MEGUIAR'S G156 User Manual

G156, XF Metal Polish Paste (22-111B): G15605

__________________________________________________________________________________________

Page: 1 of 13

Safety Data Sheet

Copyright, 2014, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of
properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes
unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise
distributed with the intention of earning a profit thereon.

Document group:

31-1143-2

Version number:

2.00

Revision date:

29/04/2014

Supersedes date:

06/11/2013

Transportation version number: 1.00 (06/11/2013)

This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.

SECTION 1: Identification of the substance/mixture and of the
company/undertaking

1.1. Product identifier

G156, XF Metal Polish Paste (22-111B): G15605

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Automotive.

1.3. Details of the supplier of the substance or mixture
Address:

Meguiars United Kingdom Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF

Telephone:

[phone]

E Mail:

[e-mail]

Website:

www.meguiars.co.uk

1.4. Emergency telephone number

[phone]

SECTION 2: Hazard identification

2.1. Classification of the substance or mixture

CLP REGULATION (EC) No 1272/2008

CLASSIFICATION:

Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315
Specific Target Organ Toxicity-Single Exposure, Category 3 - STOT SE 3; H336
Specific Target Organ Toxicity-Repeated Exposure, Category 1 - STOT RE 1; H372

For full text of H phrases, see Section 16.

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Indication of danger

Irritant; Xi; R38
Harmful; Xn; R48/20

G156, XF Metal Polish Paste (22-111B): G15605

__________________________________________________________________________________________

Page: 2 of 13

R67

For full text of R phrases, see Section 16.

2.2. Label elements

CLP REGULATION (EC) No 1272/2008

SIGNAL WORD

DANGER!

Symbols:

GHS07 (Exclamation mark) | GHS08 (Health Hazard) |

Pictograms

Ingredient CAS Nbr % by Wt
Alkanes, C12-14-iso- 68551-19-9 30 - 60
Solvent naphtha (petroleum), medium aliphatic 64742-88-7 10 - 30

HAZARD STATEMENTS:

H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

H372 Causes damage to organs through prolonged or repeated exposure: nervous system

PRECAUTIONARY STATEMENTS
General:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.

Prevention:

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.

Response:

P332 + P313 If skin irritation occurs: Get medical advice/attention.

Disposal:

P501 Dispose of contents/container in accordance with applicable local/regional/national/international

regulations.

38% of the mixture consists of components of unknown acute oral toxicity.

Contains 68% of components with unknown hazards to the aquatic environment.

Notes on labelling

H304 is not required on the label due to the product's viscosity

Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive

G156, XF Metal Polish Paste (22-111B): G15605

__________________________________________________________________________________________

Page: 3 of 13

Symbol(s)

Harmful

Contains:

Solvent naphtha (petroleum), medium aliphatic

Risk phrases

R38 Irritating to skin.
R67 Vapours may cause drowsiness and dizziness.
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.

Safety phrases

S23A Do not breathe vapour.
S46 If swallowed, seek medical advice immediately and show this container or label.
S2 Keep out of the reach of children.

Notes on labelling

R65 is not required on the label due to the product's viscosity.

2.3. Other hazards

None known.

SECTION 3: Composition/information on ingredients

Ingredient CAS Nbr EU Inventory % by Wt Classification

Alkanes, C12-14-iso- 68551-19-9 EINECS 271-

369-5

30 - 60 Xn:R65; R66; R67 (Vendor)

Asp. Tox. 1, H304; STOT SE 3,

H336; EUH066 (Vendor)
Solvent naphtha (petroleum), medium
aliphatic

64742-88-7 EINECS 265-

191-7

10 - 30 Xn:R48/20; Xn:R65 (EU)

Xi:R38; R10 (Self Classified)

Asp. Tox. 1, H304; STOT RE 1,

H372 (CLP)

Flam. Liq. 3, H226; Skin Irrit. 2,

H315 (Self Classified)
Aluminium Oxide 1344-28-1 EINECS 215-

691-6

10 - 30

Fatty acids, montan-wax 68476-03-9 EINECS 270-

664-6

7 - 13

Stearic Acid 57-11-4 EINECS 200-

313-4

1 - 5

Please see section 16 for the full text of any R phrases and H statements referred to in this section
Please refer to section 15 for the any applicable Notas that have been applied to the above components

For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS

SECTION 4: First aid measures

4.1. Description of first aid measures

G156, XF Metal Polish Paste (22-111B): G15605

__________________________________________________________________________________________

Page: 4 of 13

Inhalation

Remove person to fresh air. If you feel unwell, get medical attention.

Skin contact

Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop,
get medical attention.

Eye contact

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

If swallowed

Rinse mouth. If you feel unwell, get medical attention.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1 Information on toxicological effects

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Extinguishing media

In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

None inherent in this product.

Hazardous Decomposition or By-Products

Substance Condition

Carbon monoxide. During combustion.
Carbon dioxide. During combustion.

5.3. Advice for fire-fighters

No unusual fire or explosion hazards are anticipated.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Ventilate the area with fresh air.

6.2. Environmental precautions

Avoid release to the environment.

6.3. Methods and material for containment and cleaning up

Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic
absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not
remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed
container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a
qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and
Safety Data Sheet. Seal the container. Dispose of collected material as soon as possible.

6.4. Reference to other sections