MEGUIAR'S M01 User Manual

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

__________________________________________________________________________________________

Page: 1 of 14

Safety Data Sheet

Copyright, 2012, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.

Document group:

28-5894-2

Version number:

2.02

Revision date:

30/07/2012

Supersedes date:

21/11/2011

Transportation version number: 1.00 (21/12/2010)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the
company/undertaking

1.1. Product identifier

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Automotive.

1.3. Details of the supplier of the substance or mixture
Address:

Meguiars United Kingdon Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF

Telephone:

[phone]

E Mail:

[e-mail]

Website:

www.meguiars.co.uk

1.4. Emergency telephone number

[phone]

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Indication of danger

Harmful; Xn; R48/20

For full text of R phrases, see Section 16.

2.2. Label elements

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

Symbols

Xn Harmful.

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

__________________________________________________________________________________________

Page: 2 of 14

Contains:

Tripoli

Risk phrases

R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.

Safety phrases

S22 Do not breathe dust.

Notes on labelling

R65 is not required on the label due to the product's viscosity.
Updated per Regulation (EC) 648/2004 on detergents.

Nota N applied for CASRN 64742-46-7.

2.3. Other hazards

None known.

SECTION 3: Composition/information on ingredients

Ingredient CAS Nbr EU Inventory % by Wt Classification

Non-hazardous ingredients Mixture 40 - 60
Tripoli 1317-95-9 15 - 40 Xn:R48/20 (Vendor)

STOT RE 1, H372 (Self
Classified)

Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-

149-8

5 - 10 Xn:R65 - Nota 4 (EU)

R10; R66; R67 (Self Classified)

Asp. Tox. 1, H304 (CLP)
Flam. Liq. 3, H226; STOT SE 3,
H336; EUH066 (Self Classified)

Distillates (petroleum), hydrotreated middle 64742-46-7 EINECS 265-

148-2

1 - 5 Nota N (EU)

Xn:R20-65; R66 (Self
Classified)

Nota N (CLP)
Acute Tox. 4, H332; Asp. Tox.
1, H304; STOT SE 3, H336;
EUH066 (Self Classified)

Glycerin 56-81-5 EINECS 200-

289-5

1 - 5

Processed oil Trade Secret 1 - 5
Conditioners Trade Secret < 5
Quartz 14808-60-7 EINECS 238-

878-4

<= 0.0372 Xn:R48/20 (Vendor)

STOT RE 1, H372 (Self

Classified)
Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components

For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

__________________________________________________________________________________________

Page: 3 of 14

SECTION 4: First aid measures

4.1. Description of first aid measures

Eye contact

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

Skin contact

Wash with soap and water. If signs/symptoms develop, get medical attention.

Inhalation

Remove person to fresh air. If you feel unwell, get medical attention.

If swallowed

Rinse mouth. If you feel unwell, get medical attention.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1 Information on toxicological effects

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Extinguishing media

In case of fire: Use a fire fighting agent suitable for flammable liquids and solids such as dry chemical or carbon dioxide.

5.2. Special hazards arising from the substance or mixture

Closed containers exposed to heat from fire may build pressure and explode.

Hazardous Decomposition or By-Products

Substance Condition

Hydrocarbons. During combustion.
Carbon monoxide. During combustion.
Carbon dioxide. During combustion.
Irritant vapours or gases. During combustion.

5.3. Advice for fire-fighters

Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation
to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Warning: A motor could be an ignition
source and could cause flammable gases or vapours in the spill area to burn or explode. Refer to other sections of this SDS
for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.

6.2. Environmental precautions

Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or
bodies of water.

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

__________________________________________________________________________________________

Page: 4 of 14

6.3. Methods and material for containment and cleaning up

Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible.
Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate
solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on
the solvent label and Safety Data Sheet. Seal the container. Dispose of collected material as soon as possible.

6.4. Reference to other sections

Refer to Section 8 and Section 13 for more information

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapours/spray.
Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after
handling. Use personal protective equipment (eg. gloves, respirators…) as required. Vapours may travel long distances
along the ground or floor to an ignition source and flash back. For industrial or professional use only. Avoid contact with
oxidising agents (eg. chlorine, chromic acid etc.)

7.2. Conditions for safe storage including any incompatibilities

Store away from acids. Store away from oxidising agents. Store away from strong bases. Store away from heat. Protect
from sunlight.

7.3. Specific end use(s)

See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational exposure limits

Ingredient CAS Nbr Agency Limit type Additional comments

Silica, crystalline (airborne
particles of respirable size)

1317-95-9 Health and

Safety Comm.
(UK)

TWA(respirable):0.1 mg/m3

Silica, crystalline (airborne
particles of respirable size)

14808-60-7 Health and

Safety Comm.
(UK)

TWA(respirable):0.1 mg/m3

Glycerin 56-81-5 Health and

Safety Comm.
(UK)

TWA(as mist):10 mg/m3

Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
ppm: parts per million
mg/m³: milligrams per cubic metre
CEIL: Ceiling

8.2. Exposure controls

8.2.1. Engineering controls

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure

M01, Mirror Glaze Medium-Cut Cleaner (21-91A): M0116, M0164

__________________________________________________________________________________________

Page: 5 of 14

Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Wear eye/face protection.
The following eye protection(s) are recommended: Safety glasses with side shields.

Skin/hand protection

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.

Respiratory protection

An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates

For questions about suitability for a specific application, consult with your respirator manufacturer.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Physical state

Liquid.

Appearance/Odour

No appreciable odour; White, viscous lotion

pH

5 - 6

Boiling point/boiling range

201.7 ºC

Melting point

Not applicable.

Flammability (solid, gas)

Not classified

Explosive properties

Not classified

Oxidising properties

Not classified

Flash point

93.3 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]

Autoignition temperature

No data available.

Flammable Limits(LEL)

No data available.

Flammable Limits(UEL)

No data available.

Vapour pressure

No data available.

Relative density

1.17 - 1.25 [Ref Std:WATER=1]

Water solubility

Moderate

Partition coefficient: n-octanol/water

No data available.

Evaporation rate

No data available.

Vapour density

No data available.

Viscosity

2.4 - 4.5 Pa-s

Density

1.17 - 1.25 g/cm3

9.2. Other information

Volatile organic compounds (VOC)

8.29 % weight

VOC less H2O & exempt solvents

372.26 g/l