MEGUIAR'S M10 User Manual

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 1 of 15

Safety Data Sheet

Copyright, 2014, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.

Document group:

28-6366-0

Version number:

2.00

Revision date:

22/04/2014

Supersedes date:

27/01/2012

Transportation version number: 1.00 (29/07/2011)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the
company/undertaking

1.1. Product identifier

M10, Plastic Polish (original formulation): M1008

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Automotive.

1.3. Details of the supplier of the substance or mixture
Address:

Meguiars United Kingdom Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF

Telephone:

[phone]

E Mail:

[e-mail]

Website:

www.meguiars.co.uk

1.4. Emergency telephone number

[phone]

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008

CLASSIFICATION:

This material is not classified as hazardous according to Regulation (EC) No. 1272/2008, as amended, on classification,
labelling, and packaging of substances and mixtures.

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

This product is not classified as hazardous according to EU Directive 1999/45/EC.

2.2. Label elements

CLP REGULATION (EC) No 1272/2008

Not applicable

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 2 of 15

SUPPLEMENTAL INFORMATION

Supplemental Hazard Statements:

EUH210 Safety data sheet available on request.
EUH208 Contains Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-

isothiazol-3-one. May produce an allergic reaction.

Notes on labelling

H304 is not required on the label due to the product's viscosity

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

Not applicable

Notes on labelling

R65 is not required on the label due to the product's viscosity.

2.3. Other hazards

None known.

SECTION 3: Composition/information on ingredients

Ingredient CAS Nbr EU Inventory % by Wt Classification

Non-Hazardous Ingredients Mixture 50 - 70
Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-

149-8

10 - 30 Xn:R65 - Nota 4 (EU)

R10; R66; R67 (Self Classified)

Asp. Tox. 1, H304 (CLP)
Flam. Liq. 3, H226; STOT SE 3,
H336; EUH066 (Self Classified)

White mineral oil (petroleum) 8042-47-5 EINECS 232-

455-8

10 - 30 Xn:R65 (Self Classified)

Asp. Tox. 1, H304 (Self

Classified)
Conditioners Trade Secret < 5
Bentonite 1302-78-9 EINECS 215-

108-5

1 - 5

Glycerin 56-81-5 EINECS 200-

289-5

1 - 5

Mixture of 5-chloro-2-methyl-2H­isothiazol-3-one and 2-methyl-2H­isothiazol-3-one

55965-84-9 < 0.01 T:R23-24-25; C:R34; N:R50/53;

R43 (EU)

Acute Tox. 3, H331; Acute Tox.

3, H311; Acute Tox. 3, H301;

Skin Corr. 1B, H314; Skin Sens.

1A, H317; Aquatic Acute 1,

H400,M=10; Aquatic Chronic 1,

H410,M=10 (CLP)

Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components

For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS

SECTION 4: First aid measures

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 3 of 15

4.1. Description of first aid measures

Inhalation

Remove person to fresh air. If you feel unwell, get medical attention.

Skin contact

Wash with soap and water. If signs/symptoms develop, get medical attention.

Eye contact

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

If swallowed

Rinse mouth. If you feel unwell, get medical attention.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1 Information on toxicological effects

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Extinguishing media

In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

Closed containers exposed to heat from fire may build pressure and explode.

Hazardous Decomposition or By-Products

Substance Condition

Hydrocarbons. During combustion.
Carbon monoxide. During combustion.
Carbon dioxide. During combustion.
Irritant vapours or gases. During combustion.

5.3. Advice for fire-fighters

Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or
exhaust vapours, in accordance with good industrial hygiene practice. Warning: A motor could be an ignition source and
could cause flammable gases or vapours in the spill area to burn or explode. Refer to other sections of this SDS for
information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.

6.2. Environmental precautions

Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or
bodies of water.

6.3. Methods and material for containment and cleaning up

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 4 of 15

Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible.
Place in a closed container approved for transportation by appropriate authorities. Clean up residue with detergent and water.
Seal the container. Dispose of collected material as soon as possible.

6.4. Reference to other sections

Refer to Section 8 and Section 13 for more information

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when using
this product. Wash thoroughly after handling. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.)

7.2. Conditions for safe storage including any incompatibilities

Store away from acids. Store away from oxidising agents.

7.3. Specific end use(s)

See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational exposure limits

Ingredient CAS Nbr Agency Limit type Additional comments

Glycerin 56-81-5 Health and

Safety Comm.
(UK)

TWA(as mist):10 mg/m3

Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling

Biological limit values

No biological limit values exist for any of the components listed in Section 3 of this safety data sheet.

8.2. Exposure controls

8.2.1. Engineering controls

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face
protection(s) are recommended:
Safety glasses with side shields.

Skin/hand protection

Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 5 of 15

results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Nitrile rubber.
Polymer laminate

Respiratory protection

An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours

For questions about suitability for a specific application, consult with your respirator manufacturer.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state

Liquid.

Appearance/Odour

No appreciable odour; White, viscous lotion

Odour threshold

No data available.

pH

Not applicable.

Boiling point/boiling range

100 ºC

Melting point

Not applicable.

Flammability (solid, gas)

Not applicable.

Explosive properties

Not classified

Oxidising properties

Not classified

Flash point

> 93.3 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]

Autoignition temperature

No data available.

Flammable Limits(LEL)

No data available.

Flammable Limits(UEL)

No data available.

Vapour pressure

No data available.

Relative density

0.93 - 0.97 [Ref Std:WATER=1]

Water solubility

Moderate

Solubility- non-water

No data available.

Partition coefficient: n-octanol/water

No data available.

Evaporation rate

No data available.

Vapour density

No data available.

Decomposition temperature

No data available.

Viscosity

2.5 Pa-s - 3.5 Pa-s

Density

0.93 - 0.97 g/cm3

9.2. Other information

Volatile organic compounds (VOC)

14.54 % weight

VOC less H2O & exempt solvents

671.88 g/l

SECTION 10: Stability and reactivity

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 6 of 15

10.1 Reactivity

This material may be reactive with certain agents under certain conditions - see the remaining headings in this section

10.2 Chemical stability

Stable.

10.3 Possibility of hazardous reactions

Hazardous polymerisation will not occur.

10.4 Conditions to avoid

Temperatures above the boiling point.

10.5 Incompatible materials

Strong acids.
Strong oxidising agents.

10.6 Hazardous decomposition products

Substance Condition

None known.

Refer to section 5.2 for hazardous decomposition products during combustion.

SECTION 11: Toxicological information

The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labelling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.

11.1 Information on Toxicological effects

Signs and Symptoms of Exposure

Based on test data and/or information on the components, this material may produce the following health effects:

Inhalation

Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.

Skin contact

Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.

Eye contact

Contact with the eyes during product use is not expected to result in significant irritation.

Ingestion

Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea.

Toxicological Data

If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 7 of 15

Acute Toxicity

Name Route Species Value

Overall product Ingestion No data available; calculated ATE >5,000 mg/kg
White mineral oil (petroleum) Dermal Rabbit LD50 > 2,000 mg/kg
White mineral oil (petroleum) Ingestion Rat LD50 > 5,000 mg/kg
Distillates (petroleum), hydrotreated light Dermal Rabbit LD50 > 3,160 mg/kg
Distillates (petroleum), hydrotreated light Inhalation-

Dust/Mist
(4 hours)

Rat LC50 > 3.0 mg/l

Distillates (petroleum), hydrotreated light Ingestion Rat LD50 > 5,000 mg/kg
Glycerin Dermal Rabbit LD50 estimated to be > 5,000 mg/kg
Glycerin Ingestion Rat LD50 > 5,000 mg/kg
Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl­2H-isothiazol-3-one

Dermal Rabbit LD50 87 mg/kg

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl­2H-isothiazol-3-one

Inhalation­Dust/Mist
(4 hours)

Rat LC50 0.33 mg/l

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl­2H-isothiazol-3-one

Ingestion Rat LD50 40 mg/kg

ATE = acute toxicity estimate

Skin Corrosion/Irritation

Name Species Value

White mineral oil (petroleum) Rabbit No significant irritation
Distillates (petroleum), hydrotreated light Rabbit Mild irritant
Glycerin Rabbit No significant irritation
Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

Rabbit Corrosive

Serious Eye Damage/Irritation

Name Species Value

White mineral oil (petroleum) Rabbit Mild irritant
Distillates (petroleum), hydrotreated light Rabbit Mild irritant
Glycerin Rabbit No significant irritation
Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

Rabbit Corrosive

Skin Sensitisation

Name Species Value

White mineral oil (petroleum) Guinea

pig

Not sensitizing

Distillates (petroleum), hydrotreated light Guinea

pig

Not sensitizing

Glycerin Guinea

pig

Not sensitizing

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

Human
and
animal

Sensitising

Photosensitisation

Name Species Value

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

Human
and
animal

Not sensitizing

Respiratory Sensitisation

Name Species Value

Germ Cell Mutagenicity

Name Route Value

White mineral oil (petroleum) In Vitro Not mutagenic
Distillates (petroleum), hydrotreated light In Vitro Not mutagenic

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 8 of 15

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

In vivo Not mutagenic

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3­one

In Vitro Some positive data exist, but the data are not

sufficient for classification

Carcinogenicity

Name Route Species Value

White mineral oil (petroleum) Dermal Mouse Not carcinogenic
White mineral oil (petroleum) Inhalation Multiple

animal
species

Not carcinogenic

Distillates (petroleum), hydrotreated light Dermal Mouse Some positive data exist, but the data are not

sufficient for classification

Glycerin Ingestion Mouse Some positive data exist, but the data are not

sufficient for classification
Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl­2H-isothiazol-3-one

Dermal Mouse Not carcinogenic

Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl­2H-isothiazol-3-one

Ingestion Rat Not carcinogenic

Reproductive Toxicity

Reproductive and/or Developmental Effects

Name Route Value Species Test result Exposure

Duration

White mineral oil (petroleum) Ingestion Not toxic to female reproduction Rat NOAEL

4,350
mg/kg/day

13 weeks

White mineral oil (petroleum) Ingestion Not toxic to male reproduction Rat NOAEL

4,350
mg/kg/day

13 weeks

White mineral oil (petroleum) Ingestion Not toxic to development Rat NOAEL

4,350
mg/kg/day

during

gestation

Glycerin Ingestion Not toxic to female reproduction Rat NOAEL

2,000
mg/kg/day

2 generation

Glycerin Ingestion Not toxic to male reproduction Rat NOAEL

2,000
mg/kg/day

2 generation

Glycerin Ingestion Not toxic to development Rat NOAEL

2,000
mg/kg/day

2 generation

Mixture of 5-chloro-2-methyl-2H­isothiazol-3-one and 2-methyl-2H­isothiazol-3-one

Ingestion Not toxic to female reproduction Rat NOAEL 10

mg/kg/day

2 generation

Mixture of 5-chloro-2-methyl-2H­isothiazol-3-one and 2-methyl-2H­isothiazol-3-one

Ingestion Not toxic to male reproduction Rat NOAEL 10

mg/kg/day

2 generation

Mixture of 5-chloro-2-methyl-2H­isothiazol-3-one and 2-methyl-2H­isothiazol-3-one

Ingestion Not toxic to development Rat NOAEL 15

mg/kg/day

during

organogenesis

Target Organ(s)

Specific Target Organ Toxicity - single exposure

Name Route Target Organ(s) Value Species Test result Exposure

Duration

Distillates (petroleum),
hydrotreated light

Inhalation central nervous

system depression

May cause drowsiness or
dizziness

NOAEL Not

available
Distillates (petroleum),
hydrotreated light

Inhalation respiratory irritation Some positive data exist, but the

data are not sufficient for
classification

NOAEL Not

available

Mixture of 5-chloro-2­methyl-2H-isothiazol-3­one and 2-methyl-2H-

Inhalation respiratory irritation Some positive data exist, but the

data are not sufficient for
classification

similar
health
hazards

NOAEL Not

available

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 9 of 15

isothiazol-3-one

Specific Target Organ Toxicity - repeated exposure

Name Route Target Organ(s) Value Species Test result Exposure

Duration

White mineral oil
(petroleum)

Ingestion hematopoietic

system

Some positive data exist, but the
data are not sufficient for
classification

Rat NOAEL

1,381

mg/kg/day

90 days

White mineral oil
(petroleum)

Ingestion liver | immune

system

Some positive data exist, but the
data are not sufficient for
classification

Rat NOAEL

1,336

mg/kg/day

90 days

Glycerin Inhalation respiratory system Some positive data exist, but the

data are not sufficient for
classification

Rat NOAEL 3.91

mg/l

14 days

Glycerin Inhalation heart | liver | kidney

and/or bladder

All data are negative Rat NOAEL 3.91

mg/l

14 days

Glycerin Ingestion endocrine system |

hematopoietic
system | liver |
kidney and/or
bladder

All data are negative Rat NOAEL

10,000

mg/kg/day

2 years

Aspiration Hazard

Name Value

White mineral oil (petroleum) Aspiration hazard
Distillates (petroleum), hydrotreated light Aspiration hazard

Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.

SECTION 12: Ecological information

The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications
are mandated by a competent authority. Additional information leading to material classification in Section 2 is available
upon request. In addition, environmental fate and effects data on ingredients may not be reflected in this section because an
ingredient is present below the threshold for labelling, an ingredient is not expected to be available for exposure, or the data
is considered not relevant to the material as a whole.

12.1. Toxicity

No product test data available.

Material CAS Nbr Organism Type Exposure Test endpoint Test result

Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Rainbow trout Experimental 96 hours LC50 0.07 mg/l

Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Water flea Experimental 48 hours EC50 0.18 mg/l

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 10 of 15

Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Green algae Experimental 96 hours EC50 0.062 mg/l

Bentonite 1302-78-9 Rainbow trout Laboratory 96 hours LC50 >19,000 mg/l
Glycerin 56-81-5 Water flea Experimental 24 hours EC50 >10,000 mg/l
Glycerin 56-81-5 Goldfish Experimental 24 hours LC50 >5,000 mg/l
White mineral
oil (petroleum)

8042-47-5 Bluegill Experimental 96 hours Lethal Level

50%

>100 mg/l

Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Water flea Experimental 21 days NOEC 0.172 mg/l

White mineral
oil (petroleum)

8042-47-5 Water flea Experimental 21 days NOEC >100 mg/l

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for
classification

12.2. Persistence and degradability

Material CAS Nbr Test type Duration Study Type Test result Protocol

Bentonite 1302-78-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Glycerin 56-81-5 Experimental

Biodegradation

14 days BOD 63 % weight OECD 301C - MITI

test (I)
White mineral
oil (petroleum)

8042-47-5 Experimental

Biodegradation

28 days CO2 evolution 0 % weight OECD 301B -

Modified sturm or CO2
Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Experimental

Biodegradation

28 days CO2 evolution 48 % weight Other methods

12.3 : Bioaccumulative potential

Material CAS Nbr Test type Duration Study Type Test result Protocol

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 11 of 15

Bentonite 1302-78-9 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Distillates
(petroleum),
hydrotreated
light

64742-47-8 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Glycerin 56-81-5 Experimental

Bioconcentrati
on

Log Kow -1.76 Other methods

White mineral
oil (petroleum)

8042-47-5 Data not

available or
insufficient for
classification

N/A N/A N/A N/A

Mixture of 5­chloro-2­methyl-2H­isothiazol-3­one and 2­methyl-2H­isothiazol-3­one

55965-84-9 Estimated

Bioconcentrati
on

Log Kow 0.5 Other methods

12.4. Mobility in soil

Please contact manufacturer for more details

12.5. Results of the PBT and vPvB assessment

Ingredient CAS Nbr PBT/vPvB status
White mineral oil (petroleum) 8042-47-5 Meets REACH PBT criteria

12.6. Other adverse effects

No information available.

SECTION 13: Disposal considerations

13.1 Waste treatment methods

See Section 11.1 Information on toxicological effects

This product has been classified as a non-hazardous waste. Prior to disposal, consult all applicable authorities and regulations
to insure proper classification. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative,
incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during
incineration processes. Empty and clean product containers may be disposed as non-hazardous waste. Consult your specific
regulations and service providers to determine available options and requirements.

The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC ­2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional
regulations are complied with and always use a licensed waste contractor

EU waste code (product as sold)

20 01 13* Solvents

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 12 of 15

SECTION 14: Transportation information

ADR / IMDG / IATA: Not restricted for transport.

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

Global inventory status

Contact manufacturer for more information The components of this material are in compliance with the China "Measures on
Environmental Management of New Chemical Substance". Certain restrictions may apply. Contact the selling division for
additional information. The components of this material are in compliance with the provisions of the Korean Toxic Chemical
Control Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this
material are in compliance with the provisions of Australia National Industrial Chemical Notification and Assessment
Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information. The components
of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply.
Contact the selling division for additional information. The components of this product are in compliance with the new
substance notification requirements of CEPA. The components of this product are in compliance with the chemical
notification requirements of TSCA.

15.2. Chemical Safety Assessment

Not applicable

SECTION 16: Other information

List of relevant H statements

EUH066 Repeated exposure may cause skin dryness or cracking.
H226 Flammable liquid and vapour.
H301 Toxic if swallowed.
H304 May be fatal if swallowed and enters airways.
H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H331 Toxic if inhaled.
H336 May cause drowsiness or dizziness.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

List of relevant R-phrases

R10 Flammable.
R23 Toxic by inhalation.
R24 Toxic in contact with skin.
R25 Toxic if swallowed.
R34 Causes burns.
R43 May cause sensitisation by skin contact.
R50/53 Very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment.
R65 Harmful: May cause lung damage if swallowed.
R66 Repeated exposure may cause skin dryness or cracking.
R67 Vapours may cause drowsiness and dizziness.

Revision information:

Revision Changes:
Section 8: Skin protection - recommended gloves information information was modified.

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 13 of 15

Section 8: Respiratory protection - recommended respirators information information was modified.
Section 9: Viscosity information information was modified.
Section 16: List of relevant R phrase information information was modified.
Section 3: Composition/ Information of ingredients table information was modified.
Section 9: Flammability (solid, gas) information information was modified.
Section 16: Regulations - Inventories - EU ONLY information was modified.
Section 1: Address information was modified.
Copyright information was modified.
Section 8: Occupational exposure limit table information was modified.
Section 11: Aspiration Hazard Table information was modified.
Section 11: Acute Toxicity table information was modified.
Section 11: Carcinogenicity Table information was modified.
Section 11: Serious Eye Damage/Irritation Table information was modified.
Section 11: Germ Cell Mutagenicity Table information was modified.
Section 11: Skin Sensitization Table information was modified.
Section 11: Reproductive Toxicity Table information was modified.
Section 11: Skin Corrosion/Irritation Table information was modified.
Section 11: Target Organs - Repeated Table information was modified.
Section 11: Target Organs - Single Table information was modified.
Section 5: Fire - Extinguishing media information information was modified.
Section 6: Accidental release personal information information was modified.
Section 6: Accidental release environmental information information was modified.
Section 6: Accidental release clean-up information information was modified.
Section 7: Precautions safe handling information information was modified.
Section 7: Conditions safe storage information was modified.
Section 13: 13.1. Waste disposal note information was modified.
Section 13: Standard Phrase Category Waste GHS information was modified.
Two-column table displaying the unique list of H Codes and statements (std phrases) for all components of the given
material. information was modified.
Section 8: Respiratory protection - recommended respirators guide information was added.
Section 12: Component ecotoxicity information information was added.
Section 12: Persistence and Degradability information information was added.
Section 12:Bioccumulative potential information information was added.
Section 12: Component Ecotoxicity table Material column header information was added.
Section 12: Component Ecotoxicity table CAS No column header information was added.
Section 12: Component Ecotoxicity table Organism column header information was added.
Section 12: Component Ecotoxicity table Type column header information was added.
Section 12: Component Ecotoxicity table Exposure column header information was added.
Section 12: Component Ecotoxicity table End point column header information was added.
Section 12: Component Ecotoxicity table Result column header information was added.
Section 12: Persistence and degradability table Material column header information was added.
Section 12: Persistence and degradability table CAS No column header information was added.
Section 12: Persistence and degradability table Test Type column header information was added.
Section 12: Persistence and degradability table Duration column header information was added.
Section 12: Persistence and degradability table Test Result column header information was added.
Section 12: Persistence and degradability table Protocol column header information was added.
Section 12:Bioccumulative potential table Material column header information was added.
Section 12:Bioccumulative potential table CAS No column header information was added.
Section 12:Bioccumulative potential table CAS No column header information was added.
Section 12:Bioccumulative potential table Test Result column header information was added.
Section 12:Bioccumulative potential table Protocol column header information was added.
Section 12:Bioccumulative potential table Test Type column header information was added.
Label: CLP Classification - Header information was added.
Label: CLP Classification information was added.
Label: CLP Supplemental Hazard Statements information was added.
Label: CLP Supplemental Hazard Statements - Header information was added.

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 14 of 15

Label: CLP Supplemental Information - Header information was added.
Contains statement for sensitizers information was added.
Contains statement for sensitizers information was added.
Contains statement for sensitizers information was added.
Section 2: Notes on labelling heading information was added.
CLP Remark(phrase) information was added.
Section 11: Photosensitisation table - Name heading information was added.
Section 11: Photosensitisation table heading information was added.
Photosensitisation Table information was added.
Section 11: Photosensitisation table - Species heading information was added.
Section 11: Photosensitisation table - Value heading information was added.
Section 12: PBT/vPvB table CAS No. column heading information was added.
Section 12: PBT/vPvB table CAS No. column heading information was added.
Section 12: PBT/vPvB table PBT/vPvB Status column heading information was added.
Section 12: PBT/vPvB table row information was added.
Section 2: 2.2 & 2.3. CLP REGULATION heading information was added.
Section 8: Personal Protection - Eye information information was added.
Section 8: Personal Protection - Skin/hand information information was added.
Section 8: Personal Protection - Respiratory Information information was added.
Section 2.1: Classification information information was added.
Section 12: Persistence and degradability table Study Type column header information was added.
Section 12:Bioccumulative potential table Test Type column header information was added.
Section 9: Odour Threshold information was added.
Section 9: Solubility (non-water) information was added.
Section 09: Decomposition Temperature information was added.
Not applicable information was added.
Not applicable information was added.
Section 10: Hazardous decomposition products during combustion text information was added.
Section 11: Disclosed components not in tables text information was added.
Section 8: 8.1.1 Biological limit values table heading information was added.
Section 8: BLV information was added.
List of sensitizers information was added.
Section 9: Flammability (solid, gas) information information was added.
Risk phrase information was deleted.
Safety phrase information was deleted.
Section 8: Eye/face protection text information was deleted.
Section 8: Respiratory protection - recommended respirators information was deleted.
Section 2: Contains heading information was deleted.
Section 2: Safety phrases heading information was deleted.
Section 2: Risk phrases heading information was deleted.
Section 2: Symbols heading information was deleted.
Section 15: Symbol information information was deleted.
Section 2: Label ingredient information information was deleted.
Section 2: Label remarks information was deleted.
Prints No Data if Component ecotoxicity information is not present information was deleted.
Prints No Data if Persistence and Degradability information is not present information was deleted.
Prints No Data if Bioccumulative potential information is not present information was deleted.
Section 8: mg/m³ key information was deleted.
Section 8: ppm key information was deleted.
Section 11: Target Organ Effects heading information was deleted.
Section 11: Respiratory Sensitization Table information was deleted.
Section 11: UN GHS Classification table heading information was deleted.
Section 11: Health Effects - Other information information was deleted.
Section 12: No PBT/vPvB information available warning information was deleted.

DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our

M10, Plastic Polish (original formulation): M1008

__________________________________________________________________________________________

Page: 15 of 15

knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use
(except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the
product in combination with other materials. For these reasons, it is important that customers carry out their own test to
satisfy themselves as to the suitability of the product for their own intended applications.

Meguiar's, Inc. United Kingdom MSDSs are available at www.meguiars.co.uk