroleum), hydrotreated light Rabbit Mild irritant
Siloxanes and silicones, di-Me Rabbit No significant irritation
Carnauba Wax Professio

nal
judgemen
t

No significant irritation

Oxidised polyethylene No significant irritation

Serious Eye Damage/Irritation

Name Species Value

NUC - Naphthol Spirits Rabbit No significant irritation
Distillates (petroleum), hydrotreated light Rabbit Mild irritant
Siloxanes and silicones, di-Me Rabbit No significant irritation

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 9 of 13

Carnauba Wax Professio

nal
judgemen
t

No significant irritation

Oxidised polyethylene No significant irritation

Skin Sensitisation

Name Species Value

NUC - Naphthol Spirits Guinea

pig

Not sensitizing

Distillates (petroleum), hydrotreated light Guinea

pig

Not sensitizing

Respiratory Sensitisation

Name Species Value

Germ Cell Mutagenicity

Name Route Value

NUC - Naphthol Spirits In vivo Not mutagenic
NUC - Naphthol Spirits In Vitro Some positive data exist, but the data are not

sufficient for classification

Distillates (petroleum), hydrotreated light In Vitro Not mutagenic

Carcinogenicity

Name Route Species Value

NUC - Naphthol Spirits Dermal Mouse Some positive data exist, but the data are not

sufficient for classification

NUC - Naphthol Spirits Inhalation Human

and
animal

Some positive data exist, but the data are not
sufficient for classification

Distillates (petroleum), hydrotreated light Dermal Mouse Some positive data exist, but the data are not

sufficient for classification

Reproductive Toxicity

Reproductive and/or Developmental Effects

Name Route Value Species Test result Exposure

Duration

NUC - Naphthol Spirits Inhalation Not toxic to development Rat NOAEL 2.4

mg/l

during

organogenesis

Target Organ(s)

Specific Target Organ Toxicity - single exposure

Name Route Target Organ(s) Value Species Test result Exposure

Duration

NUC - Naphthol Spirits Inhalation central nervous

system depression

May cause drowsiness or
dizziness

Human
and
animal

NOAEL Not
available

NUC - Naphthol Spirits Inhalation respiratory irritation Some positive data exist, but the

data are not sufficient for
classification

NOAEL Not
available

NUC - Naphthol Spirits Inhalation nervous system Some positive data exist, but the

data are not sufficient for
classification

Dog NOAEL 6.5

mg/l

4 hours

Distillates (petroleum),
hydrotreated light

Inhalation central nervous

system depression

May cause drowsiness or
dizziness

Human
and
animal

NOAEL Not
available

Distillates (petroleum),
hydrotreated light

Inhalation respiratory irritation Some positive data exist, but the

data are not sufficient for
classification

NOAEL Not
available

Specific Target Organ Toxicity - repeated exposure

Name Route Target Organ(s) Value Species Test result Exposure

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 10 of 13

Duration

NUC - Naphthol Spirits Inhalation nervous system Some positive data exist, but the

data are not sufficient for
classification

Rat LOAEL 4.6

mg/l

6 months

NUC - Naphthol Spirits Inhalation kidney and/or

bladder

Some positive data exist, but the
data are not sufficient for
classification

Rat LOAEL 1.9

mg/l

13 weeks

NUC - Naphthol Spirits Inhalation respiratory system Some positive data exist, but the

data are not sufficient for
classification

Multiple
animal
species

NOAEL 0.6
mg/l

90 days

NUC - Naphthol Spirits Inhalation bone, teeth, nails,

and/or hair | blood |
liver | muscles

All data are negative Rat NOAEL 5.6

mg/l

12 weeks

NUC - Naphthol Spirits Inhalation heart All data are negative Multiple

animal
species

NOAEL 1.3
mg/l

90 days

Aspiration Hazard

Name Value

NUC - Naphthol Spirits Aspiration hazard
Distillates (petroleum), hydrotreated light Aspiration hazard

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

SECTION 12: Ecological information

The information below may not agree with the EU material classification in Section 2 and/or the ingredient
classifications in Section 3 if specific ingredient classifications are mandated by a competent authority. In addition,
statements and data presented in Section 12 are based on UN GHS calculation rules and classifications derived from
3M assessments.

12.1. Toxicity

No product test data available.

Material CAS Nbr Organism Type Exposure Test endpoint Test result

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for

classification
NUC ­Naphthol
Spirits

64742-48-9 Data not

available or

insufficient for

classification
Siloxanes and
silicones, di­Me

63148-62-9 Data not

available or

insufficient for

classification
Carnauba Wax 8015-86-9 Data not

available or

insufficient for

classification
Oxidised
polyethylene

68441-17-8 Data not

available or

insufficient for

classification

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 11 of 13

12.2. Persistence and degradability

Material CAS Nbr Test type Duration Study Type Test result Protocol

Siloxanes and
silicones, di­Me

63148-62-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

NUC ­Naphthol
Spirits

64742-48-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Oxidised
polyethylene

68441-17-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Carnauba Wax 8015-86-9 Modeled

Biodegradation

28 days BOD 82 % weight OECD 301F -

Manometric
respirometry

12.3 : Bioaccumulative potential

Material CAS Nbr Test type Duration Study Type Test result Protocol

NUC ­Naphthol
Spirits

64742-48-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Siloxanes and
silicones, di­Me

63148-62-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Oxidised
polyethylene

68441-17-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Carnauba Wax 8015-86-9 Modeled

Bioaccumulati
on

Log Kow 23.45 Other methods

12.4. Mobility in soil

Please contact manufacturer for more details

12.5. Results of the PBT and vPvB assessment

No information available at this time, contact manufacturer for more details

12.6. Other adverse effects

No information available.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 12 of 13

SECTION 13: Disposal considerations

13.1 Waste treatment methods

See Section 11.1 Information on toxicological effects

Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal
facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical
substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated &
disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective
regulating authorities to determine the available treatment and disposal facilities.

The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC ­2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor

EU waste code (product as sold)

070704* Other organic solvents, washing liquids and mother liquors

SECTION 14: Transportation information

ADR: UN1325 Flammable Solid, Organic, N.O.S. (Hydrotreated heavy naphtha (petroleum) and Hydrotreated light
petroleum distillates); 4.1; II; (E); F1
IMDG: UN1325 Flammable Solid, Organic, N.O.S. (Hydrotreated heavy naphtha (petroleum) and Hydrotreated light
petroleum distillates); 4.1; II; EmS: F-A, S-G
IATA: UN1325 Flammable Solid, Organic, N.O.S. (Hydrotreated heavy naphtha (petroleum) and Hydrotreated light
petroleum distillates); 4.1; II

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

Global inventory status

Contact manufacturer for more information The components of this product are in compliance with the chemical notification
requirements of TSCA.

15.2. Chemical Safety Assessment

Not applicable

SECTION 16: Other information

List of relevant H statements

EUH066 Repeated exposure may cause skin dryness or cracking.
H226 Flammable liquid and vapour.
H228 Flammable solid.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

List of relevant R-phrases

R10 Flammable.
R11 Highly flammable.

M87, Mirror Glaze High Temp Mold Release Wax (Original Formula): M8711

__________________________________________________________________________________________

Page: 13 of 13

R38 Irritating to skin.
R65 Harmful: May cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.

Revision information:

Revision Changes:
Section 8: Skin protection - recommended gloves information information was modified.
Safety phrase information was modified.
Section 3: Composition/ Information of ingredients table information was modified.
Section 12: Component ecotoxicity information information was modified.
Section 12: Persistence and Degradability information information was modified.
Section 12:Bioccumulative potential information information was modified.
Section 2: Label remarks information was modified.
Label: CLP Precautionary - Prevention information was modified.
Label: CLP Precautionary - Response information was modified.
CLP: Ingredient table information was modified.
Section 15: Label remarks and EU Detergent information was modified.
Section 8: Occupational exposure limit table information was modified.
OEL Reg Agency Desc information was modified.
Section 11: Aspiration Hazard Table information was modified.
Section 11: Acute Toxicity table information was modified.
Section 11: Carcinogenicity Table information was modified.
Section 11: Serious Eye Damage/Irritation Table information was modified.
Section 11: Germ Cell Mutagenicity Table information was modified.
Section 11: Skin Sensitization Table information was modified.
Section 11: Reproductive Toxicity Table information was modified.
Section 11: Skin Corrosion/Irritation Table information was modified.
Section 11: Target Organs - Repeated Table information was modified.
Section 11: Target Organs - Single Table information was modified.
Section 11: Health Effects - Skin information information was modified.
Section 11: Health Effects - Inhalation information information was modified.
Section 5: Fire - Extinguishing media information information was modified.
Section 5: Fire - Advice for fire fighters information information was modified.
Section 6: Accidental release clean-up information information was modified.
Section 7: Precautions safe handling information information was modified.
Section 8: Occupational exposure limit table information was added.
Section 12: Classification Warning information was added.
Section 11: Classification disclaimer information was added.
Section 11: Classification disclaimer information was deleted.
Section 12: Classification Warning information was deleted.

DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our
knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use
(except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the
product in combination with other materials. For these reasons, it is important that customers carry out their own test to
satisfy themselves as to the suitability of the product for their own intended applications.

Meguiar's, Inc. United Kingdom MSDSs are available at www.meguiars.co.uk