MEGUIAR'S G75 User Manual

G75, Endurance Tire Gel (16-141E): G7516
__________________________________________________________________________________________
Page: 1 of 12
Safety Data Sheet
Copyright, 2014, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
27-4568-5
Version number:
5.00
Revision date:
21/03/2014
Supersedes date:
04/09/2013
Transportation version number: 1.00 (31/03/2010)
This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
G75, Endurance Tire Gel (16-141E): G7516
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Automotive.
1.3. Details of the supplier of the substance or mixture Address:
Meguiars United Kingdon Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF
Telephone:
+44 (0)870 241 6696
E Mail:
info@meguiars.co.uk
Website:
www.meguiars.co.uk
1.4. Emergency telephone number
+44 (0)870 241 6696
SECTION 2: Hazard identification
2.1. Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008
CLASSIFICATION:
Specific Target Organ Toxicity-Single Exposure, Category 3 - STOT SE 3; H336
For full text of H phrases, see Section 16.
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive Indication of danger
R66 R67
For full text of R phrases, see Section 16.
G75, Endurance Tire Gel (16-141E): G7516
__________________________________________________________________________________________
Page: 2 of 12
2.2. Label elements
CLP REGULATION (EC) No 1272/2008
SIGNAL WORD
WARNING!
Symbols:
GHS07 (Exclamation mark) |
Pictograms
Ingredient CAS Nbr % by Wt Distillates (petroleum), hydrotreated light 64742-47-8 10 - 30 Distillates (petroleum), hydrotreated middle 64742-46-7 10 - 30
HAZARD STATEMENTS:
H336 May cause drowsiness or dizziness.
PRECAUTIONARY STATEMENTS General:
P102 Keep out of reach of children. P101 If medical advice is needed, have product container or label at hand.
Prevention:
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area.
Disposal:
P501 Dispose of contents/container in accordance with applicable local/regional/national/international
regulations.
SUPPLEMENTAL INFORMATION
Supplemental Hazard Statements:
EUH066 Repeated exposure may cause skin dryness or cracking.
Contains 100% of components with unknown hazards to the aquatic environment.
Notes on labelling
H304 is not required on the label due to the product's viscosity Nota N applied to CAS# 64742-46-7.
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Symbol(s)
None.
G75, Endurance Tire Gel (16-141E): G7516
__________________________________________________________________________________________
Page: 3 of 12
Contains:
No ingredients are assigned to the label.
Risk phrases
R66 Repeated exposure may cause skin dryness or cracking. R67 Vapours may cause drowsiness and dizziness.
Safety phrases
S46 If swallowed, seek medical advice immediately and show this container or label. S2 Keep out of the reach of children.
Notes on labelling
R65 is not required on the label due to the product's viscosity.
Nota N applied to CAS# 64742-46-7.
2.3. Other hazards
None known.
SECTION 3: Composition/information on ingredients
Ingredient CAS Nbr EU Inventory % by Wt Classification
Siloxanes and silicones, di-Me 63148-62-9 50 - 70 Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-
149-8
10 - 30 Xn:R65 - Nota 4 (EU)
R10; R66; R67 (Self Classified)
Asp. Tox. 1, H304 (CLP) Flam. Liq. 3, H226; STOT SE 3, H336; EUH066 (Self Classified)
Distillates (petroleum), hydrotreated middle 64742-46-7 EINECS 265-
148-2
10 - 30 Nota N (EU)
Xn:R20-65; R66 (Self Classified)
Nota N (CLP) Acute Tox. 4, H332; Asp. Tox. 1, H304; STOT SE 3, H336;
EUH066 (Self Classified) Please see section 16 for the full text of any R phrases and H statements referred to in this section Please refer to section 15 for the any applicable Notas that have been applied to the above components
For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
Remove person to fresh air. If you feel unwell, get medical attention.
Skin contact
Wash with soap and water. If signs/symptoms develop, get medical attention.
Eye contact
G75, Endurance Tire Gel (16-141E): G7516
__________________________________________________________________________________________
Page: 4 of 12
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
If swallowed
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1 Information on toxicological effects
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Extinguishing media
In case of fire: Use a fire fighting agent suitable for flammable liquids and solids such as dry chemical or carbon dioxide to extinguish.
5.2. Special hazards arising from the substance or mixture
Closed containers exposed to heat from fire may build pressure and explode.
Hazardous Decomposition or By-Products
Substance Condition
Formaldehyde During combustion. Carbon monoxide. During combustion. Carbon dioxide. During combustion. Irritant vapours or gases. During combustion.
5.3. Advice for fire-fighters
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Warning: A motor could be an ignition source and could cause flammable gases or vapours in the spill area to burn or explode. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water.
6.3. Methods and material for containment and cleaning up
Contain spill. Cover spill area with a fire-extinguishing foam. An appropriate aqueous film forming foam (AFFF) is recommended. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible using non-sparking tools. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and Safety Data Sheet. Dispose of collected material as soon as possible.
Loading...
+ 8 hidden pages