MEGUIAR'S G95 User Manual

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

__________________________________________________________________________________________

Page: 1 of 15

Safety Data Sheet

Copyright, 2012, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.

Document group:

29-6122-5

Version number:

1.01

Revision date:

19/04/2012

Supersedes date:

31/01/2012

Transportation version number: 1.00 (31/01/2012)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the
company/undertaking

1.1. Product identifier

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Automotive.

1.3. Details of the supplier of the substance or mixture
Address:

Meguiars United Kingdon Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF

Telephone:

[phone]

E Mail:

[e-mail]

Website:

www.meguiars.co.uk

1.4. Emergency telephone number

[phone]

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Indication of danger

Corrosive.

2.2. Label elements

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

Symbols

C Corrosive.

Contains:

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

__________________________________________________________________________________________

Page: 2 of 15

No ingredients are assigned to the label.

Risk phrases

R35 Causes severe burns.

Safety phrases

S1/2 Keep locked up and out of reach of children.
S23C Do not breathe vapour or spray.
S51 Use only in well ventilated areas.
S36/37/39B Wear suitable protective clothing, gloves, and eye and face protection.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28C After contact with skin, wash immediately with plenty of water for 15 minutes.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where

possible).

Notes on labelling

Updated per Regulation (EC) 648/2004 on detergents.
Ingredients required per 648/2004: <5%: Anionic surfactant, EDTA and salts thereof, non-ionic surfactant.
R35 based on pH.

2.3. Other hazards

May cause chemical gastrointestinal burns. May cause chemical respiratory tract burns.

SECTION 3: Composition/information on ingredients

Ingredient CAS Nbr EU Inventory % by Wt Classification

Non-hazardous ingredients Mixture 75 - 95
N,N-Dimethyldecylamine N-oxide 2605-79-0 EINECS 220-

020-5

1 - 5 Xi:R38-41 (Vendor)

Skin Irrit. 2, H315; Eye Dam. 1,

H318 (Vendor)
Sulphonic acids, C14-16-alkane hydroxy
and C14-16-alkene, sodium salts

68439-57-6 EINECS 270-

407-8

1 - 5 Xn:R22; Xi:R41 (Self

Classified)

Acute Tox. 4, H302; Eye Dam.

1, H318 (Self Classified)
2-(Propyloxy)ethanol 2807-30-9 EINECS 220-

548-6

1 - 5 Xn:R21; Xi:R36 (EU)

Acute Tox. 4, H312; Eye Irrit. 2,

H319 (CLP)
Sodium Metasilicate 6834-92-0 EINECS 229-

912-9

1 - 5 C:R34; Xi:R37 (EU)

Skin Corr. 1B, H314; STOT SE

3, H335 (CLP)

Met. Corr. 1, H290 (Self

Classified)
Tetrasodium ethylenediaminetetraacetate 64-02-8 EINECS 200-

573-9

1 - 5 Xn:R22; Xi:R41 (EU)

Acute Tox. 4, H302; Eye Dam.

1, H318 (CLP)
Formaldehyde 50-00-0 EINECS 200-

001-8

<= 0.01 Carc.Cat.3:R40; T:R23-24-25;

C:R34; R43 - Nota B,D (EU)

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

__________________________________________________________________________________________

Page: 3 of 15

Acute Tox. 2, H330; Acute Tox.

3, H311; Acute Tox. 3, H301;

Skin Corr. 1B, H314; Skin Sens.

1, H317; Carc. 2, H351 - Nota

B,D (CLP)

Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components

For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS

SECTION 4: First aid measures

4.1. Description of first aid measures

Eye contact

Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue
rinsing. Immediately get medical attention.

Skin contact

Immediately flush with large amounts of water for at least 15 minutes. Remove contaminated clothing. Get immediate
medical attention. Wash clothing before reuse.

Inhalation

Remove person to fresh air. Get immediate medical attention.

If swallowed

Rinse mouth. Do not induce vomiting. Get immediate medical attention.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1 Information on toxicological effects

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Extinguishing media

In case of fire: Use a carbon dioxide or dry chemical extinguisher for extinction.

5.2. Special hazards arising from the substance or mixture

Closed containers exposed to heat from fire may build pressure and explode.

Hazardous Decomposition or By-Products

Substance Condition

Carbon monoxide. During combustion.
Carbon dioxide. During combustion.

5.3. Advice for fire-fighters

No unusual fire or explosion hazards are anticipated.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

__________________________________________________________________________________________

Page: 4 of 15

Evacuate area. Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and
health hazards, respiratory protection, ventilation, and personal protective equipment.

6.2. Environmental precautions

For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. Avoid release to the
environment.

6.3. Methods and material for containment and cleaning up

Contain spill. For large spills, if necessary, get assistance from professional spill clean up team. For small spills, carefully
neutralise spill by adding appropriate dilute acid such as vinegar. Work slowly to avoid boiling or spattering. Continue to add
neutralising agent until reaction stops. Let cool before collecting. Working from around the edges of the spill inward, cover
with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it
appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. Collect
as much of the spilled material as possible. Place in a metal container approved for use in transportation by appropriate
authorities. The container must be lined with polyethylene plastic or contain a plastic drum liner made of polyethylene. Clean
up residue with water. Cover, but do not seal for 48 hours. Dispose of collected material as soon as possible. Absorb
spillage to prevent material damage.

6.4. Reference to other sections

Refer to Section 8 and Section 13 for more information

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Wash contaminated clothing before
reuse. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.) Keep away from reactive metals (eg. Aluminum,
zinc etc.) to avoid the formation of hydrogen gas that could create an explosion hazard.

7.2. Conditions for safe storage including any incompatibilities

Keep only in original container. Store in corrosive resistant container. Store in a well-ventilated place. Keep container
tightly closed. Store away from heat. Protect from sunlight. Store away from acids. Store away from oxidising agents.

7.3. Specific end use(s)

See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and
personal protection recommendations.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Occupational exposure limits

Ingredient CAS Nbr Agency Limit type Additional comments

Formaldehyde 50-00-0 Health and

Safety Comm.
(UK)

TWA:2.5 mg/m3(2
ppm);STEL:2.5 mg/m3(2 ppm)

Health and Safety Comm. (UK) : UK Health and Safety Commission
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
ppm: parts per million
mg/m³: milligrams per cubic metre
CEIL: Ceiling

8.2. Exposure controls

G95, Hot Rims® All Wheel and Tyre Cleaner (24-57A): G9524

__________________________________________________________________________________________

Page: 5 of 15

8.2.1. Engineering controls

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.

8.2.2. Personal protective equipment (PPE)

Eye/face protection

Wear eye/face protection.
The following eye protection(s) are recommended: Full face shield.
Indirect vented goggles.

Skin/hand protection

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Wear
protective gloves, protective clothing, and eye/face protection.
Gloves made from the following material(s) are recommended: Neoprene.

The following protective clothing material(s) are recommended:Nitrile boots.
Neoprene boots.
Neoprene apron.
Apron - polymer laminate

Respiratory protection

Select and use respiratory protection to prevent an inhalation exposure based on the results of an exposure assessment.
Consult with your respirator manufacturer for selection of appropriate types of respirators.
Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with
regulations:
Half facepiece or fullface air-purifying respirator with organic vapour cartridges and P2 particulate prefilters.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state

Liquid.

Appearance/Odour

Mild odour; Clear

pH

13.56

Boiling point/boiling range

>=200 ºC

Melting point

No data available.

Flammability (solid, gas)

Not classified

Explosive properties

Not classified

Oxidising properties

Not classified

Flash point

Flash point > 93 °C (200 °F)

Autoignition temperature

No data available.

Flammable Limits(LEL)

No data available.

Flammable Limits(UEL)

No data available.

Vapour pressure

No data available.

Relative density

1.02 - 1.03

Water solubility

Complete

Partition coefficient: n-octanol/water

No data available.

Evaporation rate

No data available.

Vapour density

No data available.